Delivery of combined equipment featuring magnetic separators and high-performance aluminum sorting machines.

Collect and sort valuable metals such as copper, aluminum, and brass! ~We will provide proposals to increase added value~

What kind of system is the non-ferrous metal sorting system? - It is a recovery system for non-ferrous metals that combines our non-ferrous metal sorting machine, conveyor system, and color sorter. 1. Non-ferrous metals (copper, aluminum, brass, etc.) are sorted using eddy currents in the non-ferrous metal sorting machine. 2. The sorted non-ferrous metals (copper, aluminum, brass, etc.) are transported by the conveyor system. 3. The non-ferrous metals (copper, aluminum, brass, etc.) are sorted by color using the color sorter. What are the benefits? - Recovery of valuable amounts from processed materials. - Reduction of the number of personnel required for manual sorting, leading to lower labor costs.

• Automatic sorting machine
• Other conveying machines

With a double coil design, we deliver unprecedented high performance!

What is an electromagnetic drum-type magnetic separator (double coil)? It is a drum-type magnetic separator that uses electromagnets. A typical electromagnetic drum-type magnetic separator combines electromagnets and permanent magnets, but this electromagnetic drum-type magnetic separator (double coil) uses electromagnets for both the main and auxiliary poles! What are the advantages of the electromagnetic drum-type magnetic separator (double coil)? - By constructing the entire magnetic circuit with electromagnets, magnetic force is increased! → It can recover magnetic materials that were difficult to attract with conventional drum magnetic separators. - Improved maintenance - Magnetic force can be adjusted → In the case of permanent magnets, it is not possible to adjust the strength of the magnetic force, but with this electromagnetic drum-type magnetic separator (double coil), our unique voltage control allows for stepless adjustment of the magnetic force.

• Other conveying machines

Compared to our conventional machines, the recovery rate of magnetic materials has significantly improved!!

A high-performance model of the electromagnetic suspended magnetic separator has been developed! - Improved magnetic circuit increases the magnetic flux density at the ends of the conveyor belt by up to 25%. - The magnetic flux density directly below the separator increases by up to 15%. → Compared to conventional models, the iron recovery rate has significantly improved! - Compact design with the same size as the existing lineup. → Minimal modifications are needed during the replacement of existing machines, making the installation process smooth! Custom manufacturing is also possible. - Designed and manufactured to match existing connections!

• Other conveying machines

Detect the color of the processed material and sort it using air blow!

◆Features of the Color Sorter◆ 〇Detection of processed materials using CCD cameras from two directions (top and bottom). →High-precision sorting is possible as the materials can be identified from both the front and back using cameras. 〇Two-stage system →The sorting unit is divided into two stages (upper and lower), allowing for coarse sorting followed by fine sorting in one pass. Additionally, settings can be adjusted for the upper and lower stages, enabling configurations tailored to specific purposes such as sorting into three categories.

• Other conveying machines

It is a compact and high-performance lifting magnet that can be attached to heavy machinery such as hydraulic excavators.

【Features】 〇 Easy to install on hydraulic excavators, and with no vibration from the magnet, operators can handle scrap reliably and quickly! 〇 Special brackets are provided for installation, making it easy to attach and detach from the arm!

• Other conveying machines

Are you having trouble with weakly magnetic materials, including deformed stainless steel, which are difficult to recover using conventional magnetic separators?

- Achieved a high magnetic force of 1.3T (13,000G) on the pulley surface through a unique magnetic pole design! - It is possible to recover weakly magnetic materials and deformed stainless steel, which cannot be collected by conventional magnetic separators, using magnetic force! - Due to the permanent magnet system, it can be used for many years. - Custom manufacturing is also available. ◎ Manufactured in sizes tailored to your equipment and facilities Not only standard products but also specifications that match the connection parts are manufactured. * We also produce belt-type and drum-type (drum shell surface: approximately 0.8T) models.

• Sorting machine

Please compare the recovery rate and purity of non-ferrous metals! This is the "high-performance" non-ferrous metal sorting machine MSK series, which has significantly improved sorting performance compared to the standard type.

