We have released an image of the introduction of industrial energy storage systems.

Ideal for realizing a resilient society! Contributes to CO2 reduction and significantly reduces energy consumption through energy creation.

The industrial storage battery system <BLP> corresponds to the operation of the storage system defined in the resilience ZEB demonstration project. Our industrial storage battery system contributes to planning that integrates environmental considerations and crisis management, as well as the realization of efficient facility operation and energy solutions aimed at ZEB. By combining solar power generation and storage batteries, we effectively utilize renewable energy sources. This contributes to CO2 reduction and significantly decreases energy consumption through energy creation. Furthermore, in the event of a power outage due to a disaster, surplus electricity can be used, enabling autonomous energy security. 【Features】 ■ Effective utilization of renewable energy sources by combining solar power generation and storage batteries ■ Contribution to CO2 reduction (supporting decarbonization efforts) ■ Significant reduction in energy consumption through energy creation ■ Ability to use surplus electricity in case of a power outage, enabling "autonomous energy security" ■ Suitable for realizing a resilient society *For more details, please refer to the PDF document or feel free to contact us.

• Lithium-ion battery
• Other safety equipment
• Power storage device

A compact outdoor installation type that does not require housing storage!

The industrial storage system <BLP> from Connex Systems is an outdoor installation type that can accommodate both emergency power supply and daily self-consumption. It is an industrial storage system that contributes to BCP measures for public facilities and businesses, as well as to reducing environmental impact and contributing to the community. This compact outdoor installation integrates the PCS and battery enclosure, contributing to space-saving. The capacity required for emergencies can be reasonably increased as needed, making it suitable for BCP applications. 【Features】 - Compact outdoor installation type that integrates the PCS and battery enclosure - Contributes to space-saving - Rated output of 30kW / storage capacity of approximately 73.7kWh - Contributes to BCP measures for facilities and businesses, as well as reducing environmental impact through self-consumption - A system well-suited for BCP applications With an output of 30kW, it can supply electricity to three-phase power sources, making it possible to operate large air conditioners, commercial refrigerators, elevators, machine tools, large motors, pumps, and more during power outages. *For more details, please refer to the PDF document or feel free to contact us.

• Other safety equipment
• Power storage device

Achieving BCP for large hospitals, clinics, and research facilities from medical offices! As a backup power supply for medical devices and essential equipment.

**"For essential operations that cannot be stopped even during disasters"** In the event of a prolonged power outage, fuel shortages may render emergency power generation equipment unusable. By introducing solar power generation systems and storage systems that do not require fuel, we can ensure power supply during outages. **"Backup for three-phase power equipment is OK"** Even in clinics and small hospitals, the introduction of storage systems allows for BCP measures that ensure the safety and security of patients, enabling a wide range of backups from computers to elevators. **"Storage batteries contribute to disaster prevention capabilities"** Storage systems can be utilized for power supply measures for various electronic devices used in nursing care facilities, such as medical equipment and heating/cooling systems. By introducing storage systems, concerns about fuel stockpiling are eliminated, allowing for backup of various equipment and devices. **"Installation Locations"** ■ Clinics, medical facilities, dental clinics, obstetrics and gynecology, nursing care facilities, research facilities, etc. *For more details, please refer to the PDF document or feel free to contact us.*

• Other safety equipment
• Power storage device
• Other energy equipment

Cost reduction and reduction of environmental impact! Control "maximum demand" to contribute to lower electricity costs. Reliable BCP and power outage measures with solar power generation equipment and storage batteries!

Are you struggling with energy conservation in warehouses, factories, or large commercial facilities? ○ Rising electricity costs ○ Rising fuel costs ○ Specific energy-saving measures, etc. As the demand for more efficient energy use and management increases, the introduction of storage batteries is highly effective for energy conservation measures in warehouses and factories. When combined with solar power generation, it becomes an effective solution for reducing facility costs, addressing environmental impact issues, and disaster preparedness. Additionally, it serves as an effective means of ESG investment, contributing to an increase in corporate value. The introduction of industrial storage systems, when combined with solar power generation, is very effective as an energy conservation measure for facilities and also contributes to reducing electricity costs. By forcibly discharging during peak usage times, it controls "maximum demand" and helps reduce electricity costs. Furthermore, with scheduled settings, charging and discharging of generated power can be done by time zone, achieving peak shift effects. [Implementation Locations] ■ Environmental measures and energy conservation applications for factories, warehouses, and large commercial facilities *For more details, please refer to the PDF document or feel free to contact us.*

• Secondary Cells/Batteries
• Lithium-ion battery
• Power storage device

Introducing industrial storage batteries for BCP measures in locations that can serve as disaster prevention bases or evacuation centers during emergencies! (National Resilience)

Abandoned schools and roadside stations are gaining attention as evacuation sites and disaster prevention bases for residents during emergencies. By installing industrial storage battery systems at these disaster prevention bases, the region's disaster resilience can be enhanced. When solar power generation is introduced simultaneously, it is possible to supply power to specific loads from the generated electricity and the capacity of this product, enabling a response to long-term power outages. It can be installed in a compact outdoor setup that does not require housing, saving space. [Installation Locations] ■ Public facilities, government offices, community centers, schools, elderly care facilities, roadside stations, commercial facilities, supermarkets, etc. [Achieving Disaster Preparedness and Energy Savings with Industrial Storage Batteries] By combining solar power generation and storage batteries, natural energy sources can be effectively utilized. This can lead to benefits such as reducing CO2 emissions and fulfilling CSR (Corporate Social Responsibility), adding value to energy savings and BCP (Business Continuity Planning) measures. *For more details, please refer to the PDF materials or feel free to contact us.

