[Limited to 100 units] *One unit provided free of charge* Emergency sealed straight LED light fixture VCMA-V2, damp-proof and waterproof emergency LED light fixture VYAA Monitoring Campaign!!

Contributing to the all-LED lighting in industrial areas! Launching fluorescent lamp alternatives equipped with LED emergency light units and sealed emergency LED lighting fixtures.

The sealed emergency LED lighting fixtures (VCMA series) comply with protection rating IP55 and can be installed in indoor environments where dust is generated or in outdoor environments without a roof. Utilizing our unique optical design technology, we ensure efficient brightness in both normal and emergency situations through light distribution control. Particularly during emergency lighting, the installation spacing can be wider than traditional light sources (fluorescent lamps), allowing for a reduction in the number of units installed and lowering initial costs. The straight tube LED lamp, which serves as the light source during normal operation, is housed in a highly sealed lamp protection cover, making it resistant to dirt and corrosion, and protecting the lamp from external impacts. Since a straight tube LED lamp is used, lamp replacement is possible. During a power outage, the emergency light source is consolidated at the end of the fixture and lights up using a built-in battery. When installed in the same area as the sealed LED fixtures (LCMA series), the design can be unified. Additionally, a lamp monitor (green) lights up to indicate the charging status of the emergency light at a glance. If the green lamp is lit during normal operation, it indicates normal function; if the lamp monitor is off, it is time to replace the rechargeable battery due to its lifespan. The estimated lifespan of the rechargeable battery is 4 to 6 years. Battery replacement can be easily and quickly performed while the fixture is installed.

• LED lighting

This single unit provides reliable lighting for both normal and emergency situations! It is a waterproof emergency lighting fixture with an IP55 protection rating, suitable for outdoor use.

The moisture-proof and waterproof emergency LED lighting fixtures (VYAA and VYBA series) comply with protection rating IP55 and can be installed in indoor environments where dust is generated or in outdoor environments without a roof. The inherent energy consumption efficiency is 142 lm/W (*1), achieving one of the highest energy efficiencies in the industry for waterproof emergency LED lighting fixtures. Additionally, by offering two types of body materials—stainless steel for the LYAA series and steel plate for the LYBA series—we provide a total of 160 models with a rich variety of products, allowing you to choose the optimal model according to the installation location. Separate from the light source that operates normally, the emergency light source, which lights up during a power outage using a built-in rechargeable battery, is consolidated at the end of the fixture. When installed in the same area as the moisture-proof and waterproof LED fixtures (LYAA and LYBA series), the design can be unified. Furthermore, the installation spacing during emergency lighting can be wider than that of conventional light sources (fluorescent lamps), allowing for a reduction in the number of installations. This helps to keep initial costs down during new installations or upgrades. <Product Variations> Total of 160 models Brightness: 5 types Mounting types: 8 types Body materials: 2 types Light source color (color temperature): 2 types

• LED lighting

You can estimate the required number of units and brightness with your computer! Would you like to save time on lighting design?

The simple lighting calculation software "STAR LIGHTER" from Hoshi and Denki allows for easy lighting design. Additionally, it can calculate the number of fixtures and average illuminance for new installations or updates. It enables various lighting calculations for both indoor and outdoor settings, and it can also create illuminance distribution maps for a single lamp, thus improving operational efficiency compared to traditional methods. Please give it a try. 【Features】 - Capable of calculating the number of fixtures for indoor use - Easy creation of illuminance distribution maps - Conducts illuminance calculations for outdoor settings and creates horizontal illuminance distribution maps *For more details, please contact us or refer to the catalog. -------------------------------------------------------- You can also download it from our website. Please check it out below.

• LED lighting

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, and management: Are you facing any issues with the challenges you currently have or selecting the right sensors for parking lot management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Basic Guide to Vehicle Detection Sensors This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document introduces the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

Thank you very much for visiting our company website and catalog, and for your interest in our diesel engine generators. From customer surveys, we received the following feedback as the most common requests: - I want to see the actual generators that have been installed. - I want to see the operation under actual load. - I want to hear the opinions of companies that have installed the generators. - I want to see the operating generators before making a purchase. After all, it’s understandable to be concerned about purchasing a generator without seeing the actual unit first, right? As the saying goes, "Seeing is believing..." we will be holding this tour. It is located in that area of the Kanto region where the maximum temperature exceeds 40°C during the summer. We successfully operated it again this summer, so we are confident about handling the heat (sweat)... Furthermore, it has been confirmed that it is "fuel-efficient" due to the world-leading "Scania engine" installed. This will surely help reduce daily operating costs. Please note that while we will provide kind and courteous assistance, the meeting point and dispersal will be at the site (transportation costs and other expenses will be borne by the customer), so please understand this in advance. Contact: Kaneko