Announcement of the launch of the 0.5mm pitch floating connector "DY Series" with a gold plating thickness of 0.1μm.

Small Floating Connector 0.4mm Pitch Floating Connector DU Series

The DU series is a 0.4mm pitch floating connector. It achieves productization with the industry's smallest contact pitch of 0.4mm for floating connectors. When compared to our 0.5mm pitch floating connector DY series, the board space occupied is reduced by approximately 48% for the plug and about 31% for the receptacle. Despite the 0.4mm pitch, it allows for ±0.4mm movement in the XY direction, which can absorb assembly tolerance deviations in equipment. The mounting method is vertical direct connection. The contact area on the plug side has an arc shape, similar to the DY series, making it difficult to catch foreign objects. The receptacle eliminates terminal exposure on the bottom surface, preventing foreign object intrusion and allowing for pattern wiring at the contact bottom. The effective mating length of the DU series is 1.2mm, ensuring reliability during mating. The contact method is a contact cantilever type. The number of contacts can expand up to 200, compared to a maximum of 140 in the DY series. For 200 contacts, a compact design of 40.36mm in the longitudinal direction and 7.5mm in the width direction is achieved. The stack height is from 7mm. As a dust prevention measure, the receptacle side is equipped with Kapton tape for automatic mounting, sealing the mating port.

• Other Connectors

Stack height 25mm! We have developed additional variations of the high stack type.

We have developed the 'DT Series' floating connector with a 0.5mm pitch that supports high-speed transmission, featuring a stack height of 25mm. It ensures a high floating amount of ±1.0mm in the XY direction, enabling high-speed serial transmission equivalent to 8Gbps. We offer seven types of pin counts ranging from 30 to 140 pins, and by combining them with the existing receptacle side of this series, it can also accommodate a stack height of 15mm. 【Features】 - 0.5mm pitch floating connector compatible with high-speed transmission - Transmission characteristics support high-speed serial transmission equivalent to 8Gbps - High floating amount of ±1.0mm in the XY direction - High-reliability design with an effective mating length of 1.5mm - Compatible with a stack height of 25mm - Seven types of pin counts: 30, 40, 60, 80, 100, 120, and 140 pins *For more details, please refer to the PDF document or feel free to contact us.

• Other Connectors

Not only can it absorb positional misalignment during fitting, but it can also accommodate positional misalignment after fitting due to rotation from tightening screws!

A "floating connector" is a connector equipped with a floating mechanism that absorbs vertical and horizontal errors that occur when mounting the connector onto a circuit board. By allowing the connector to move, it can absorb errors and misalignments during mating, preventing issues such as cracks in the circuit board. It is widely used in devices where circuit boards are densely packed, such as car navigation systems, digital cameras, and semiconductor control devices. 【Features】 ■ Equipped with a floating mechanism ■ Absorbs errors and misalignments during mating by allowing the connector to move ■ Prevents issues such as cracks in the circuit board *For more details, please refer to the PDF document or feel free to contact us.

• Board to Cable Connector

The connector's connection part is movable to absorb stress! It is widely used in both industrial and consumer equipment.

At KERU Corporation, we handle compact and high-performance "Floating Connector" products. Under the general term "D-Sign Floating," we have developed a series of new products, starting with the 0.5mm pitch connector "DY series," followed by the 0.635mm pitch connector "DW series," the 0.4mm pitch connector "DU series," and evolving into the next-generation 0.5mm pitch floating connector "DT series," which supports three-dimensional, multi-pole, and high-speed transmission. These connectors are characterized by their compact size, multi-pole capability, and high-speed transmission. 【Features】 ■ Produced in a clean area ■ Multiple connectors can be used together ■ Expanded design possibilities, enabling unprecedented designs ■ Single-point contact on the roll surface ■ Ensures a pathway for foreign objects during wiping, preventing foreign object entrapment *For more details, please refer to the PDF materials or feel free to contact us.

• Board to Cable Connector

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without any thermal impact on the base material. Repairs can be conducted in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is required, please contact us.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

From turning processing to milling processing—responding to process integration with composite machining centers C&G Systems Co., Ltd. has released the lathe module "TURNING," which realizes the "true process integration" required in the era of composite machining centers. By covering 2D and 3D milling, wire electrical discharge machining, and turning processing, "EXCESS-HYBRID II / Parts CAM" has evolved into an ALL-IN-ONE CAM system that transcends the boundaries of processing fields. The lathe module "TURNING" was developed against the backdrop of voices from the field, where the advancement of high functionality and integration of NC machine tools has led to continued reliance on interactive input and manual programming, resulting in increased man-hours, occurrence of errors, and a shortage of skilled technicians. While composite machining centers have the significant advantage of completing both turning and milling in one machine, the diversification and complexity of processed shapes have made programming advanced and intricate, necessitating measures against interference risks and efficient process design. "TURNING" achieves a reduction in programming time and stable quality reproduction, maximizing the performance of composite machining centers.