Notice of publication in the Nikkan Kogyo Shimbun on July 14, 2020.

For the recovery of waste liquid from 5 meters below the underground pit.

《APPQO Series》 APPQO-H (for oil / liquid only) APPQO-HG (for kerosene / diesel / liquid only) APPQO-HAS (for solvents / liquid only) ◎ Compatible with high-viscosity liquids due to vacuum pressure type ◎ Simple structure with no failures ◎ Easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a stainless steel can ● Continuous operation possible ● Less prone to breakage compared to electric types ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Liquid only (general oils, etc.) ● Recommended for stainless steel cans (APPQO-SK) ● Automatic stop when liquid is full ● Usable with air compressors of 5 horsepower (3.75 kW) or more

• others

Hand-cranked pump that performs exceptionally well even in emergencies. For transferring low-viscosity liquids and gasoline.

"HR Series" HR-25G (For Oil and Gasoline) ◎ Hand-cranked pump that requires no power source ◎ Usable without sealing the drum ◎ Widely usable from household drums to factories ◎ Suction pipe can be cut 《Benefits》 ● Easy operation by simply turning the handle ● No power supply needed ● Can be used with A heavy oil and low viscosity oil (below 500 cP) ● Allows for small portioning of gasoline ● Greatly useful in emergencies and disasters 《Features》 ● Continuous pumping is possible ● Securely fixed to the drum with an adapter ● Comes with 40 mesh ● Equipped with a magnet ground wire for static electricity prevention

• others

Quickly transfer low-viscosity liquids.

"MH Series" MH21N-V (for solvents) MH316M-V (for solvents) ◎ Electric 100V ◎ Two types: plastic and stainless steel "Benefits" ● Usable anywhere with a 100V power supply ● Transfers approximately 20L in about 1 minute ● Capable of transferring to high places ● Usable with plastic cans and one-gallon cans "Features" ● With ball valve ● Two types: stainless steel and plastic

• Other pumps

Collect low-viscosity liquid into a closed pail.

《APPQ Series》*For Closed Pail Cans Only APPQ (For Oil / Liquid Only) APPQG (For Kerosene / Light Oil / Liquid Only) APPQAS (For Solvents / Liquid Only) ◎ Simple structure with no failures ◎ Easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available closed pail can ● Continuous operation possible ● Less prone to breakage compared to electric models ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● For liquids only (general oils, etc.) ● For JIS standard 20L closed pail cans only ● Usable with air compressors of 1 horsepower (0.75kw) or more ● Outer diameter dimension of the can opening (for 41mm)

• Other pumps

Collect low-viscosity liquid into an open pail.

《APPQO Series》 APPQO (for oil / liquid only) APPQOG (for kerosene and light oil / liquid only) APPQOAS (for solvents / liquid only) ◎ Simple structure with no failures ◎ Easy operation ◎ Convenient options 《Benefits》 ● Can be used simply by placing it on a commercially available pail ● Can suction one pail in about 15 seconds ● Continuous operation possible ● Less likely to break compared to electric models ● Air-driven, safe for use in explosion-proof areas, no risk of ignition 《Features》 ● Liquid only (general oils, etc.) ● JIS standard 20L open pail (recommended outer diameter 300mm±1, plate thickness 0.4mm or more) ● Automatic stop when liquid is full ● Usable with air compressors of 1 horsepower (0.75kw) or more

• Other pumps

A portable electric handheld pump. It is ideal for transferring relatively high-viscosity oil and for use at high elevations.

"EV Series" EV-100 (for oil / 100V / pump only) EV-200 (for oil / 200V / pump only) EV-12 (for oil / 12V / pump only) EV-100H (for oil / 100V / pump only) EVD-100 (for oil / 100V / for drum) EVD-200 (for oil / 200V / for drum) EVD-12 (for oil / 12V / for drum) EVD-100H (for oil / 100V / for drum) EVH-100 (for oil / 100V / both ends of hose) EVH-200 (for oil / 200V / both ends of hose) EVH-12 (for oil / 12V / both ends of hose) EVH-100H (for oil / 100V / both ends of hose) *Not suitable for kerosene, light oil, solvents, etc. "Benefits" ● Can handle general oil VG400 and gear oil SAE140 at 15℃ ● Lever coupling type allows for one-touch attachment and detachment ● Options for flow meters and manual nozzles available, suitable for various applications ● If you want to discharge a large amount of oil below 1,000 cP, the EV-100H is optimal.