• Secondary Cells/Batteries
• Lithium-ion battery
• Power storage device

It is a large-capacity industrial storage battery with a three-phase connection, output of 30kW, and 73.7kWh, ensuring a reliable power supply even during prolonged power outages!

To quickly implement a BCP during a disaster, it is necessary to secure a minimum level of infrastructure. Connex Systems' industrial storage system can be used for power equipment such as water supply pumps with a three-phase, three-wire output of 30kW. By incorporating a transformer, it can also support single-phase devices like lighting, televisions, and air conditioning, making it possible to back up commercial refrigerators and industrial pumps. Additionally, with a large capacity of 73.7kWh, this storage system/battery can reliably supply power even during prolonged outages. [Installation Locations] ■ Condominiums and Offices Power outages that may occur due to disasters can also lead to simultaneous water supply interruptions in condominiums. This is because electric pumps are used to deliver water to upper floors. It is one of the essential devices that would be problematic if stopped during a disaster, as it is used in a wide range of facilities from buildings and hotels to food factories. Connex Systems' industrial storage battery can supply electricity to three-phase power sources with an output of 30kW, allowing for the backup of three-phase equipment such as electric pumps. *For more details, please refer to the PDF materials or feel free to contact us.

• Lithium-ion battery
• Power storage device
• Multifunction printer

Large-capacity, compact industrial storage system for disaster prevention, mitigation, and preparation for power outages during emergencies.

【Power Outage and BCP Measures】Industrial Storage Battery System Compact yet high-capacity! Achieves both power supply during emergencies and daily self-consumption (rated output 30kW / storage capacity 73.7kWh). A medium-sized industrial storage battery system that contributes to BCP measures for public facilities and businesses, reduces environmental impact, and supports local communities. Are you fully prepared for power outages caused by natural disasters that can occur at any time? The demand for storage batteries is increasing from facilities that serve as disaster response centers, such as hospitals, local governments, and childcare and nursing facilities. By introducing storage batteries, you can enhance disaster preparedness in schools, evacuation centers, roadside stations, and other community facilities. Additionally, it is suitable for maintaining operations in corporate offices, factories, warehouses, condominiums, large commercial facilities, dairy and livestock farms, and for backing up various industrial equipment. A reliable power outage measure with a high-output, high-capacity storage system/battery. A high-spec system with a rated output of 30kW and a storage capacity of 73.7kWh is made affordable. Conex Systems' medium-sized industrial storage battery system contributes to securing power supply during emergencies.

• Lithium-ion battery
• Other environmental equipment
• Power storage device

A disaster prevention, mitigation, and industrial storage system that ensures power supply during emergencies and supports daily self-consumption. Achieving groundbreaking price, performance, and safety!

The industrial storage system from Connex Systems, the BLP, is designed for outdoor installation and can accommodate both emergency power supply and daily self-consumption. Additionally, its compact design integrates the PCS and battery housing, contributing to space-saving. It is a system suitable for BCP applications that can be reasonably scaled up to meet only the necessary demands during emergencies. 【Features】 - Rated output: 30kW / Storage capacity: approximately 73.7kWh - Contributes to BCP measures for facilities and businesses, as well as reducing environmental impact through self-consumption - Compact outdoor installation type that does not require housing storage This industrial storage system is characterized by its compatibility with PV systems, allowing the PV power conditioner to operate independently during power outages without entering self-operation mode, enabling normal power generation. It can handle prolonged power outages in conjunction with solar power generation. Additionally, during normal operation, it allows for efficient power usage through peak cut and peak shift. With a 30kW output, it can supply electricity to three-phase power sources, making it possible to operate large air conditioners, commercial refrigerators, elevators, machine tools, large motors, pumps, and more during power outages. *For more details, please refer to the materials. Feel free to contact us with any inquiries.*

• Secondary Cells/Batteries
• Lithium-ion battery
• Power storage device

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is kept to a minimum. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

This is an air leak tester for battery cases of electric vehicles (EVs). The battery case has the characteristic of being "large with a significant internal volume, and its structure may deform due to internal pressure." As a result, air leak testing generates "noise caused by its large size and capacity" and "noise caused by expansion or deformation due to internal pressurization." To mitigate this noise, this device features a newly developed smoothing function and a linear fitting correction function used in combination during measurement. Additionally, to achieve low-pressure control that is difficult to manage and to expand flow for large volumes, we provide a bypass box (CBU-600) equipped with an electro-pneumatic regulator for precise pressure control and a pressurization valve with a large effective diameter to supply high flow rates. Measurement methods: Work-Work comparison, Work-Master comparison, Fixed Master comparison Measurement pressure range: 10 kPa, 20 kPa, 50 kPa (depending on specifications) Gauge pressure sensor accuracy: ±2% F.S. Differential pressure sensor accuracy: ±0.5% F.S. Group settings: 0 to 31 groups Power supply voltage / Power consumption: AC100 to 240 V / 100 VA