Water Jet Glossary

We can provide the best products, services, and expertise for our customers.

Flow is a leading company in the development and manufacturing of ultra-high-pressure water jets and a top provider of robotics and assembly equipment. We offer environmentally friendly solutions through advanced technology to the manufacturing and industrial cleaning markets. In the early 1970s, the predecessor in charge of research and development became independent from Boeing and founded Flow Research. This marked the beginning of Flow. The ultra-high-pressure water jet, used as industrial cutting equipment, was our first product. Later, Flow invested in and patented the technology, successfully developing the world's first abrasive water jet capable of cutting hard materials up to 30.5 cm (12 in.) thick. For more details, please contact us or refer to our catalog.

• Other pumps
• Plastic processing machines (cutting and rolling)
• Other surface treatment equipment

Significantly reduce processing time for complex shapes with high acceleration! Ultra-high pressure of the highest class at 600 MPa. A free booklet on acceleration is currently available!

When processing complex shapes with a water jet cutting machine, the entire processing procedure constantly repeats "acceleration ⇔ deceleration." In other words, it does not mean that cutting is always done at "maximum speed." ⇒ To shorten the cutting time of parts, it is necessary to focus on "acceleration"! Flow Japan's water jet cutting machine, the 'Mach 500/700 series,' can achieve an acceleration of 0.1 times, which is more than double that of other water jet systems, significantly reducing the time required for processing complex shapes. Furthermore, combined with a top-class ultra-powerful pump with a maximum operating pressure of 600 MPa, it enables high-speed and high-precision processing. It can easily cut materials over 100 mm thick and allows for adjustments to the cutting head and water flow to suit various materials, from soft to hard. ★ A pamphlet explaining the "Importance of Acceleration in Water Jet Cutting" is available for viewing via the "PDF Download" link below. ★ We have launched a YouTube channel! Please check it out through the link below!

• Other machine tools

Mach 700 is an excellent large waterjet cutting solution for demanding heavy industrial environments.

Equipped with ideal size, speed, and precision, we meet the stringent demands and expectations of heavy industry.

• Other machine tools

A completely sealed all-in-one solution that achieves precise, clean, and quiet cutting!

The "NanoJet" is a high-precision, compact water jet machining center. It easily achieves high-output operations that deliver special parts with minimal floor space. For example, it excels in fine processing of small and fragile items, such as electronic devices (materials like glass and ceramics) and highly integrated semiconductor devices. It is also well-suited for cutting advanced machine materials that require precision and complex geometries, as well as for production environments that operate 24/7, providing maximum uptime and reliability. 【Features】 ■ Excels in fine processing of small and fragile items ■ Can be used in a space-saving environment compared to conventional machines ■ Completely sealed system suitable for the inherent cutting environment of water jets ■ Rapid comprehensive parts processing ■ Designed to meet application requirements *For more details, please refer to the PDF document or feel free to contact us.

• Other machine tools
• Other processing machines

A water jet cutting machine that achieves ultra-high pressure of 600 MPa! It can cut materials over 100 mm thick and is capable of handling difficult materials such as CFRP and titanium!

In metal material cutting, there are methods such as laser and plasma, but issues like "the occurrence of distortion due to heat" and "difficulty in processing hard-to-cut materials like CFRP" are common concerns. Additionally, wire electrical discharge machining is suitable for thick materials, but the issue of processing time is a concern. Flow Japan's water jet cutting machine, the 'Mach 500 Series,' is equipped with an industry-leading ultra-powerful pump that operates at a pressure of 600 MPa, achieving high-speed and high-precision processing. It can cut materials over 100 mm thick and allows for adjustments to the cutting head and water flow according to the material, from soft to hard (reducing processing time by up to 1/10). With water jet cutting, hard-to-cut materials like CFRP, titanium, and Inconel can be easily cut! ★ For a limited time, we are offering a handbook filled with comparison data between water jet cutting and other methods for free! ★ → For more details, please download the PDF data from the link below.

• Other machine tools

A water jet cutting machine that achieves ultra-high pressure of 600 MPa! Capable of cutting materials over 100 mm thick! Can process CFRP with high precision in a short time!