• Other pumps

Portable electric hand pump. High-speed transfer of kerosene and diesel.

"EVP Series" EVPD56-100 (for kerosene and light oil / for drum cans) EVPD-56ATN (for kerosene and light oil / for drum cans / with auto-stop gun) EVPD-56K24 (for kerosene and light oil / for drum cans / with flow meter) EVPD-56K24ATN (for kerosene and light oil / for drum cans / with auto-stop gun and flow meter) ◎ Flow meter and auto-stop gun specifications ◎ Customizable Benefits: ● Maximum discharge rate of 46L per minute ● Various applications available with flow meter and auto-stop gun options ● Continuous operation possible Features: ● Designed specifically for JIS standard 200L closed drum cans (large plug G2) ● Single-phase AC 100V (200V version also available) ● Built-in relief valve and 100μm filter ● Available in hose connection type for drum cans ● Spiral centrifugal pump

• Other pumps

For the transfer of low-viscosity oils such as kerosene, light oil, and biodiesel.

**EMH Series** EMH-20FC (For oil, kerosene, light diesel, biodiesel / Pump only) EMH-20SUS (For oil, kerosene, light diesel, biodiesel, solvents / Pump only) EMHH-20FC (For oil, kerosene, light diesel / Both ends with hose) EMHD-20FC (For oil, kerosene, light diesel / For drums) EMHD-20SUS (For oil, kerosene, light diesel, biodiesel, solvents / For drums) **Benefits** ● Continuous operation possible ● Can transfer kerosene and light diesel without selecting containers ● Ideal for transferring biodiesel oil ● Low vibration and low noise **Features** ● Dedicated to JIS standard 200L closed drums (large cap G2) ● Equipped with relief valve (0.1MPa), vane pump ● Various customizations available for drum use and hose connections. *Note: SUS type cannot be used with water or solvents.*

• Other pumps

As emergency supplies for apartments and municipalities. For replenishing drinking water during disaster emergencies.

**EDO Series** - EDO-40 (for oil, kerosene, diesel, and water / screw connection type) - EDO-50 (for oil, kerosene, diesel, and water / screw connection type) - EDO-50H (for oil, kerosene, diesel, and water / screw connection type) ◎ For emergency water supply pump ◎ Easy operation ◎ Standing action type **Benefits** ● Maximum discharge rate of 100L/min ● Powerful liquid transfer with 5m suction, 5m/7m/12m discharge ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil ● Work can be done while standing **Features** ● Manual, 100V power supply ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble

• Other pumps

Safe and optimal pressure-resistant explosion-proof motor for the transfer of flammable liquids such as organic solvents and chemical agents.

**SHC-100** SHC-100 (For Solvents and Biodiesel) A safe and secure drum pump certified under the Ministry of Labor's electrical machinery and equipment explosion-proof structure standards (d2G3). It features an explosion-proof pressure-resistant structure as specified by the Ministry of Labor's electrical machinery and equipment explosion-proof structure standards (d2G3). **Benefits** ● Discharges a full drum in just 3.5 minutes and can operate continuously for 24 hours. ● Compatible with various solvents and chemicals. ● Comes with a manual gun nozzle for easy one-handed dispensing. **Features** ● Designed specifically for JIS standard 200L closed drums. ● Equipped with a pressure-resistant explosion-proof structure motor for safety. **Explosion-Proof Motor** When installing a gear motor in areas with flammable gases or explosive atmospheres, the motor must comply with the safety and health laws and pass explosion-proof certification. This certification system is conducted by designated testing organizations (Japan Industrial Safety and Health Association) appointed by the Minister of Health, Labour and Welfare, which tests electrical equipment by type. Explosion-proof motors must be selected based on the type of explosive atmosphere and the level of risk involved.

• Other pumps

Just turn on the switch for easy use! A pump perfect for transferring kerosene and light oil!

