【Tokyo Event: For 3 Days Starting Tomorrow】Cooling, Transporting, Blowing Away! We will hold a special exhibition of Sanwa Pneumatic Equipment.

A compact spot cooler that generates ultra-low temperature air with a maximum temperature difference of -75°C just by connecting compressed air.

The Kolder is a simplified spot cooler that applies the principle of vortex. Without using a power supply or refrigerant gas, it discharges ultra-low temperature air with a maximum temperature difference of -75°C (at a supply pressure of 0.7 MPa, in the case of model 190-75SV) simply by connecting compressed air. A typical application of the generated cooling air is the removal of heat generated during the processing of materials such as metals and plastics, and it demonstrates excellent effectiveness, especially in the processing of hard materials and high-viscosity substances (such as titanium alloys, stainless steel, nickel alloys, and thermoplastic plastics). Additionally, the cooling effect on workpieces and tools leads to improved cutting speeds and extended tool life, making it particularly suitable for dry cutting of magnesium alloys. Furthermore, it is effectively utilized as a cooling source for various spot cooling applications, including preventing heat-related issues in electrical control boxes and various measuring instrument boxes, cooling molds, and cooling tests for semiconductors and PC boards. *For more details, please refer to the basic information and downloadable materials at the bottom of the page.

• Pneumatic Equipment

No power supply needed. This is a cabinet cooling (heat dissipation) dedicated spot cooler that operates solely on compressed air.

The "cabinet cooler" reduces overheating inside NC or CNC cabinets, electrical control panels, motor boxes, surveillance cameras, various measuring instruments, etc., protecting precision machinery and measuring instruments from malfunction or damage due to overheating. Additionally, the automatic exhaust mechanism of the cabinet cooler keeps the inside of the cabinet in a pressurized state with cooling air at all times, preventing the intrusion of dust and mist from outside the cabinet and protecting electronic devices from contamination. By using a thermostat and solenoid valve, it is possible to regulate the temperature inside the box and reduce the amount of compressed air consumed.

• Other environmental equipment

The Coanda effect generates a thin, uniform curtain-like laminar flow. Its applications are diverse, including drainage, drying, heat dissipation blowing, and cooling.

The "Line Blow" is an air tool that generates a uniform curtain-like airflow simply by connecting compressed air. It is available in a lineup ranging from 150mm to 900mm in width, depending on the usage conditions for tasks such as draining, drying, and blowing away. ◆ Are you having trouble selecting piping components? ◆ >>> Product selection is available at the Satellite Showroom <<< In April 2018, we opened a Satellite Showroom in Odaiba displaying approximately 2,500 items as a new initiative to improve customer satisfaction in industrial piping components. [See]・[Touch]・[Sit]・[Choose] Our specialized staff will assist you in product selection. Please feel free to contact us. For those coming by train: Get off at Yurikamome "Telecom Center" Station and walk about 2 minutes. 【Contact Information】 TEL: 048-871-0501 Satellite Showroom Weekdays: Monday to Friday 10:00 AM to 5:00 PM

• Hydraulic Equipment

Suction and blow, two functions in one device. It is a tool that enables powerful vacuuming and blowing.

The air amplification air blow nozzle "Round Blow" uses compressed air as its power source, sucking in a large amount of surrounding air and expelling it. The "Round Blow" can be used in two roles: as a vacuum system or as a powerful air blow device.

• nozzle

This is a tool designed for blowing around pipes and cables. The air flow that blows out evenly at 360° enables drainage, cleaning, and drying.

The cylindrical airflow generator "Circle Blow" is an air nozzle that emits a cylindrical stream of air at high speed from a thin slit, attracting and amplifying a large amount of surrounding air to create a powerful annular amplification flow. The amplified flow, which blows evenly and uniformly in 360°, is effective for draining, cleaning, drying, and cooling long products such as pipes, cables, and extrusion rods. The hole diameter ranges from 25mm to 180mm.

• Pneumatic Equipment

It is small enough to fit in the palm of your hand, yet capable of powerful vacuuming and blowing.

The jet blower is a palm-sized air volume amplifier that generates a powerful vacuum pressure by blowing compressed air from slits provided along the inner wall of the main body, attracting a large amount of surrounding air from one side while expelling a large volume of amplified air from the other side. With a duct hose, it can be used for dust collection and recovery of debris, smoke, and particulate or fibrous materials, as well as for pneumatic conveying. Without a duct hose, it can be used for draining water after cleaning products or parts, as well as for drying, cooling, and blowing away cutting chips and debris.