【Significant Improvement in Sorting Accuracy!】 The magnetic drum with "eccentric structure" that has been implemented traditionally has been significantly powered up with our unique design!! By extending the flight distance of non-ferrous metals, we have achieved a substantial increase in the recovery rate and purity of non-ferrous metals. 【What’s Good About the Eccentric Structure?】 - Reduced Maintenance Frequency Compared to the concentric structure, the eccentric structure has lower magnetic force at the bottom of the magnetic drum, which significantly reduces the frequency of belt damage caused by the entrapment of magnetic materials (such as iron) and the breakage of FRP drum shells! - Improved Recovery Rate and Purity By applying an alternating magnetic field concentrated at an optimal position, the flight distance of non-ferrous metals is enhanced. As a result, the recovery purity and recovery rate of non-ferrous metals (such as copper, aluminum, brass, etc.) increase.

• Conveyor

For sorting stainless steel! For the recovery of lithium-ion batteries!

High magnetic force capable of recovering stainless steel - This is a high magnetic force magnet pulley designed for stainless steel sorting machines. * The recoverable stainless steel may vary depending on shape, material, weight, etc. Custom manufacturing is also available - We design and manufacture to the size that fits your equipment and facilities.

• Belts and pulleys

By replacing the conveyor head pulley with a magnetic pulley, it can be used for the recovery of ferromagnetic materials.

〇 For the recovery of ferromagnetic materials - Since it is a permanent magnet type, the magnetic force does not diminish unless heat or shock is applied, allowing for long-term use! 〇 We also accept custom-made production - We design and manufacture to dimensions that match existing pulleys and equipment sizes. - Processing of the bearing end is also possible. - We can also accommodate requests for high magnetic force types and rubber lining specifications.

• Belts and pulleys

Automatic collection of non-ferrous metals (copper, aluminum, brass, etc.) contributes to labor saving!

Mitsubishi Nagasaki Kiko's non-ferrous metal sorting machine is different here! - The core magnetic rotor adopts an eccentric structure, resulting in less entanglement of materials between the drum and the belt, leading to a "long lifespan." - Additionally, compared to a concentric structure, the magnetic gradient of the alternating magnetic field in the magnetic rotor is larger, which enhances the sorting capability of non-ferrous metals. - As a result, it can sort a wide range of non-ferrous metals, from large pieces to fine ones.

• Other processing machines

Reduce running costs with permanent magnets! For permanent magnetic suspension separators and various magnetic separation machines, please consult Mitsubishi Nagasaki Machinery.

The permanent magnet suspended magnetic separator is a suspended magnetic separator that uses a powerful permanent magnet instead of an electromagnet. - It operates on a permanent magnet system, significantly reducing running costs as power consumption is only from the electric motor. - The magnetic force does not decrease unless subjected to heat or shock, ensuring stable performance. - Its simple and robust structure allows for flexible installation locations. - Maintenance is extremely easy. - Its compact and low-profile design enables installation in tight spaces.

• Other processing machines

Leave the recovery of iron and magnetic materials to the electromagnetic overhead magnetic separator manufactured by Mitsubishi Nagasaki Machinery! It is suspended above the conveyor to collect ferromagnetic materials from the transported items.

The suspended magnetic separator is a device that is hung above a belt conveyor or a vibrating conveyor to collect ferromagnetic materials such as iron pieces and iron lumps mixed in the transported items.

• Other processing machines

Removal of weak magnetic materials! For recovery! If you are looking for a powerful permanent magnet drum magnetic separator, please contact Mitsubishi Nagasaki Machinery.

This is a high-magnetic drum magnetic separator that achieves a higher magnetic force than usual! We have achieved a high magnetic force of over 0.8 Tesla on the surface of the drum shell. - Recovery of weak magnetic materials mixed in powders (removal of iron rust contaminants mixed in carbon raw materials, etc.) - Recovery of rare metals from crushed materials of mobile phones and air conditioners 〇 We also accept custom-made production (there are limitations on the sizes that can be manufactured) - Designed and manufactured to fit existing equipment and devices.

