GHS Quick Change Tool Holder by Toyokuni Engineering Co., Ltd. for speeding up setup changes and tool replacements, increasing the operating rate of mass production equipment.

Thread cutting die head

The threading die head is designed to produce precise male threads in a short amount of time. It can be used for regular type cutting, high-quality screws, left and right threads, cylindrical screws, and conical screws. For conical screws, trapezoidal threading cuts are suitable. It can be made into special shapes like others, and it accommodates both British and American standards. The exchange of the chaser and chaser holder can be easily performed. This allows for the production of a wide range of dimensions and types of screws, and setup changes from one product to another can be done in a short time. It can process materials such as steel, high alloys, copper, aluminum alloys, and non-metals. There are three types of head: miniature head, standard head, and large head, with the miniature head available in two types: station type and rotation type.

• Other machine tools

Screw rolling head

With simple exchanges within the processing range of the thread rolling head, it is possible to quickly roll various types of screws. Both right-hand and left-hand screws can be produced. The thread rolling head comes in either stationary or rotating types, and the appropriate type is selected based on the machine being used. The stationary type is a unit that rolls threads against a rotating workpiece. The head opens due to the machine's feed stop or an internal stopper. The closing of the head is performed either manually with a handle or by using a closing cam with a closing roll. For example, it is used attached to the revolver part of an automatic lathe. The rotating type is a unit that rolls threads against a fixed workpiece. The opening of the RAR type head is achieved by moving the closing mechanism backward. The closing is done by moving the closing ring forward. The opening of the RR type head is done by moving the closing ring forward, while the closing is achieved by moving the closing mechanism backward. For example, it is used attached to the sleeve of a processing device or the spindle of a sliding carriage.

• Other machine tools

Screw rolling attachment

It is optimal for screw rolling processing from the axial direction. The screw rolling attachment is used mounted on a tool holder. Screw rolling processing can be performed on various types of machines such as single-axis automatic lathes, multi-axis automatic lathes, and NC lathes. The attachment performs screw rolling processing by pressing two synchronized rolling rolls against the workpiece through constant feeding from the cross direction. It can maximize the utilization of pitch, diameter, and shape. There are eight types of screw rolling attachments, which are tools capable of processing screws with larger diameters. Using Wagner's patented tools, such as types B14, B16, and B19, yields the best results. Especially for very small screws, it is necessary to perform rolling on the axis as weakly as possible. Wagner's tools can roll with a minimum step of 0.02mm.

• Other machine tools

It enables mirror finishing of the workpiece with the vanishing processing unit during the machining process on the automatic disc. 【Video available】

By mounting this unit on automatic lathes, we achieve improved surface roughness within the automatic machining process. No special machinery is required. The surface roughness improvement process using BAUBLIES' roller burnishing is highly reliable, fast, and easy to handle. It can be easily integrated into your existing automatic machining processes. Not only does it improve surface roughness, but it also enhances surface height and is expected to improve wear resistance. In the roller burnishing process, there is no material consumption removed as chips. Therefore, it can improve the yield of material consumption. Roller burnishing economically achieves improved surface roughness. The cycle time required for processing is short, and it provides high surface roughness quality. Advantages: - A mirror-like surface with unevenness within 1μm - High material distribution that effectively covers the sides (less wear against consumption) - Reduces the risk of cracking through micro-notching - Improvement in corrosion resistance due to resistance.

• lathe
• Other machine tools
• Plastic processing machines (cutting and rolling)

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

This handy book clearly illustrates the variety of Parker cartridge valves, which come in a rich selection of models. The contents include a handbook featuring "check valves," "shuttle valves," "pressure control valves," "logic valves," "flow control valves," "pressure relief valves," "solenoid valves," "directional control valves," and "proportional valves," among others.

We are conducting a productivity improvement special campaign until the end of March 2025. Customers considering upgrading or adding rotary evaporators are encouraged to take advantage of this opportunity. The "Rotary Evaporator R-300," equipped with high-performance control and an electric lift, is available at a campaign price, including accessories such as a foam sensor that enables bumping prevention. Please check the flyer for more details. 【Target Products (Excerpt)】 ■ Rotary Evaporator R-100 ■ Rotary Evaporator R-300 (High-performance control type) ■ PTFE Diaphragm Vacuum Pump V-300 ■ PTFE Diaphragm Vacuum Pump V-600 (High vacuum type)

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.