[Acquired SIAA dual certification mark for antibacterial and antiviral incorporation] Effectiveness lasts with just a water wipe on the surface! Implement long-term measures against the novel coronavirus with 'KOYO Air Pass Roll Screen & Air Pass Curtain'! Be sure to check for the 'flame retardant mark'!

Transparent roll screen and transparent curtain for 'splash prevention' when sufficient distance cannot be secured between each other [high transparency + flame-retardant specifications].

★ The fire from the stove ignited the vinyl curtains and disinfectant... A two-story wooden store was completely burned down, with one person in critical condition and 11 others injured. There has been an increase in fires at restaurants and homes compared to last year. Many of you may have installed non-fire-retardant vinyl sheets as an emergency measure, but from a disaster prevention perspective, there is a growing possibility of receiving warnings from the fire department in the future. Please make sure that the products you use have the "fire-retardant certification label" and are fire-retardant processed products. ■ Antiviral processing, antibacterial processing, fire-retardant processing 【Antiviral processing】 Organic synthetic type, blended PVC sheet/body (JP06125409X0007K) 【Antibacterial processing】 Organic synthetic type, blended PVC sheet/body (JP0122409A0002V) ● Reduces specific viruses on the product. ● Antiviral processing is not intended for the treatment or prevention of diseases. ● Complies with SIAA safety standards.

• others

We will be exhibiting at the "New Manufacturing and New Services Exhibition for Small and Medium Enterprises" from December 16 (Tuesday) to 18 (Thursday), 2025. Please feel free to stop by our booth. We look forward to meeting everyone.

Would you like to have that product certified as "Accredited calibration"? Our company conducts calibration of pressure category "leak gauges" as a registered business under the Measurement Law Calibration Business Registration System (JCSS). Additionally, we are accredited by the Japan Accreditation Board (JAB) as a calibration organization compliant with the international standard ISO/IEC 17025, and we perform calibration of "flow rate," issuing calibration certificates with symbols. Fukuda is an accredited calibration organization compliant with international MRA.

[To the owners of parking lots and parking lot construction companies] "I'm worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those facing sidewalks or roadways are particularly prone to dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surroundings with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Vehicle Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.