"FA Series" FA-100ATN (for kerosene and light oil / with auto-stop gun) FA-100K24 (for kerosene and light oil / with flow meter) FA-100ATNK24 (for kerosene and light oil / with auto-stop gun and flow meter) "Benefits" ● Koshin FA-100 ● Available with flow meter and auto-stop gun, suitable for various applications "Features" ● Dedicated for JIS standard 200L closed drums (large cap G2) ● 30-minute rated ● Convenient drum pump for home use with AC-100V power supply ● Equipped with relief valve

• Other pumps

Ministry of Labor explosion-proof structure standard certification! A pump that can safely transport petroleum products using a pressure-resistant explosion-proof motor.

**SFC** SFC (Gasoline, Kerosene, Diesel) A safe and secure drum pump certified under the Ministry of Labor's electrical machinery and equipment explosion-proof structure standards (d2G3). **SFC Series (Explosion-Proof Motor)** When installing a gear motor in locations with flammable gases or explosive atmospheres, the motor must be one that has passed explosion-proof certification as stipulated by the Safety and Health Act. This certification system is conducted by a designated testing organization (the Japan Industrial Safety and Health Association) for each type of electrical equipment within Japan. Explosion-proof motors must have the optimal explosion-proof structure selected according to the type of explosive atmosphere and the degree of hazard. - It features an explosion-proof pressure-resistant structure classified under the explosion-proof grade defined by the Ministry of Labor's electrical machinery and equipment explosion-proof structure standards (d2G3). - It can discharge one drum in just 3.5 minutes and can operate continuously for 24 hours. - Suitable for use with kerosene, diesel, and gasoline. - Designed for use in explosion-proof storage (areas). **Benefits** - Can be used with gasoline - Comes with a manual gun nozzle for easy one-handed dispensing **Features** - Designed for JIS standard 200L closed drums - Equipped with a pressure-resistant explosion-proof structure motor for safety

• Other pumps

Pulsation-free discharge during carrier movement. Due to high pressure, injection and spraying are also possible.

《APP-C Series》 APP-C-AL (for oil) APP-C-SUS (for solvents) ◎ Compatible with different diameter cans, including pails and drums ◎ Suitable for high-viscosity liquids ◎ Efficient liquid discharge without waste 《Benefits》 ● For high-viscosity liquids (below 5,000 cP) ● Minimal residual liquid, no pulsation ● Can transfer to high places or long distances under high pressure 《Features》 ● Sealed pressurized, discharge-only system ● Entire pail or drum is pressurized ● Continuous operation possible ● Lifting capacity of 30m ● Usable with air compressors of 1 horsepower (0.75 kW) or more

• Other pumps

A convenient system that combines a pump and a flow meter. The long-awaited flow meter integrated drum pump.

"CUBE Series" CUBE-56T (for kerosene and light oil / tabletop) CUBE-56K (for kerosene and light oil / wall-mounted) CUBE-56S (for kerosene and light oil / stand) ◎ Measured refueling for kerosene and light oil ◎ Pump and flow meter in one box 《Benefits》 ● The amount taken out is visible at a glance ● Usage can be managed ● No worries about overflow with automatic stop when the container is full ● Continuous operation is possible 《Features》 ● Choose from three types: tabletop (T), wall-mounted (K), and stand (S) ● Power supply 100V ● Flow meter and auto-stop gun are standard equipment ● The pump's power automatically turns off when the gun nozzle is stored

• Other pumps

AdBlue for purifying diesel exhaust gases. When you want to quickly portion out AdBlue from a resin drum.

"Ad Series" Ad-1 (for AdBlue / Electric) Ad-1Air (for AdBlue / Air) Ad-1L (for AdBlue / Lithium Battery) ◎ PSE (Electrical Appliance and Material Safety Law) compliant product ◎ Acquired AdBlue license in 2011 Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction machinery and agricultural machinery, and as needs change, we are currently developing and importing AdBlue products suitable for Japan in response to customer feedback. "Benefits" ● Lightweight and compact ● Auto-stop gun and flow meter can also be installed "Features" ● Dedicated to JIS standard 200L closed drums (large plug G2) * Optional specifications available for Kodama resin and Sanko adapters.

