Torque management tool for plastic screws

Achieve simple torque management for plastic screws!

"Plastic screws have weak mechanical strength and cannot be used." "They can break due to over-torque during fastening." "Torque management is cumbersome and increases work time." The "Torque Management Tool" for plastic screws has the following features to prevent the breaking of plastic screws: 1. Simple torque management It can rotate freely at the specified torque value, allowing for fastening without excess or deficiency. 2. Tightening and loosening Both tightening and loosening can be done with a single screwdriver. 3. Accuracy ±10% High precision management of ultra-low torque is possible. 4. Click sensation The click sensation can be clearly felt even in noisy environments. 5. Assembled type It can be reused by replacing worn-out parts. 6. Low price We can offer the torque management tool at a low price. *For more details, please refer to the PDF document or feel free to contact us. *The online shop is here → https://www.chemisnetshopping.co.jp/

• Tool Sets

A super small screw with no worries about rust and excellent strength. Issues with heat, friction, and insulation are resolved immediately!

The new product "RENY/PEEK Micro Chemis Screw" is a plastic screw that surpasses the conventional "RENY/PEEK Micro Screw" in strength. It is available in three sizes: M1.2, M1.4, and M1.6, and other sizes can be manufactured upon request. Although it has a hole shape that requires a specialized tool, its torsional breaking strength has increased by 150% to 200% compared to the conventional model. Two types of specialized tools are available: a dedicated precision screwdriver and a dedicated bit. It is heat-resistant and can also be used for insulation purposes, making it suitable as a substitute for metal screws in applications such as precision electronic components and the motor parts of model trains. 【Features】 ■ Strength that withstands harsh environments such as high temperatures and friction ■ High quality with gate remnants of 0.2mm or less ■ Continuous use temperature: 105 degrees for RENY material, 180 degrees for PEEK material *For more details, please refer to the PDF document or feel free to contact us. *Online shop here → https://www.chemisnetshopping.co.jp/

• Other machine elements

"Micro screws," the smallest class of plastic screws in the world.

Plastic micro screws are among the smallest screws in the world for molded plastic screws. In addition to standard type 0, type 1, we can also produce type 0, type 3 and custom shapes, and we can manufacture dedicated tools as well. Plastic micro screws have a proven track record as precision components in applications such as flow pumps, eyewear parts, electronic components, model parts, medical devices, plating equipment parts, and semiconductor equipment parts. *For more details, please refer to the PDF document or feel free to contact us. *Our online shop is here → https://www.chemisnetshopping.co.jp/

• Engineering Plastics

The world's smallest micro screw has been created using high-strength RENY material!

RENY material is a crystalline engineering plastic based on polyamide MXD6, reinforced with 50% glass fiber. It is the strongest material among plastic screws. This time, the world's smallest micro screw has been created using the high-strength RENY material. The sizes are M1.2, M1.4, and M1.6, with lengths of 2.5L and 4L, respectively. It has a proven track record in insulation applications, such as precision electronic components and the motor parts of model trains. *For more details, please refer to the PDF document or feel free to contact us. *The online shop is here → https://www.chemisnetshopping.co.jp/

• Other machine elements

We explain the operating principle of the GP200 series metal seal type pressure-based mass flow meter (P-MFC) in a video. (English) https://www.youtube.com/watch?v=ZWB03A_9fo8 Video Chapters 00:00 - What is Brooks Instrument? 01:00 - What is a conventional pressure-based MFC? 02:10 - Introduction to the GP200 pressure-based MFC 03:30 - Advantages of the GP200 MFC 03:50 - Pressure measurement method of the GP200 MFC 04:45 - Superiority of the GP200 This pressure-based mass flow meter adopts a unique design that overcomes the limitations of conventional pressure-based MFCs and significantly improves process performance.

The low-voltage fuse "SBFC-MS" is a slow blow fuse that can withstand temporary overcurrents and only blows under continuous overcurrent conditions. In automobiles, it is particularly effective for devices that experience momentary spikes in current. It is recommended for those facing challenges related to circuit protection in the automotive industry, construction machinery industry, and low-voltage fuses (below DC70V).

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

● What is a pneumatic regulator? It is a self-developed pneumatic regulator with a control reproducibility of ±0.1%. We offer a wide range of products from low flow to high flow. ● What is a regulator? Please use it to adjust the test pressure for leak testing. By supplying a stable test pressure, it enables more accurate measurements.

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. It is recommended for making doors that use touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Capable of detecting mask-wearing and measuring body temperature simultaneously with face recognition. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and alerts via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.