[Catalog Now Available] A variety of UHF band RFID antennas made by an antenna manufacturer are featured!

Standard-equipped with a reader-writer and antenna! A large indoor RFID reading gate antenna that can be passed through by forklifts.

This is a large UHF band RFID reading gate antenna that can be passed through by forklifts. It can instantly read multiple RF tags in bulk just by passing through. By attaching RF tags to each product, it allows for reading the contents without opening the cardboard boxes, eliminating the need to unpack and count each product individually. This product is made to order. 【Features】 ■ Large opening that can accommodate forklifts - The gate is very large, allowing forklifts to pass through even when loaded. ■ Suppression of radio wave leakage - To prevent reading RF tags outside the gate, the detection area is kept close to the gate, making misreads less likely. ■ Adjustable antenna height - The detection area can be configured according to the reading targets. ■ Equipped with a reader/writer ■ For indoor use *For more details, please refer to the PDF document or feel free to contact us.

• Process Control System
• Other production management systems
• Entrance and exit control system

Standard-equipped with a reader-writer and antenna! Indoor RFID reading gate antenna.

Equipped with antennas and readers as standard! The gate antenna for UHF band RFID reading, which is difficult to misread, has been updated. This new UHF band RFID reading gate antenna can accommodate cage trolleys and carts. Reading is as simple as passing through the gate. By attaching RF tags to each product, you can instantly grasp a large number of products without having to open cardboard boxes. This eliminates the need to unpack and count each product individually, thereby improving efficiency and reducing labor. Additionally, it is a highly accurate antenna that does not misread tags located outside the gate. *For more details about the new gate antenna, please refer to the PDF document or feel free to contact us.

• IC tag
• Production Management System
• Entrance and exit control system

Standard-equipped with a reader-writer and antenna! Indoor RFID reading gate antenna.

This is a gate antenna for UHF band RFID reading. By simply passing through, it can instantly read a large number of RF tags at once. By attaching RF tags to each product, it allows for reading the contents without opening the cardboard, eliminating the need to unpack and count each product individually. This product is made to order. 【Features】 ■ Large opening that allows carts to pass through - The large opening of the gate allows carts to pass through while being pushed. ■ Suppression of radio wave leakage - The detection area is contained within the gate to prevent reading RF tags outside the gate, making misreads less likely. ■ Adjustable gate opening - The gate opening can be adjusted according to the items being read. ■ Adjustable antenna height - The detection area can be configured according to the items being read. ■ Equipped with a reader/writer ■ For indoor use *For more details, please refer to the PDF document or feel free to contact us.

• Process Control System
• Other production management systems
• Entrance and exit control system

Achieves dustproof and waterproof performance IP65/IP67! Flat antenna for RFID reading suitable for outdoor use.

This is a flat antenna for reading UHF band RFID. Due to its high gain, it can instantly read a large number of RF tags over a wider area. The 'RAF2031' is a flat antenna for RFID reading that is designed for outdoor use, with dust and water resistance ratings of IP65/IP67 and a temperature range of -40 to +70°C. 【Features】 ■ High gain and directivity ■ Excellent weather resistance - The housing is made of weather-resistant resin, and the mast fixing hardware is made of stainless steel, making it resistant to aging. ■ Low axial ratio - RF tags can be read uniformly regardless of their orientation. 【Specifications (excerpt)】 ■ Frequency: 902–928MHz ■ Polarization: Circular polarization (right-handed) ■ Antenna gain: 9dBi or less (standard 8.5dBi) ■ Operating temperature range: -40 to +70°C ■ Waterproof and dustproof performance: IP65/IP67 ■ Dimensions: 285(W) x 29.85(D) x 285(H) mm ■ Weight: Approximately 1.4kg

• Process Control System
• Other production management systems
• Entrance and exit control system

The thinnest part is 1.8mm, making it possible to incorporate into devices! A thin and lightweight RFID reading sheet antenna.

This is a sheet antenna for UHF band RFID reading. It is very thin and lightweight, with the thinnest part measuring only 1.8mm. 【Features】 ■ Thin and lightweight - The thinnest part is only 1.8mm, making it a very thin sheet-type antenna that is unobtrusive when installed on shelves or tables. It can also be embedded in devices. ■ Uniform reading performance - It reads uniformly not only at the center of the antenna but also at the edges. - It is designed to achieve the same reading performance at both the center and the edges. ■ Contact reading capability - It is designed to read without being affected even when the RF tag is in close contact with the antenna. ■ Indoor use ■ Terminal (Connector) - SMA-P type ■ Performance - Frequency: 902–928MHz - Polarization: Circular polarization (right-handed) - Antenna gain: 3dBi or less (standard -5dBi) - Directivity (half-power angle): approximately 85° x approximately 85° - External dimensions: 190 (W) x 190 (D) x 1.8 (H) mm ■ Options - 1m extension coaxial cable (for indoor use, attenuation 1dB) - Conversion connector (for SPEEDWAY REVOLUTION connection) *For more details, please refer to the PDF document or feel free to contact us.

