[Demo Equipment Rental] We are currently offering demo equipment rental for industrial cleaners and adhesive rollers!

Rich lineup! Featuring cleaners that remove almost all fine dust【Demo units available for loan】.

This catalog introduces the hand cleaner series handled by Audio-Technica Corporation. All models feature a unique adhesive roller designed to efficiently remove dust, material residues, and more from surfaces such as resin plates, glass, various films and sheets, and metal plates, thanks to its adhesive strength. We offer a wide range of products, including the "HC-700 Series," which can accommodate various materials, and the "HC-700FE Series," which achieves high durability and low contamination. [Contents (excerpt)] ■ HC-700 Series ■ mini HC Series ■ HC-700CNT Series ■ HC-700FE Series ■ HC-700S Series *For more details, please refer to the PDF document or feel free to contact us.

• Other cleaning tools
• Hand cleaner

All models use a unique adhesive roller! It can remove almost all fine dust【Demo unit available for loan】.

"TechniClean" is an industrial cleaning device that employs a unique adhesive roller for all models. Its purpose is to efficiently remove dust, material residues, and static electricity adhering to resin boards, glass, various films and sheets, metal plates, etc., through adhesive power. The butyl synthetic rubber roller specification has minimal component transfer to materials, allowing for stable long-term use. The silicone rubber roller specification uses cleaning tape and emphasizes a cleaning method focused on stability. We offer a wide range of products. [Features] ■ Abundant conveyor options ■ Cleaning operation ■ Selectable material effective width ■ Capable of cleaning various materials *For more details, please refer to the PDF document or feel free to contact us.

• Printing Machinery
• Ceramics
• Industrial Vacuum Cleaners

Static electricity removal effect of the deionizing device, achieving powerful cleaning with a rotating brush! [Dust removal / Deionizing cleaner]

The "DTC-X30 series" is a cleaner equipped with a brush unit that removes dust from the workpiece by first neutralizing the electrostatic adhesion of dust using an electrostatic eliminator, and then sweeping it away with a rotating brush and collecting it with a dust collector's suction power. Additionally, a sticky roller is used for finishing, achieving more powerful cleaning and preventing early saturation of the sticky roller. Available in three sizes: DTC-230 to DTC-630. 【Features】 ■ Effective width of material: 130 to 600 mm ■ Double-sided dry cleaning with rotating brush and sticky roller ■ AC corona discharge type ■ Gear and chain drive ■ Brush rotation direction can be switched between forward and reverse *For more details, please refer to the PDF document or feel free to contact us.

• Industrial Vacuum Cleaners

Reversible operation, continuous, automatic one-way, and automatic reciprocating cleaning is possible 【Dust removal/Electrostatic removal cleaner】

The "TCT-X40 Series" is a cleaner that reliably transfers dirt caught by the adhesive roller from the workpiece to the cleaning tape, maintaining the cleanliness of the roller. The roller and tape can be easily pulled out from the main unit, allowing for simple tape cutting and roller cleaning. Additionally, with PLC control, it enables reversible operation, continuous operation, automatic one-way operation, and automatic reciprocating cleaning. 【Features】 - Reliably cleans dirt caught by the adhesive roller from the workpiece - Transfers it to the tape, maintaining the cleanliness of the roller - Allows for easy tape cutting and roller cleaning - Capable of dual-sided cleaning through continuous operation and automatic one-way operation - Offers the option to select combinations of butyl synthetic rubber rollers, increasing the variety of rubber material options for the materials *For more details, please refer to the PDF document or feel free to contact us.

• Industrial Vacuum Cleaners
• Other cleaning tools

Double-sided dry cleaning with adhesive rollers and rotating vibrating brushes! A cleaning device for small materials!

The "Compact Series" is a cleaning device for ultra-small materials. It compactly incorporates the performance of the conventional series, allowing for the instant removal of dust and static electricity from small materials, FPC, TAB, and other electronic materials. We offer models such as the "TC/DC-130," which adds a rotating brush to the "TC-130," as well as the "TC-280" and "TC/DC-280," which can accommodate a wide range of materials. 【Features】 ■ Each roller can be easily removed ■ Easy maintenance ■ Butyl-based synthetic rubber ■ Instant removal of dust and static electricity from electronic materials *For more details, please refer to the PDF document or feel free to contact us.

• Industrial Vacuum Cleaners

This is a high-performance cleaning device that supports dust removal and static elimination before and after thin film processes such as thin films, LTCC substrates, and green sheets (50 microns and above).