• Other pumps

AdBlue for purifying diesel exhaust gases When you want to quickly portion out AdBlue from a resin drum.

"Ad Series" Ad-2 (for AdBlue / Electric) Ad-2Air (for AdBlue / Air-operated) Ad-2L (for AdBlue / Lithium battery-operated) ◎ PSE (Electrical Appliance and Material Safety Law) compliant product ◎ Acquired AdBlue license in 2011 Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction machinery and agricultural machinery, and needs change, we are currently developing and importing AdBlue products suitable for Japan to respond to customer feedback. "Benefits" ● Lightweight and compact ● Auto-stop gun and flow meter can also be installed "Features" ● For IBC containers

• Other pumps

Convenient for supplying AdBlue in small quantities to cargo vehicles, construction machinery, agricultural machinery, and large vehicles.

"AdBOX Series" AdBOX (for AdBlue) ◎ PSE (Electrical Appliance and Material Safety Law) compliant product ◎ Acquired AdBlue license in 2011 Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction and agricultural machinery, and needs change, we are currently developing and importing AdBlue products suitable for Japan to respond to customer feedback. "Benefits" ● Easy to carry with a carry-style design ● Can be powered by heavy machinery or vehicle batteries ● Compact yet delivers a flow rate of 25L per minute ● Ideal for refueling large vehicles such as trucks, construction machinery, and agricultural machinery "Features" ● AdBlue pump set that fits in one box ● DC-24V

• Other pumps

Quickly transfer low-viscosity liquids.

"MH Series" MH21N-V (for solvents) MH316M-V (for solvents) ◎ Air-driven ◎ Two types: resin and stainless steel "Benefits" ● Safely transfers highly flammable liquids ● Transfers approximately 20L in about 1 minute ● Capable of transferring to high places ● Usable with poly cans and one-gallon cans "Features" ● Equipped with a ball valve ● Two types: stainless steel and resin *Please be sure to use an air filter and lubricator.

• Other pumps

Water absorption of 6m (2.5m when dry) with a performance of 15m in height. Made of aluminum, lightweight, and equipped with a manual water supply pump.

"HWA Pump Series" - HWA-0 (Brass for key parts / for water) - HWA-2 (Brass for key parts / for water) ◎ For emergency water supply pump ◎ Liquid transfer ◎ Lightweight and compact 《Advantages》 ● Performance of 6m suction (2.5m when dry) and 15m discharge ● Trusted and proven performance used in ships for many years ● Usable in locations without power supply 《Features》 ● Lightweight water wing pump ● Flange is screw type ● Body is made of aluminum casting

• Other pumps

Water absorption of 6m (2.5m when dry) and a lift height of 15m. Usable in locations without power supply.

"Yatsunami Wing Pump Series" - FC-CAC 15A to 50A (Brass for key parts / for oil) - FC-CAC JIS5K 15A to 50A (Brass for key parts / for oil) - FC-CAC JIS10K 15A to 50A (Brass for key parts / for oil) ◎ For emergency water supply pumps ◎ Liquid transfer "Benefits" ● Performance of 6m suction (2.5m when dry) and 15m discharge ● Trusted and proven performance used in ships for many years ● Usable in locations without power supply "Features" ● Two types: screw-type flange and JIS standard round flange * No phase flange for JIS 5K type and JIS 10K type ● Separate brass for water and gasoline specifications available

• Other pumps

Water absorption of 6m (2.5m when dry) and a lift height of 15m. Usable in locations without power supply.

"Yatsunami Wing Pump Series" - CAC-CAC 15A to 50A (All brass / for water) - CAC-CAC JIS5K 15A to 50A (All brass / for water) - CAC-CAC JIS10K 15A to 50A (All brass / for water) ◎ For emergency water supply pumps ◎ Liquid transfer "Benefits" ● Suction performance of 6m (2.5m when dry) and discharge of 15m ● Trusted and proven performance used in ships for many years ● Usable in locations without power supply "Features" ● Two types available: with screw-type flange and JIS standard round flange * No flange for JIS 5K type and JIS 10K type ● Additionally available in brass (for oil) and gasoline specifications

• Other pumps

Suction depth of 6m (2.5m when dry) and a lift height of 15m. Usable in locations without power supply.

