AAEON Industrial Fanless Embedded PC Japanese Catalog 2019 Vol 1

Fanless embedded compact PC for industrial use equipped with Intel Celeron N3350/Pentium N4220, supporting a wide temperature range.

It is equipped with the following features for an industrial fanless PC: ● Intel Pentium N4200 / Celeron N3350 processor ● Slim chassis with a thickness of 42mm ● Abundant I/O options (COM x 4, HDMI, VGA, USB ports, etc.) ● Wide operating temperature range of -30℃ to 60℃ ● Equipped with 2 Gigabit Ethernet and 4 USB ports ● Wall mount compatible

• Industrial PCs

Industrial fanless embedded compact PC equipped with Intel Celeron N3350/Pentium N4220, supporting wide temperature range, DC input.

It is an industrial fanless compact PC with the following features: ● Equipped with Intel Pentium N4200 / Celeron N3350 processors ● Slim chassis with a thickness of 37mm ● Rich I/O options (COM x 3, HDMI, VGA, USB ports, etc.) ● Wide operating temperature range of -30℃ to 60℃ ● Equipped with 2 Gigabit Ethernet ports and 4 USB ports ● Wall mount compatible

• controller
• Industrial PCs
• Embedded Board Computers

AAEON Industrial Ultra-Compact Fanless PC, compatible with DC 12-24V input, RS-232×1, VGA×1, USB×2.

It is an industrial fanless ultra-compact PC with the following features: ● Equipped with 2 Gigabit LAN ports ● 1 x 2.5-inch HDD/SSD bay ● 1 x USB 3.0 port ● Supports 8-bit programmable digital input/output ● Compatible with 12-24V DC input

• controller
• Industrial PCs
• Embedded Board Computers

AAEON Intel Celeron J1900/N2807 Ultra-Compact Industrial Fanless PC (LAN x 4, HDMI x 2 ports)

This is an industrial fanless PC with the following features: ● Palm-sized ultra-compact design (166 mm x 106.6 mm x 30 mm) ● Only 30 mm thick ● Equipped with 4 LAN ports and 2 HDMI ports ● Operating temperature range of -30°C to 65°C

• controller
• Industrial PCs
• Embedded Board Computers

AAEON Wide Temperature Range Ultra-Compact Fanless Industrial Embedded PC with 4 LAN Ports and 2 HDMI Ports, Operating Temperature -30°C to 75°C

It is an industrial embedded fanless PC with the following features: ● Equipped with 4 Gigabit LAN ports ● 2 HDMI ports ● USB 3.0 compatible ports ● Aluminum casing, palm-sized ● Wide temperature operation range from -30°C to 70°C ● Compatible with VESA 75 and DIN mounting using separately sold VESA mount and DIN mount brackets

• controller
• Industrial PCs
• Embedded Board Computers

AAEON industrial fanless embedded PC RS-232×4 + RS232/422/485×2 equipped with Intel N4200/N3350

The industrial fanless embedded PC has the following features: ● Equipped with Intel(R) Pentium(R) N4200 2.5GHz / Celeron(R) N3350 2.4GHz ● DDR3L 1866 SODIMM x 1 slot (up to 8GB) ● Total of 6 COM ports: RS-232/422/485 x 2 + RS-232 x 4 ● USB 3.0 x 4 ● Supports VGA + HDMI output ● 2.5-inch drive bay x 1, mSATA x 1 slot ● AAEON's Hi-Safe compliant ● DC 9~24V input compatible ● Wide temperature range of -20°C to 60°C ● AT/ATX switch, remote power ON/OFF switch

• controller
• Industrial PCs
• Embedded Board Computers

AAEON Wide Temperature Range Industrial Fanless Ultra-Compact PC LAN×4 HDMI×2 -30 to 70℃ Compatible (when equipped with CFast)

This industrial fanless ultra-compact PC has the following features: ● Equipped with 4 Gigabit LAN ports, making it an ideal small PC for network appliances ● 1 x 2.5-inch HDD/SSD bay ● Equipped with USB 3.0 ports ● CFast slot on the side for easy installation ● Operating temperature range of 30°C to 75°C

• controller
• Industrial PCs
• Embedded Board Computers

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is kept to a minimum. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

"MI-170 series" With RS-232C communication, measurement result output and setting data input/output can be performed. Up to 8 types of condition settings, such as upper and lower limit settings, can be configured. Pressure sensors can be selected from 4 types based on accuracy, gauge pressure, and differential pressure. The mounting size conforms to the DIN96 standard. By combining with the separate type air leak tester LPU-100 series, it can also be used as an air leak tester. "DG-960 series" Pressure sensors can be selected from 4 types based on accuracy, gauge pressure, and differential pressure. The mounting size conforms to the DIN96 standard. "MIZ-0175 series" A new multi-indicator that enhances the functionality of the versatile and high-performance conventional model "MI-170," improving operability and visibility through downsizing and the adoption of an LCD display. It allows a maximum sampling rate of 4000 times per second for stable measurements and is equipped with various correction functions and noise cancellation features, providing a wealth of functionalities.

● What is a flow meter? Flow meters measure flow rates using mass flow meters or laminar flow meters and perform pass/fail judgments based on flow rate criteria. They are ideal for measuring airflow and conducting performance tests. "FMZ-1063 series" This is a flow tester equipped with a mass flow meter. It offers high precision of ± 3.5 % of R.D. ± 1 digit (in the normal flow range). It features a time-saving function (scan measurement). The FMZ-1063 is a compact, all-in-one flow tester with various functions. "FU series" This is a flow measurement unit that integrates laminar and differential pressure sensors, making it smaller and lighter. When connected to a display indicator (model: MI-170), it can provide direct flow readings as well as pressure and flow judgments. "FLF-110 series" This is a laminar flow meter capable of measuring a wide range of flow rates from 2 NmL/min to 500 NL/min.

What is an Air Leak Tester? An "Air Leak Tester" is a device that pressurizes the inside (or outside) of a sealed workpiece with air and determines the presence of leaks based on pressure changes. When a master with no leaks and a workpiece with leaks are pressurized, the pressure on the workpiece side decreases, creating a pressure difference between the two. By measuring this pressure difference, the presence of leaks can be determined. Generally, differential pressure air leak testing is widely used, but Fukuda also offers products that utilize direct pressure leak testing and flow meters according to the leak rate, in addition to differential pressure leak testers. Since the air leak tester uses air as the measurement medium, it incurs no running costs and is environmentally friendly.