The "TC-SUX30 series" is a cleaner that our customers have come to love as our standard model. It offers a rich variety of rubber adhesion strength and machine sizes, accommodating various materials. We have six sizes available, ranging from TC-SU230 to TC-1230. In addition to standard conveyors, we provide specifications tailored to customer needs by combining flat belt conveyors and mini conveyors. 【Features】 - The entire unit is covered except for the material inlet and outlet, protecting the rollers from airborne dust. - Six adhesive rollers and four cleaning rollers. - With the adoption of PLC, reversible operation is possible, as well as continuous, automatic one-way, and automatic reciprocating cleaning. - Equipped with an anti-wrapping belt mechanism that allows cleaning of thin films. - Each model offers conveyor options: - Mini conveyor (dimensions: 400mm) - Conveyor (dimensions: 700mm) *For more details, please refer to the PDF document or feel free to contact us.

• Industrial Vacuum Cleaners
• Other cleaning tools

Achieves powerful cleaning through static electricity removal and a rotating brush to sweep away dust, finished with a sticky roller. [Dust Removal/Electrostatic Cleaner]

The cleaner DTC-630 with a brush unit removes static electricity from the workpiece using an electrostatic removal device, which releases the adhesion of dust on the workpiece. It then sweeps away the dust with a rotating brush and collects it using the suction power of a dust collector. Additionally, it finishes with a sticky roller for more powerful cleaning and prevents early saturation of the sticky roller. There are three sizes available: DTC-230, DTC-430, and DTC-630. *For more details, please refer to the PDF document or feel free to contact us.*

• Other cleaning tools

[To the owners of parking lots and parking lot construction companies] "I'm worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those facing sidewalks or roadways are particularly prone to dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surroundings with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Vehicle Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

Automate pressure control and use it as a pressure/back pressure regulator! The Auto Pressure Controller "SLA/SLAMf Series" is equipped with a wealth of options and features. By combining the SLA/SLAMf Series with mass flow controllers and meters, you can achieve consistency in control (process) with the advantages of a single platform. The SLA/SLAMf Series uses a primary flow calibration system that is traceable to international standards, characterized by high precision, long-term stability of the zero point, and excellent reproducibility based on our superior measurement systems and methods. Applications: ■ Thin film processes ■ Catalyst research and pilot processes in chemical and petrochemical industries ■ Laboratory and analytical systems ■ Fuel cell technology ■ Life sciences bioreactors

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. It is recommended for making doors that use touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Capable of detecting mask-wearing and measuring body temperature simultaneously with face recognition. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and alerts via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

A world where miniaturization and high performance are advancing daily. Mobile phones now have features that were unimaginable just a few years ago. The realization of such high performance is thanks to thin film technology, which is utilized in a wide range of applications as follows: 【Applications of Thin Film Technology】 - Microelectronics - Anti-reflective coatings for glass - Antibacterial metal coatings for medical devices - Flexible solar cells Thin film technology is defined as "the process of creating, coating, and processing thin film materials on a substrate surface." We are currently publishing basic knowledge materials on glass coatings for the glass industry! ⚫ Glass Coatings ⚫ What is Low-E Glass? ⚫ Laminating and Materials of Low-E Coatings ⚫ Application Requirements ⚫ What is Low-E Coating Technology? ⚫ Glass Coating Market Please take a moment to read it. https://mono.ipros.com/news/detail/129167/

Thank you very much for your continued support. At STJ Group (Santec Telecom Japan Co., Ltd. and STJ Rentech Co., Ltd.), we regret to inform you that our year-end and New Year holiday schedule will be as follows. We apologize for any inconvenience this may cause and appreciate your understanding. ■ Year-End and New Year Holiday Schedule From Tuesday, December 30, 2025, to Sunday, January 4, 2026 * Last acceptance date for the year: Thursday, December 25 * Last shipping date for the year: Friday, December 26 * Monday, December 29, is the last business day of the year. Inquiries and consultations will be accepted. ■ Business Resumption Date Starting Monday, January 5, 2026 During this period, we anticipate significant delays in sales and other responses due to manufacturer holidays. We apologize for any inconvenience and appreciate your understanding. Regarding inquiries made via the web, we will respond after Monday, January 5, 2026. Thank you for your understanding in advance. Our website will still be available for use during the holiday period. We look forward to your continued patronage next year.