We will be exhibiting at the 19th Optical Communication Technology Exhibition 'FOE2019' from July 17 (Wednesday) to July 19 (Friday), 2019!

The 1U size allows for space-saving, enabling large-capacity long-distance transmission and reduction of fiber costs through center interconnection.

The transmission port features detachable 8 pairs of multi-rate SFP/SFP+ ports, capable of transmitting up to 80G in a single-core/dual-core bidirectional configuration or 40G in two sets of single-core bidirectional using WDM. Optionally, high-density WDM filters and amplifiers can be added within the same chassis, enabling space-saving long-distance transmission. This allows for significant total cost reductions in fiber costs and network nodes. The transmission ports can be paired and used independently as 8 separate repeaters (media converters). *DCWDM2108 allows for mixed port configurations such as 1GE/OC48/10GE/OC192, but rate conversion is not possible. It is equipped with local and remote monitoring functions (SNMP/syslog) via LAN and OSC, as well as local monitoring through a serial console and office alarm contacts.

• VPN/Wide Area Ethernet
• LAN construction and wiring work
• Other network tools

10G OTN repeater series compatible with 2-channel multi-service.

OTN61002 is a 10G OTN repeater that supports 2-channel multi-service. It can operate as a remote terminal in point-to-point applications or applications using the DCWDM2108H series. FEC functionality is applied for each channel, achieving excellent communication performance with an average coding gain of 10%. 【Features】 ◆ 2-channel transponder card ◆ Compliant with ITU G.709 and G.975 I.4 ◆ Supports GFEC or EFEC functionality ◆ In-band management features (remote configuration and performance monitoring) ◆ Can be used as a remote standalone device without a local management card ◆ Dying GASP functionality ◆ Planned in-band monitoring/management support via management card* *For more details about the product, please contact us directly.

• VPN/Wide Area Ethernet
• Other network tools

【Regular price @28,000~】Ultra-compact 1Gbps media converter with excellent cost performance at a low price.

The MMC-1GFT series is a compact design optical media converter that supports 1Gbps. The features of this media converter are designed to easily and affordably connect two types of segments. The MMC series can be used not only as a standalone device but also as a slide-in module for a 1RU size rack (MMC-CH12) that can accommodate up to 12 units. The MMC series also supports the "LFP (Link Fault Pass Through) function." The MMC series caters to broadband applications, making it easy to achieve a more comfortable network.

• Routers, Switches, and Hubs
• VPN/Wide Area Ethernet
• LAN construction and wiring work

【List Price @98,000~】A highly cost-effective ultra-compact 10Gbps media converter that can also convert 1G to 10G at a low price.

The MMC-10GFT series is a compact design optical media converter that supports 10Gbps. The features of this media converter are designed to easily and affordably connect two types of segments. The MMC series can be used not only as a standalone device but also as a slide-in module for a 1RU size rack (MMC-CH12) that can accommodate up to 12 units. The MMC series supports broadband applications and easily enables a more comfortable network.

• Routers, Switches, and Hubs
• VPN/Wide Area Ethernet
• LAN construction and wiring work

【Regular price @98,000~】Ultra-compact 10Gbps repeater with excellent cost performance at a low price.

The MMC-10G2F series is a compact, multi-rate compatible SFP+ optical repeater (media converter). This media converter is designed to easily and affordably connect two types of segments. The MMC series can be used not only as a standalone device but also as a slide-in module for a 1RU size rack (MMC-CH12) that can accommodate up to 12 units. The MMC series also supports "LFP (Link Fault Pass Through) functionality." The MMC series is compatible with broadband applications, making it easy to achieve a more comfortable network.

• Routers, Switches, and Hubs
• VPN/Wide Area Ethernet
• LAN construction and wiring work

We offer a variety of speed and distance (link budget) models compatible with industrial networks, along with a comprehensive lineup of optical transceiver modules.

Many devices such as Layer 2/3 switches, servers, PC NICs, and media converters have been released that utilize optical transceiver modules compliant with MSA standards like CFP/QSFP+/XFP/SFP. By simply changing the optical module, a wide range of network applications such as server area networks, campus area networks, and metropolitan area networks can be realized. Data Controls Co., Ltd. offers a comprehensive lineup of optical transceiver modules with various speeds, distances (link budgets), and models compatible with industrial networks. *For more details, please refer to the catalog. Feel free to contact us as well.*

• Routers, Switches, and Hubs
• VPN/Wide Area Ethernet
• LAN construction and wiring work

You can replace the test module without turning off the power! Network measuring instrument.

The "NuStreams-700/-2000i" is a network measurement device that supports a wide range of interfaces including 40G (NuStreams-700)/10G Ethernet, Gigabit Ethernet, and 10/100Mbps, allowing for various types of testing. All slots are hot-swappable, enabling the replacement of test modules without turning off the power to the device. Additionally, testing can be conducted by operating the device from PC software configured with a chassis/interface module. Frames can be freely generated for each port/module, allowing for performance measurement from individual devices to the entire network. Other benchmark tests based on RFC can also be performed. 【Features】 ■ Intuitive utility software for monitoring system temperature and fan speed ■ All ports are hot-swappable ■ Synchronized testing between cards ■ Multi-user mode support (allowing multiple users to simultaneously use the chassis and modules) *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other network tools

<Title> Development of Gene Expression Control Technology through RNA Hacking In the latest presentation paper, we have utilized Abby. Associate Professor Yosuke Katsuta from Kumamoto University Graduate School of Advanced Science and Technology, Analytical Chemistry Laboratory (also co-founder of StapleBio), will be giving a presentation in an online seminar. He is working on the development of RNA hacking technology aimed at controlling gene expression by utilizing short nucleic acids named Staple to change the higher-order structure of target mRNA. He will present the latest data focusing on the results of cell experiments and animal experiments in the development of this technology. Related paper on the presentation content: Staple oligomers induce a stable RNA G-quadruplex structure for protein translation inhibition in therapeutics | Nature Biomedical Engineering

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.