The advanced material "carbon fiber reinforced plastic: CFRP," which balances high strength and lightness, is widely used in the aerospace and automotive industries, but it is characterized by its difficulty in processing. Did you know that water jet cutting is often chosen for its trimming processing? With router processing, distortion due to heat occurs, leading to secondary processing, but water jet cutting eliminates this concern and allows for high-precision processing in a short time. When processing 10 meters of 25mm thick CFRP, it can be done in less than one-third of the time required by a router. 【Introducing our flagship model】 The Flow Japan water jet cutting machine 'Mach 500 Series' is equipped with an ultra-powerful pump with the industry's highest class operating pressure of 600 MPa, achieving high-speed and high-precision processing. It can cut materials over 100mm thick and allows for adjustments to the cutting head and water flow according to the material, from soft to hard (reducing processing time by up to 1/10). ★ We are currently offering a free technical document titled "Why Water Jet Cutting is Chosen for CFRP Processing?" ★ *Please download the PDF data from the link below to view it.

• Other machine tools

We would like to introduce 'Slim 4' handled by FCR & Bio Co., Ltd. This product is a jacket tube with a rack lid lock and anti-rotation function (compatible capacity 4.1ml). It is autoclavable and suitable for DMSO and vapor phase of liquid nitrogen. Additionally, it features a screw cap that does not use O-rings, packing, or gaskets. 【Features】 ■ Polypropylene ■ Autoclavable ■ DMSO compatible ■ Suitable for vapor phase of liquid nitrogen *For more details, please download the PDF or feel free to contact us.

We will hold a thick plate solution event. We will propose a highly efficient automated operation for the entire factory, including cutting with the newly unveiled fiber laser machine, automatic transportation, and bending processing. This event will allow you to experience the latest machines and processing, so we encourage you to attend. 【Event Schedule】 November 21 (Friday) and 22 (Saturday), 2025, from 13:00 to 14:00 *Please note that the capacity for November 21 (Friday) is nearing full, so we recommend attending on November 22 (Saturday). If we reach capacity, we may have to decline participation. Please apply early. 【Event Location】 Amada Global Innovation Center (200 Ishida, Isehara City, Kanagawa Prefecture) 【Event Content】 Part 1: Product Introduction Seminar Part 2: Live Demonstration

Cataracts are a common condition that significantly impacts daily life, causing many people to struggle. However, cataract surgery can restore or greatly improve patients' vision. KNF vacuum pumps are an essential component of the medical devices used for such precise surgeries. KNF offers a diverse lineup of diaphragm pumps for cataract surgery. For debris removal, the N 813 is a strong option. It achieves a maximum vacuum of 0.5 mbar (absolute), a maximum flow rate of 13 l/min, and a maximum pressure of 0.3 bar (relative). The N 813 provides stable, reliable performance with a compact design. It can be equipped with a customizable state-of-the-art BLDC motor that enables precise flow control. Its configuration and motor allow for low-speed operation, ensuring the necessary flow rate and vacuum for cataract surgery while reducing noise and vibration.

This is a 2K line scan camera equipped with Gpixel's GL3504. It features a 7×7μm CMOS with a horizontal resolution of 2048 pixels. The monochrome model supports single and dual line modes, while the color model supports 3-line true color output. The maximum line rate is 172.7 kHz for the monochrome model and 44.7 kHz for the color model, making it ideal for industrial inspection as well as logistics and print inspection. It comes in a compact C-mount housing with a 50mm square design and is equipped with mounting taps on the front and four sides, ensuring easy installation regardless of position or conditions.

New sizes of the BGX cup are now available! In addition to the existing sizes of 34mm, 41mm, and 48mm, new sizes of 27mm and 63mm have been added to the lineup, providing even more options. You can customize your automation processes more flexibly. The BGX cup, ideal for picking thin and fragile bags, offers a strong grip even at low vacuum levels. Made of blue silicone, it complies with FDA and EU standards, ensuring safe direct contact with food. Additionally, it features excellent flexibility to accommodate a wide range of temperature environments. ✅ Excellent sealing performance ✅ High stability due to integrated design ✅ Multi-bellow structure ✅ Food-grade silicone ✅ Wide temperature compatibility ✅ Rich customization options For more details, visit https://www.piab.com/ja-jp/news/bgx27mm63mm