A new lineup of Bernoulli mixers has been introduced.

A manufacturer specializing in liquid mixing has produced it! Here is a summary of the features of the mixer equipped with the Bernoulli flow mixing body BEAG.

The Bernoulli flow mixer introduced in this document is a mixer equipped with the Bernoulli flow stirring body BEAG. The Bernoulli flow stirring body BEAG utilizes centrifugal force. By utilizing the pressure difference created by centrifugal force, it stirs liquids uniformly. A characteristic of BEAG is that it does not have stirring blades like propellers or holes for utilizing centrifugal force. The Bernoulli flow mixer is recommended for customers who are facing the following issues: - They are dealing with high-viscosity liquids that are difficult to mix, causing delays in stirring operations. - The liquid is settling, making it hard to stir. - They want to eliminate air entrapment. - They want to use it in a sealed and pressure-resistant manner. - They want to prevent foreign matter contamination from the shaft. This document summarizes the mechanism of BEAG's stirring and the centrifugal mixer equipped with BEAG. Please take a look.

• Mixer/agitator

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling and tripping of wired cables × Cable disconnection or damage × Worry about forgetting to turn on the switch after temporarily stopping the sensor. × Want to be notified of bed exit even from a location away from the nurse call outlet. Such concerns can be resolved simply by connecting to a wireless set linked to the nurse call system! Our nurse call linked wireless set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed, alleviating concerns about tripping and falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations away from the nurse call outlet, allowing for more flexible equipment placement.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

Hotron's vehicle detection sensors allow you to search for products that meet your needs in three categories: "Purpose of Use," "Location of Use," and "Product List." The sensors detect the passage of vehicles, alerting you with rotating lights or switching the display of parking availability. They manage vehicle presence, full parking, and exit warnings in parking lots, contributing to safe driving and smooth operational management within the parking area. They are used in various settings, from coin-operated parking to large-scale parking lots.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

SPACECOOL Co., Ltd. is pleased to announce that it will jointly exhibit a booth with Ronsir Co., Ltd. at the "Hokkaido Energy Technology Innovation EXPO 2025," which will be held at Access Sapporo (Hokkaido) from October 8 (Wednesday) to October 9 (Thursday), 2025. Due to recent extreme heat, heat mitigation measures are also being sought in Hokkaido. At this exhibition, we will introduce heat mitigation strategies for buildings and outdoor equipment using SPACECOOL, along with actual implementation examples in Hokkaido, in collaboration with Ronsir Co., Ltd. Main Exhibition Content SPACECOOL Co., Ltd. - Explanation of SPACECOOL technology and introduction of actual implementation examples - Samples of SPACECOOL products (films, magnetic sheets, membrane materials, etc.) Ronsir Co., Ltd.: Innovation Proof RR - Actual model and implementation examples of the SPACECOOL integrated waterproof sheet "Innovation Proof RR" - Temperature sensation device for Innovation Proof RR Exhibition Overview Dates: October 8 (Wednesday) to October 9 (Thursday), 2025, 10:00 AM to 4:00 PM Venue: Hokkaido, Access Sapporo Our booth number: 405 (2 booths) *Advance registration is required for attendance (free).