• Other processing machines

If you are looking for an energy-saving magnetic separator of the permanent magnet type, please consult Mitsubishi Nagasaki Machinery.

We have a permanent magnet drum magnetic separator equipped with a powerful permanent magnet inside the drum. You can download the PDF materials from the link below. - Since the power consumption is solely from the electric motor, running costs can be significantly reduced! - It uses a powerful permanent magnet with no demagnetization, providing stable and large processing capacity. - Custom manufacturing is also available. ○ Manufactured to sizes that fit existing equipment and facilities. *Please note that there are limitations on the sizes that can be manufactured, so for details, please consult us separately.

• Other processing machines

It is a drum magnetic separator equipped with a powerful electromagnet inside the drum. It excels in the recovery performance of iron and magnetic materials.

The electromagnetic drum magnetic separator is a drum magnetic separator that incorporates a powerful electromagnet inside the drum. It attracts ferromagnetic materials such as iron to the surface of the drum, and through the rotation of the drum, moves them outside the magnetic field range for separation. 【The electromagnetic drum magnetic separator is recommended for those who:】 - Want to recover a large amount of magnetic materials - Want to remove ferromagnetic materials such as iron

• Other mounting machines

This is the comprehensive catalog of industrial machinery from Mitsubishi Nagasaki Machinery. Available for free distribution!

This is the comprehensive catalog of industrial machinery handled by Mitsubishi Nagasaki Machinery. With advanced integration of engineering and manufacturing, we respond to our customers' diverse needs! ◆◆ Contents ◆◆ ○ Products related to forging machinery Various types of forging presses Large rolling mills ○ Products related to environmental plants Various types of plants Aluminum sorting machines Magnetic sorting machines ○ Products related to general machinery Link conveyors Vibration isolation devices ○ Products related to steel structures Various types of cylinders Reactors etc. ● For other functions and details, please download the catalog.

• Processing Contract

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

On September 11, 2025, AC Tasarim, a cable blade manufacturer, and our company signed a sales agency agreement for Japan. This was also announced in the company's press release and on social media. Founded in Turkey in 2003, AC Tasarim manufactures flexible EMI cable shields (copper braid), polyester braid, meta-aramid braid (Nomex cable sleeves), flat copper braid busbars/ground braids, all AA59569-coded copper braids, and released AeroBraid in 2025, the world's lightest EMI braid. All manufactured copper braids are certified to military standards. AC Tasarim products hold key certifications including VDE/VG certification, German Federal Armed Forces certification, NATO NSN coding, AS9100 quality certification, and JOSCAR certification. Cable braids and EMI shielding products, essential for wire harnesses in the aerospace and defense industries, are becoming increasingly difficult to source as demand rises. TC Tasarim products are stocked by manufacturers and distributors to ensure quick response times.

Starting from September 22, 2025 (Monday), we will begin accepting orders for five new lineups tailored to various applications in the "N-SELECT" series of transport vehicles. In this new development, we will introduce the following five models that maintain the basic performance of the traditional N-SELECT while addressing more specialized needs: SC (Super Carrier) - Based on the traditional N-SELECT, this model is specialized for transporting immobile and accident vehicles. It is ideal for the automotive maintenance and towing industry. RC (Racing Carrier) - Designed with a gentle loading and unloading angle, this model is perfect for transporting sports cars and lowered vehicles. TP (Transporter) - A standard model optimized for the transportation of general passenger vehicles, suitable for a wide range of industries. ONE (Single Vehicle Loading Model) - A simple and efficient design dedicated to loading one vehicle. Recommended for small-scale transport and individual entrepreneurs. RS (Rescue) - A single vehicle loading model equipped with a crane, enhancing its capability to respond in accident scenes and tight spaces. With these lineups, N-SELECT evolves into a product group that meets a wider variety of on-site needs. We will continue to promote product development that reflects the voices from the field as the "preferred transport vehicle."