We will be exhibiting at "FOOMA JAPAN 2019 International Food Industry Exhibition."

High power for reduced heating time! Stainless container with a heater that can warm up in a short time.

1. Compact Equipment The heater unit is directly attached to the container, making the equipment compact and space-efficient. Since all the devices are mounted on the container, moving it is easy. 2. No Initial Cost Chillers with both heating and cooling functions are expensive and have a higher initial cost compared to heaters. If only heating of the jacket is needed, heaters are overwhelmingly more cost-effective in terms of initial investment. 3. Can Quickly Heat the Jacket By adopting a 7.5kW heater, the water in the jacket can be heated to high temperatures in a short time, warming the contents. Product Features - The heater is installed in the jacket section, allowing for liquid heating with just this unit. - It has a dry-run prevention feature, so the heater stops when the water in the jacket is low. - Equipped with a level gauge to check the water level in the jacket. - The temperature of the mixed liquid can be adjusted through the linkage between the thermometer and the heater. - A stirrer can be attached to the container, allowing for uniform heating of the contents. As this is a made-to-order product, modifications to "dimensions" and "materials" can be made, as well as custom processing to suit specific applications.

• tank

This is an original air motor mixer from Nitto Metal Industry. It is ideal for preventing foaming during mixing and for stirring high-viscosity liquids.

- It can stir in a sealed state with a Heller connection. Pressure reduction is also possible. - It can stir liquids with low to medium-high viscosity. - It comes standard with a waste receiver to prevent contamination from wear particles generated at the shaft seal. - The stirring body is a Bernoulli flow stirring body type BEAG E, which is less likely to incorporate air. (Patent No. 6169207) - It can be used in explosion-proof areas. - Made entirely of stainless steel, it is resistant to rust and hygienic. - It can be used without lubrication, so there is no oil splatter. For more details, please visit our website. https://www.monovate.co.jp/shop/g/gntma-s/

• Mixer/agitator

This is an original electric motor stirrer from Nitto Metal Industry. It is ideal for preventing foaming during stirring and for stirring high-viscosity liquids.

- It features an easy-to-remove and attach connection. - It can stir in a sealed state and is usable under both pressurized and vacuum conditions. - It can stir liquids with low to medium-high viscosity. - It comes standard with a debris collector to prevent contamination from wear particles generated at the shaft seal. - The stirring element is a Bernoulli flow stirring element type BEAG E, which is designed to minimize air entrapment. (Patent No. 6169207) - It is equipped with a standard controller that allows for speed adjustment. For more details, please visit our website. https://www.monovate.co.jp/shop/g/gntme-a/

• Other energy equipment

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including our new product, the Pillow Packaging Full Air Tightness Inspection Machine MSQ-2003. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to visit us at this opportunity. 【 Exhibition Name 】 JAPAN PACK 2025 Japan Packaging Industry Exhibition https://www.japanpack.jp/ 【 Dates 】 October 7 (Tuesday) to October 10 (Friday), 2025 *4 days 10:00 AM to 5:00 PM 【 Venue / Booth Number 】 Tokyo Big Sight / East Hall 8, Booth 8-505

HP Inc. will hold the "HP Future of Work AI Conference 2025" at Tokyo International Forum, Hall B. At this event, under the message "Freedom to be particular about how we work," we will introduce the possibilities of on-device AI and its practical applications, along with case studies and technological trends. Whether you are considering implementing AI or have already started using it, you are sure to find hints for your next steps. We sincerely look forward to your attendance.

Nitto Kohki will exhibit at the "30th Mechanical Components Technology Exhibition [Tokyo]" held at Makuhari Messe Hall 5 from July 9 (Wednesday) to July 11 (Friday). [Booth Number: Hall 5 31-32] At this exhibition, we will showcase a variety of products, including the electric suction hand "e-VEE" with a built-in pump that does not require compressed air, a cordless belt sander, the electric driver "Delvo" that can be mounted on robots, and the "Flow Monitor" that allows for easy visualization of the flow of cooling water in molds and other applications.

Providing Solutions to Support Your Business Challenges We warmly invite you to visit our booth at K 2025 to learn more about our approach and explore our latest innovations. 【K 2025】 – The World's No.1 Trade Fair for Plastics and Rubber Exhibition Dates : October 8 (Wed) – October 15 (Wed), 2025 Venue : Messe Düsseldorf, Düsseldorf, Germany Opening Hours : 10:00 AM – 6:00 PM (local time) MATSUI Booth : Hall 11 – Booth I53

[Lecturer] Kazuhisa Yuki, Professor, Department of Mechanical Engineering, Faculty of Engineering, Yamaguchi University of Science and Technology [Key Lecture Content] Currently, the world is facing a serious energy crisis and environmental issues. Particularly, due to the rapidly growing highly information-oriented society, the power demand of global AI data centers is expected to double from the 2024 level, surpassing Japan's total electricity consumption. In the future, to achieve a rich highly information-oriented society while maintaining carbon neutrality, securing a cheap and stable power supply is essential, and energy conservation in data centers will become the most important challenge. Against this backdrop, two-phase liquid immersion cooling technology, which can significantly reduce power input associated with cooling while achieving high cooling performance, is attracting attention. In this lecture, we will discuss efficient cooling technologies for data centers, evaluated based on cooling performance (air cooling/liquid cooling/liquid immersion technology), and outline the potential and technical challenges of liquid immersion cooling technology in particular.