【A must-see for those who want to know more!】With a minimum thickness of 1.8mm, it can be integrated into devices! A thin and lightweight UHF band RFID reading sheet antenna.

【More details】With a minimum thickness of 1.8mm, it can be integrated into devices! Introducing the features of a thin and lightweight UHF band RFID reading sheet antenna.

This is a sheet antenna for UHF band RFID reading. It is very thin and lightweight, with the thinnest part being only 1.8mm, making it possible to integrate into devices and other applications. *This document is intended for technical personnel. *Table of Contents - Introduction to Maspro Denkoh RFID products - Background and intention of sheet antenna development - Features of the sheet antenna (1) Antenna with a minimum thickness of 1.8mm (2) Antenna suitable for both far-field and near-field applications (3) Antenna capable of uniform reading - Rental management package using the sheet antenna - Case studies of sheet antenna implementation

• antenna
• IC tag
• Production Management System

The thinnest part is 1.8mm, making it possible to incorporate into devices! A thin and lightweight RFID reading sheet antenna.

This is a sheet antenna for UHF band RFID reading. It is very thin and lightweight, with the thinnest part measuring only 1.8mm. 【Features】 ■ Thin and lightweight - The thinnest part is only 1.8mm, making it a very thin sheet-type antenna that is unobtrusive when installed on shelves or tables. It can also be embedded in devices. ■ Uniform reading performance - It reads uniformly not only at the center of the antenna but also at the edges. - It is designed to achieve the same reading performance at both the center and the edges. ■ Contact reading capability - It is designed to read without being affected even when the RF tag is in close contact with the antenna. ■ Indoor use ■ Terminal (Connector) - SMA-P type ■ Performance - Frequency: 902–928MHz - Polarization: Circular polarization (right-handed) - Antenna gain: 3dBi or less (standard -5dBi) - Directivity (half-power angle): approximately 85° x approximately 85° - External dimensions: 190 (W) x 190 (D) x 1.8 (H) mm ■ Options - 1m extension coaxial cable (for indoor use, attenuation 1dB) - Conversion connector (for SPEEDWAY REVOLUTION connection) *For more details, please refer to the PDF document or feel free to contact us.

• Process Control System
• Other production management systems
• Entrance and exit control system

Let's get to know Maspro's RFID products in detail together with Proko! We also feature behind-the-scenes stories about the development of Maspro's sheet antennas.

Hello, this is Proko! Here, let's take a look at the product from a slightly different perspective than the usual product page. *Proko interviewed the development team about the UHF band RFID antenna "Sheet Antenna." The product features and development stories are written in an easy-to-read conversational format♩ *Featured Product UHF band RFID antenna "Sheet Antenna" ▼▽▼▽▼▽▼▽▼▽▼▽▼▽▼▽▼▽▼▽▼▽▼▽▼ Table of Contents *Casual Development Stories [1] Introduction to RFID Products [2] Image of Sheet Antenna in Use ▲△▲△▲△▲△▲△▲△▲△▲△▲△▲△▲△▲△▲ For more details, download the PDF document!

• IC tag
• Production Management System
• Process Control System

It is also possible to incorporate it into devices! A thin and lightweight RFID reading sheet antenna.

This is a sheet antenna for UHF band RFID reading. The reading area is wide, A4 size, and it is very thin and lightweight. This product is made to order. 【Features】 ■ Thin and lightweight - Being a very thin sheet-type antenna, it does not stand out when installed on shelves or tables. It can also be embedded in devices. ■ Uniform reading performance - It reads uniformly not only at the center of the antenna but also at the edges. - It is designed to achieve the same reading performance at both the center and the edges. ■ Contact reading capability - It is designed to read without being affected even when the RF tag is in close contact with the antenna. ■ Indoor use ■ Connector SMA-P type ■ Performance - Frequency: 902–928 MHz - Polarization: Circular polarization (right-handed) - Antenna gain: 3 dBi or less (standard +0.5 dBi) - Directivity (half-power angle): Approximately 55° × approximately 90° - Dimensions: 210 (W) × 295 (D) × 3 (H) mm *For more details, please refer to the PDF document or feel free to contact us.

• Process Control System
• Other production management systems
• Entrance and exit control system

Features: ● Equipped with Intel Core Ultra 5 125H/Ultra 7 155H・155U ● DDR5 5600MHz SO-DIMM x2 slots (up to 96GB) (sold separately) ● LVDS x1, eDP x1, DP x1, HDMI x1 ● LAN x3, SATA 6Gb/s x1, 8-bit GPIO ● USB 3.2 Gen2 x2, USB 2.0 x4 ● M.2 2280 M-Key x1 (PCIe 4.0 [x4]/SATA), M.2 3052 B-Key x1, M.2 2230 E-Key x1 ● DC 9~36V input * Heat spreader and fan-equipped heat sink sold separately GENE-MTH6-FAN: Fan-equipped heat sink GENE-MTH6-HSP: Heat spreader * Memory, storage, and OS are sold separately.

Features: ● Equipped with Intel Core i3-N305 / Processor N97 ● DDR5 4800MHz SO-DIMM x1 slot (up to 16GB) (sold separately) ● LVDS Dual Channel 18/24 bit x1, VGA x1, HDMI x1 ● Intel 2.5GbE x2, SATA 6Gb/s x1, 8bit GPIO ● USB 3.2 Gen2 x2, USB 2.0 x4 ● Full size mPCIe/mSATA ● M.2 3052 B-Key x1, M.2 2230 E-Key x1 ● DC 9~36V input * Heatsink included * Memory, storage, and OS sold separately

Features: ● Equipped with Intel Core Ultra 5 225H/7 255H (Arrow Lake) ● DDR5 6400MHz dual-channel SODIMM x 2 (up to 96GB) (sold separately) ● LVDS x 1, eDP x 1, HDMI x 1 ● LAN x 3, SATA 6Gb/s x 1, 8-bit GPIO ● USB 3.2 Gen2 x 2, USB 2.0 x 4 ● M.2 2280 M-key x 1, M.2 3052 B-key x 1, M.2 2230 E-key x 1 ● Supports DC input of 9 to 36V ● Fan-equipped heat sink available separately GENE-MTH6-FAN: Heat sink with fan GENE-MTH6-HSP: Heat spreader (requires heat dissipation in the enclosure) * This model does not include OS/memory/storage.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed without causing any thermal impact on the base material. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.