• Process Control System
• Other production management systems
• Entrance and exit control system

It is also possible to incorporate it into devices! A thin and lightweight RFID reading sheet antenna.

This is a sheet antenna for UHF band RFID reading. The reading area is wide, A4 size, and it is very thin and lightweight. This product is made to order. 【Features】 ■ Thin and lightweight - Being a very thin sheet-type antenna, it does not stand out when installed on shelves or tables. It can also be embedded in devices. ■ Uniform reading performance - It reads uniformly not only at the center of the antenna but also at the edges. - It is designed to achieve the same reading performance at both the center and the edges. ■ Contact reading capability - It is designed to read without being affected even when the RF tag is in close contact with the antenna. ■ Indoor use ■ Connector SMA-P type ■ Performance - Frequency: 902–928 MHz - Polarization: Circular polarization (right-handed) - Antenna gain: 3 dBi or less (standard +0.5 dBi) - Directivity (half-power angle): Approximately 55° × approximately 90° - Dimensions: 210 (W) × 295 (D) × 3 (H) mm *For more details, please refer to the PDF document or feel free to contact us.

• Process Control System
• Other production management systems
• Entrance and exit control system

Achieving extremely narrow directivity! RFID reading antenna that suppresses the spread of radio waves.

This is a narrow directional antenna for UHF band RFID reading. By narrowing the reading range of the antenna, it is designed not to recognize tags that you do not want to read, even in environments such as warehouses where reflected waves are likely to occur. 【Features】 ■ Achieves narrow directivity Thanks to Maspro Denkoh's unique technology, extremely narrow directivity has been achieved. It suppresses the spread of radio waves, making it useful when you want to limit the reading area of RF tags. ■ Connector - SMA-J type ■ Performance - Frequency: 902–928 MHz - Polarization: Circular polarization (right-handed) - Antenna gain: 8.5 dBi or less - Directivity (half-power angle): Approximately 22° × approximately 67° - Dimensions: 780(W) × 220(D) × 37(H) mm - Weight: Approximately 2.6 kg *For more details, please refer to the PDF document or feel free to contact us.

• Process Control System
• Other production management systems
• Entrance and exit control system

Just by passing through, it can be read! A mat antenna that can instantly read multiple tags at once.

This is a mat antenna for UHF band RFID reading. By simply passing through, it can instantly read a large number of RF tags at once. By attaching RF tags to each product, it allows for reading the contents without opening the cardboard, eliminating the need to unpack and count each product individually. 【Features】 ■ Automatic recognition possible by just passing through - With a reading range of about 1 meter from the bottom, RF tags can be read just by passing through without conscious effort. ■ Uniform reading capability - Designed to achieve the same reading performance at the center and edges of the antenna. ■ Usable when laid on the floor - To ensure there is no step between the mat and the floor, the passing direction is designed with a slope structure. ■ Terminal (Connector) - SMA-P type ■ Performance - Frequency: 902–928 MHz - Polarization: Circular polarization (right-handed) - Antenna gain: 11.5 dBi or less - Directivity (half-power angle): Approximately 23° × approximately 72° - External dimensions: 880(W) × 350(D) × 15(H) mm - Weight: Approximately 4.2 kg *For more details, please refer to the PDF document or feel free to contact us.

• Process Control System
• Other production management systems
• Entrance and exit control system

Can fit into narrow gaps! Portable and usable! Lightweight! Indoor RFID reading racket antenna.

This is a racket antenna for RFID reading. It can be held in hand, making it easier to read RF tags located in hard-to-reach areas. The tip is designed to be thin and racket-shaped, allowing it to be inserted into narrow gaps for use. This product is made to order. ■Connector - SMA-J type ■Specifications - Frequency: 916.8–920 MHz - Polarization: Circular polarization (right-handed) - Antenna gain: 6 dBi or less - Directivity (half-power angle): Approximately 85° × approximately 85° - Dimensions: 180(W) × 400(D) × 30(H) mm - Weight: Approximately 360 g ■Included Accessories - Included coaxial cable: 2 m (BNC-SMAP coaxial cable) *For more details, please refer to the PDF document or feel free to contact us.

• Process Control System
• Other production management systems
• Entrance and exit control system

Compact RFID reading antenna that can be installed in narrow spaces.