"King Wing Pump Series" - FC-CAC 15A to 50A (Brass for essential parts / for oil) ◎ For emergency water supply pumps ◎ Liquid transfer 《Benefits》 ● Performance of 6m suction (2.5m when dry) and 15m discharge ● Trusted and proven performance used in ships for many years ● Usable in locations without power supply 《Features》 ● Screw-type phase flange included ● Essential parts made of brass only

• Other pumps

For transporting fuel and water in places without power or during emergencies. Despite being a manual pump, it has excellent suction capability.

"HDO Series" - HDO-20ALA (for oil, kerosene, diesel, and water / hose nipple specification) - HDO-20(25)ALB (for oil, kerosene, diesel, and water / screw connection specification) - HDO-20ALOZ (for oil, kerosene, diesel, and water / coupler connection specification) - HDO-32(40)ALB (for oil, kerosene, diesel, and water / screw connection specification) - [Discontinued] HDO-20(30P) (for water and seawater / hose nipple specification) - ST-HDOS-32(40)ALB (for oil, kerosene, diesel, and water / screw connection specification) - KT-HDOS-32(40)ALB (for oil, kerosene, diesel, and water / screw connection specification) - HDO-50 (for oil, kerosene, diesel, and water / screw connection specification) ◎ For emergency water supply pump ◎ Easy operation "Benefits" ● Performance of 8m suction (no priming needed) and 8m discharge (HDO-32/40ALB has 5m suction and 7m discharge, HDO-50AL has 4m suction and 7m discharge) ● Usable in locations without power supply ● Can handle high-viscosity liquids and waste oil "Features" ● Made of aluminum ● Handle can be replaced every 90° ● Easy to disassemble and assemble

• Other pumps

Easily portion high-viscosity liquids from pails or one-gallon cans.

"P-S Series" P-S (for oil) P-SX (for solvents) P-SXT (for solvents) ◎ Manual pump that does not require a power source ◎ Compatible with high-viscosity liquids "Benefits" ● No power supply needed ● For high-viscosity liquids (up to 10,000 cP) ● Can dispense oils that become hard in winter ● SUS models are compatible with various solvents (P-SX, P-SXT) ● Very useful in emergencies and disasters "Features" ● For 41mm outer diameter of pails and one-gallon cans (40mm adapter included as standard) *Optional 50mm adapter also available ● Continuous pumping is possible ● Operates with an up-and-down piston mechanism that dispenses when pulled up *For high-viscosity liquids, please pull the handle up slowly.

• Other pumps

A chemical pump that pursues reasonable pricing. For the transfer of dilute sulfuric acid and alkaline solvents in fire-restricted areas.

Chemical Pump 《CHD Series》 CHD-20APP (for solvents) CHD-20APPV (for solvents / with ball valve) CHD-20APPN (for solvents / with gun nozzle) CHD-20AHP (for solvents) CHD-20AHPV (for solvents / with ball valve) CHD-20AHPN (for solvents / with gun nozzle) 《Benefits》 ● Continuous operation possible ● Lightweight and compact body ● Inexpensive ● Safe division of flammable liquids ● Motor part can be replaced 《Features》 ● Dedicated to JIS standard 200L closed drums (large cap G2) ● For low viscosity solvents (below 100cP) ● No risk of electric leakage due to air operation ● Air motor type with high discharge volume, non-pulsating ● Discharge only PSE (Electrical Appliance and Material Safety Law) compliant product PSE (Product Safety Law) compliant product, ensuring safety and security

• Other pumps

For dispensing AdBlue in locations without power, for refilling from a back-in-box.

"Ad-3 Series" Ad-3 (for AdBlue / battery-operated) Ad-3-100 (for AdBlue / electric) ◎ PSE (Electrical Appliance and Material Safety Law) compliant product ◎ Acquired AdBlue license in 2011 Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction and agricultural machinery, and needs change, we are currently developing and importing AdBlue products suitable for Japan in response to customer feedback. "Benefits" ● Lightweight and compact ● Can be refilled in places without power or air ● No need to lift the box ● Can dispense approximately 26 boxes with 2 AA batteries "Features" ● For back-in-box use * Back-in-box sold separately ● Two types: battery-operated and 100V ● Comes with a 2.5m hose (hose extension is not possible) ● Includes a hand nozzle * Auto-stop function is not included.