• Pneumatic Equipment

It was manufactured for the purpose of air transportation using compressed air. During operation, it does not require a power supply, making it suitable for use in explosive environments.

The conveyor back is a device that enables air transport through a powerful vacuum pressure generated by compressed air as the power source. It has no moving parts and does not require a power supply, making it effective in environments where explosion-proof measures are required, as well as for the transport and exhaust of gas and mist.

• Pneumatic Equipment

No tools needed, anyone can freely position it.

The "Stay Hose" is a hose for blow nozzles that allows for free positioning without the use of tools. It is an ideal product for precise positioning of blow nozzles on the worksite, as it enables "bending, returning, and holding" without the need for tools.

• hose

"Blow," "drain," "dry" - spot blow with amplified air.

This is a blow nozzle that ranges from air volume amplification type to high thrust type. Air volume focused type Equivalent to direct injection into pipes with a diameter of 2 to 4 mm Material: Made of aluminum, stainless steel Thrust focused type Equivalent to direct injection into pipes with a diameter of 2 to 4 mm Material: Made of stainless steel

• nozzle

Cool it! Blow it away! Send it! Sanwa pneumatic equipment is an air tool that enables cooling, blowing, drying, and transfer simply by connecting compressed air.

The compact and easy-to-operate Sanwa pneumatic equipment, including the ultra-low temperature air generator "Kolder," which boasts nearly 40 years of experience, contributes to environmental improvement and productivity enhancement in various manufacturing sites.

• Pneumatic Equipment

We will be exhibiting at the "Kyushu Printing Information Industry Exhibition 2026" held at the Fukuoka International Center. During the event, we will showcase various products. We invite all related parties to come together and visit us. 【Suppliers】 ・Laser-X

This year, Toyota Kikan will exhibit at the Toyota Business Fair. We will introduce products that are useful for heatstroke prevention and more. Our top recommendation is SPACECOOL. Please feel free to visit our booth! SPACECOOL is an "eco-friendly cooling solution" essential for the future of our planet's environment! Be sure to check it out. Also, take a look at the basic knowledge for heat prevention in factories moving forward.

In the operation of drawings, do you face challenges such as "taking too long to find," "uncertainty about whether it's the latest version," or "high likelihood of confirmation errors"? By utilizing CADSUPER's barcode function (optional), you can reliably connect drawings and information, allowing for a smooth advancement of DX in drawing utilization. In this seminar, we will introduce how using barcodes can change: - Drawing management and search - Confirmation and cross-checking tasks - Information collaboration with the field This content is recommended not only for existing users but also for those considering improving the efficiency of drawing operations and reducing errors.

Daitō Shikō Co., Ltd. will be exhibiting at the "International Fire and Disaster Prevention Exhibition" held at Shirakawa Park in Nagoya City, Aichi Prefecture, from Thursday, May 28, 2026. At the exhibition venue, we plan to showcase goods that are perfect for fire prevention events and recruitment activities for members. If you are looking for SP tools, promotional items, or novelties, please be sure to visit our booth.

[Speaker] Miho Ko Shimada, Partner Attorney, Mori Hamada & Matsumoto Law Firm, Foreign Law Joint Enterprise [Key Lecture Content] The movement towards the implementation of CCS, which is positioned as an essential technology for decarbonizing hard-to-abate industries, is gaining momentum in Japan. Among the "advanced CCS projects" selected for business commencement in the early 2030s, some pipeline projects have progressed to the exploratory drilling stage. For shipping transport projects, discussions are underway to create mechanisms for clustering CO2 sources and improving shipping transport efficiency. In this seminar, following the full enforcement of the CCS Business Act on May 22, we will organize the current state of the business environment related to CCS and examine the latest discussions at the Agency for Natural Resources and Energy and the Ministry of the Environment (based on information available at the time of the event) from a legal perspective as we consider the shape of CCS projects leading to Final Investment Decision (FID). [Lecture Items] 1. Current state of the business environment related to CCS 2. Overview of the CCS Business Act 3. Overview of the cost difference support system for CCS projects (pipelines) 4. Structural considerations through the CCS value chain 5. Q&A / Business card exchange