This is a compact antenna for UHF band RFID reading. Due to its small size, it can be easily integrated into production lines and similar environments. It can read RF tags attached to products, allowing for identification of each product in conjunction with a PLC (programmable logic controller) to control conveyors and other applications. It is ideal for situations where the orientation of the RF tag is not fixed, thanks to its circularly polarized design. This product is made to order. 【Features】 ■ Compact The small antenna can be installed in tight spaces. Additionally, it has screw holes for secure mounting in the desired location. ■ Terminal (Connector) - SMA-J type ■ Performance - Frequency: 916.8 to 922.2 MHz - Polarization: Circular polarization (right-handed) - Antenna gain: 3 dBi or less (standard -5 dBi) - Directivity (half-power angle): Approximately 105° × approximately 115° - Dimensions: 79(W) × 100(D) × 22.5(H) mm - Weight: Approximately 130 g

• IC tag
• Process Control System
• Other production management systems

A compact RFID reading antenna that can be installed in limited spaces. It has screw holes, allowing for secure mounting in the desired location!

This is a compact antenna for UHF band RFID reading. Being a small antenna, it is easy to integrate into production lines and similar environments. It can read RF tags attached to products, allowing for identification of each product in conjunction with a PLC (sequencer) to control conveyors, among other uses. It is ideal for situations where the position of RF tags is fixed, such as in logistics, due to its linear polarized design. This product is made to order. 【Features】 ■ Compact The small size of the antenna allows for installation in tight spaces. Additionally, it has screw holes for secure mounting in the desired location. ■ Terminal (Connector) - SMA-P type ■ Performance - Frequency: 916.8 to 922.2 MHz - Polarization: Linear polarization (vertical) - Antenna gain: 3 dBi or less - Directivity (half-power angle): Approximately 90° × approximately 145° - Dimensions: 70(W) × 170(D) × 10(H) mm - Weight: Approximately 140 g

• Process Control System
• Other production management systems
• Entrance and exit control system

Happy New Year. Thank you very much for your exceptional support over the past year. This year, we will continue to strive to provide prompt and high-quality services, and all of our employees will work hard towards this goal. We kindly ask for your continued support and patronage. We look forward to your continued cooperation this year as well.

We would like to inform you that the company name has been changed as of January 1, 2026. New company name: KELLER Pressure Co., Ltd. (Former company name: KELLER Pressure Japan Co., Ltd.) There are no changes to the phone numbers or inquiry email. Phone numbers: 03-5944-9199, 03-5944-9198 Inquiry email: sales.jp@keller-pressure.com We appreciate your continued support.

Happy New Year! Thank you very much for your exceptional support over the past year. Yoshikawa Co., Ltd.'s Realization Division will continue to contribute to solving your challenges this year as a "Realization House" that transforms your thoughts of "I want to do this" and "Is it possible to do something like this?" into reality, utilizing our skilled stainless steel processing technology. We are pleased to announce that we will be exhibiting for the first time at "The 40th NEPCON Japan," which will be held at Tokyo Big Sight from **January 21 (Wednesday) to 23 (Friday), 2026**, to introduce our technologies and products in greater depth. At our booth, we will showcase a variety of slide-type metal mask dedicated shelves that contribute to improving productivity in the electronics field. These not only lead to efficient management and improved workability in limited spaces but can also be customized according to your needs. We invite you to visit our booth at Tokyo Big Sight during this opportunity. We welcome inquiries such as "Can this processing be done?" and look forward to seeing you there.

Happy New Year. We look forward to your continued support this year as well. Last year, there were notable winter natural disasters such as earthquakes in Hokkaido, Tohoku, and the northern Kanto region. We sincerely express our condolences to those affected and pray for the safety of those working on recovery efforts, as well as for the new year to be bright and peaceful. In 2026, we will work together as a company to create a "more user-friendly website that can be viewed every day," and we will strive for challenges and improvements in "energy-saving and environmentally friendly equipment and maintenance." We appreciate your continued support this year as well. Toyota Kikan Co., Ltd.

Insulating oil from old electrical equipment that has been in use for over 30 years may be contaminated with PCBs. Proper disposal is required by the disposal deadline. If you are using a vacuum tube oscillator, please check! - Transformers - Capacitors - Rectifiers, etc. If you have oscillators or hardening equipment, please consider updating them as soon as possible. *For more details, please refer to the PDF document or feel free to contact us. ★ For inquiries by phone, please call: Osaka Headquarters → TEL: 072-991-1361 Nagoya → TEL: 052-322-1361 Tokyo → TEL: 03-5472-1361 ★ For inquiries by email, please contact: info@fujidenshi.co.jp *When calling or emailing, please mention "Ipros" as your reference. Business hours: Monday to Friday, 9 AM to 5 PM.