• Other pumps

A convenient system that combines a pump and a flow meter. The long-awaited flow meter integrated drum pump.

"CUBE Series" CUBE-70K (for kerosene and light oil / wall-mounted) ◎ Measured refueling for kerosene and light oil ◎ Pump and flow meter in one box 《Benefits》 ● Maximum discharge rate of 70L per minute ● Easy to see the amount dispensed at a glance ● Manage usage effectively ● No worries about overflow with automatic stop when the container is full ● Continuous operation possible 《Features》 ● Power supply 100V ● Flow meter and auto-stop gun included as standard ● Pump power automatically turns off when the gun nozzle is stored

• Flow Meter

Transfer and portioning of kerosene and light oil contained in tanks and containers.

"ERF Series" ERF-20B (for oil) ◎ Hand-cranked pump that requires no power source ◎ Widely usable from household drums to factories "Benefits" ● Easy operation by simply turning the handle ● Possible to connect hoses at both ends ● No power supply needed ● Can be used with A heavy oil and low viscosity oil (below 500 cP) ● Very useful in emergencies and disasters "Features" ● Continuous pumping is possible ● Threaded at both ends (Rc3/4) ● Comes with a base * A version without a base is available as an option.

• Other pumps

Convenient for supplying AdBlue in small quantities to cargo vehicles, construction machinery, agricultural machinery, and large vehicles.

**D-SET Series** D-SET100 (for AdBlue) ◎ PSE (Electrical Appliance and Material Safety Law) compliant product ◎ Acquired AdBlue license in 2011 Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction machinery and agricultural machinery, and as needs change, we are currently developing and importing AdBlue products suited to Japan in response to customer feedback. ◎ Dedicated pump that can be attached to a plastic drum **Benefits** ● Ensures safety during movement and refueling by securely fixing to the top of the drum ● Comes with a manual gun nozzle for easy dispensing **Features** ● For 200L plastic drums (plastic drum sold separately) ● Power supply: AC100V ● Diaphragm pump type ● Maximum discharge head: 6m, maximum discharge rate: 22L/min ● Built-in thermal protector for safety and peace of mind

• Other pumps

Convenient for supplying AdBlue in small quantities to cargo vehicles, construction machinery, agricultural machinery, and large vehicles.

"EV Series" EV-100Ad (for AdBlue / 100V) EV-12Ad (for AdBlue / 12V) EV-24Ad (for AdBlue / 24V) ◎ PSE (Electrical Appliance and Material Safety Law) compliant product ◎ Acquired AdBlue license in 2011 Aqua System is the only pump equipment manufacturer in Japan certified by the German Association of the Automotive Industry. As the market gradually expands from trucks and buses to construction machinery and agricultural machinery, and as needs change, we are currently developing and importing AdBlue products suitable for Japan to respond to customer feedback. ◎ Three types available according to application ◎ Customizable "Benefits" ● Comes with a hose nipple, just insert the hose (recommended hose inner diameter φ19) ● Made of resin, lightweight and compact "Features" ● Power supply: AC100V, DC12V, DC24V ● Diaphragm pump type ● Built-in thermal protector for safety

• Other pumps

Ideal for sites where electricity is unavailable! Air diaphragm pump with stepless adjustment function.

The "ADO Series (ADO-40/ADO-50)" is a safety air-driven diaphragm pump suitable for sites where electricity cannot be used, such as tunnel construction and underground work. It comes with a stepless adjustment feature (air speed controller) and can also be used for disaster response. Additionally, we offer electric hybrid diaphragm pumps "EDO-40/50" and hand diaphragm pumps "HDO Series." 【Features】 ■ Stepless adjustment feature ■ Safety air-driven ■ Safe as it does not use electricity, preventing electric leakage ■ Ideal for water suction work in narrow spaces, small holes, and confined areas ■ Usable for disaster response *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

Transporting hardened oil is a breeze! Jacket heaters that fit perfectly around containers, and more.

We offer a variety of pumps and related products that will be useful in the upcoming season when temperatures drop and oil becomes thick. We have products that help reduce frustration during liquid transfer in winter and cold regions, such as the jacket heater "HTJ Series," which warms oil in containers like pails, one-gallon cans, and drums to lower viscosity. 【Product Lineup】 - Air-driven pressure pumps - Electric high-viscosity oil pumps - Heat jackets for containers "HTJ Series"… and more *We are currently providing materials that introduce our products. Please feel free to contact us for inquiries.

• Other pumps

On September 11, 2025, AC Tasarim, a cable blade manufacturer, and our company signed a sales agency agreement for Japan. This was also announced in the company's press release and on social media. Founded in Turkey in 2003, AC Tasarim manufactures flexible EMI cable shields (copper braid), polyester braid, meta-aramid braid (Nomex cable sleeves), flat copper braid busbars/ground braids, all AA59569-coded copper braids, and released AeroBraid in 2025, the world's lightest EMI braid. All manufactured copper braids are certified to military standards. AC Tasarim products hold key certifications including VDE/VG certification, German Federal Armed Forces certification, NATO NSN coding, AS9100 quality certification, and JOSCAR certification. Cable braids and EMI shielding products, essential for wire harnesses in the aerospace and defense industries, are becoming increasingly difficult to source as demand rises. TC Tasarim products are stocked by manufacturers and distributors to ensure quick response times.

The "CCS2" is a ceiling-mounted vehicle counting sensor that employs an infrared reflection method. It can detect vehicles in both directions with just one unit, accurately counting vehicles even during traffic jams or when vehicles pass each other. Additionally, this product can be used not only for vehicle counting but also as a sensor for departure warnings. Furthermore, by using a separately sold dedicated remote control, it is easy to reset the sensor alone, switch the counting direction, and change the patterns of the departure warning timer. 【Features】 ■ Angle adjustment is possible up to ±5° ■ Can be installed in locations with high ceilings up to 4m ■ Detection area consists of 40 spots, allowing for wide-range detection ■ The display LEDs are color-coded by direction, making operation confirmation easy.

Many people may have questions like, "What can be done with IoT?" and "What is needed?" upon hearing the term IoT. Through digital communication, it is possible to obtain various information such as flow sensors, valves, circuit boards, and abnormal monitoring that were not accessible with traditional analog control. For example, by monitoring the valve opening, one can detect blockages in the equipment and identify leaks from cumulative flow. This information directly contributes to reducing downtime and improving quality through continuous long-term monitoring and knowledge-based management. Compatible models include those with digital communication via RS485, in addition to traditional analog controls like 0-5VDC and 4-20mA. (Older models such as the 58xxS, MfxxS series, SLA58xxS, and SLAMfxxS series). Even older models that do not support digital communication can be upgraded to the latest mass flow models, enabling digital communication. The dimensions between new and old models are the same, and no wiring changes are necessary. Additionally, we can provide control boxes for data collection from mass flow. This enables a "visualization" of small IoT without making large changes to the equipment.

Model SLA5850/SLA5851/SLA5853/SLA5860/SLA5861/SLA5863 "With just one unit, you can use 14 types of pressure and flow rates in a single process." Imagine such a mass flow controller platform. Moreover, it features excellent reproducibility, precision, and repeatability. This is the evolved simple performance of the SLA5800 series mass flow controllers/meters. The SLA5800 series boasts high accuracy, zero point stability, and repeatability that are characteristic of Brooks Instrument, a leader in mass flow measurement and control technology. Equipped with configurable advanced multi-gas/multi-range capabilities, it offers superior zero drift specifications compared to competing products while demonstrating long-term maintenance of factory calibration and accuracy.

Model SLAMf50 / SLAMf51 / SLAMf53 / SLAMf60 / SLAMf61 / SLAMf63 / SLAMf64 "Durability to withstand harsh environments! Achieving excellent precision with precise mass flow control" Whether indoors or outdoors, in environments with dust or places that handle water, the 'SLAMf series' elastomer seal thermal mass flow controllers/meters provide proven high precision and long-term stability unique to the "SLA5800 family." Applications ■ Pilot plants for petrochemical and chemical gases ■ Life science bioreactors ■ Blanketing in food processing