A customer case study of KYB Corporation has been published! "Fluid Analysis (CFD) of a Vane Pump Using SimericsMP+ (formerly known as Pumplinx)"

Introducing a simulation of a spiral pump (centrifugal pump), which is an example of fluid analysis.

CFD provides a means to shorten product development time and reduce prototyping costs, as well as obtain detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be beneficial for product development using Simerics' CAE/CFD software. Centrifugal pumps, which utilize centrifugal force to draw up liquids, are widely used for water supply and irrigation, as well as for general industrial applications. An important challenge in the design process is that, due to the principle of expelling liquid with centrifugal force, cavitation tends to occur easily. Research and development are ongoing daily to suppress this and enhance pump efficiency and durability. However, doing so requires spending a lot of cost and time on prototyping and experimenting with centrifugal pumps. With Simerics' CFD, multiple cavitation models can be used, and erosion prediction is also possible, allowing for accurate and physically meaningful simulations! This is expected to significantly reduce man-hours and costs! There are still many reasons to use Simerics' CFD software. You can find more details through the link below, or feel free to contact us anytime!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Fluid analysis software for positive displacement pumps such as gear pumps and vane pumps! CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, with examples such as vane pumps for power steering and CVT, as well as trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should be demonstrated in a live demo!!

• Thermo-fluid analysis

Simulate the flow characteristics of volumetric pumps such as vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, please see the actual mesh creation and movement in a demo presentation!!

• Thermo-fluid analysis

Simulate the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the micrometer range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication. *There is a lot of information that cannot be posted online. Particularly, we encourage you to see the actual mesh creation and movement through a demo presentation!!

• Thermo-fluid analysis

Introduction to the simulation of a shell-and-tube heat exchanger, an example of thermal fluid analysis.

CFD provides a means to shorten product development periods, reduce prototyping costs, and obtain detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can assist in product development using Simerics' CAE/CFD software. Heat exchangers have various applications, including boilers, steam generators, and commonly in air conditioners, refrigerators, and automotive radiators. While it is essential to enhance heat transfer efficiency, there is also a demand for miniaturization, requiring various trial and error in the design process. However, designing requires significant time and costs for prototyping and experiments. In CFD simulations, computation time can often increase depending on the shape of the shell and the number of tubes. However, with Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid acquisition of results. The interior of the shell is also modeled in detail, replicating conditions close to actual experiments. This is expected to lead to significant reductions in man-hours and costs! There are many more reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• simulator
• Thermo-fluid analysis
• Contract Analysis

By utilizing the PumpLinx simulator for pump transient flow characteristics, smooth flow analysis within the vane pump can be conducted.

PumpLinx has mesh templates for various types of pumps. By using templates tailored to the specific pump type being analyzed, the time and effort typically spent on mesh generation for fluid analysis of standard pumps can be significantly reduced and streamlined. For example, even for complex mechanisms like vane pumps, optimal meshes for analysis can be quickly and automatically generated by setting parameters such as the number of vanes based on 3D CAD data. Additionally, the integrated GUI allows for smooth handling of operations such as mesh generation, setting analysis conditions, executing calculations, and displaying results all on a single screen, making the analysis easier and faster. Furthermore, many volumetric pumps, including internal gear pumps, may experience cavitation during the operating cycle. PumpLinx supports cavitation analysis through the adoption of high-precision cavitation models and cavitation damage models.

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for gear pumps, which other CAE software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the micrometer range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a demo!

• Thermo-fluid analysis

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for gear pumps, which other CAE software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, please see the actual mesh creation and movement in a demo presentation!!

• Thermo-fluid analysis

Fluid analysis software for positive displacement pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

Simerics MP+ is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow fields (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the micrometer range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery applications, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, we encourage you to see the actual mesh creation and movement through a demo presentation!!

• Thermo-fluid analysis

By utilizing the PumpLinx simulator for pump transient flow characteristics, smooth flow analysis within the internal gear pump can be conducted.

PumpLinx has mesh templates for various types of pumps. By using templates tailored to the specific pump type being analyzed, the time and effort typically spent on mesh generation for fluid analysis of standard pumps can be significantly reduced and streamlined. For example, even for complex mechanisms like internal gear pumps, optimal meshes for analysis can be quickly and automatically generated based on 3D CAD data by setting parameters such as the number of teeth. Additionally, the integrated GUI allows for smooth handling of operations such as mesh generation, setting analysis conditions, executing calculations, and displaying results all on one screen, making the analysis easier and faster. Furthermore, many volumetric pumps, including internal gear pumps, may experience cavitation during the operating cycle. PumpLinx supports cavitation analysis through the adoption of high-precision cavitation models and cavitation damage models.

• simulator
• Thermo-fluid analysis
• Contract Analysis

Fluid analysis software for positive displacement pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

SimericsMP+ is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the functionalities of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be published online. Especially, the actual mesh creation and motion should definitely be demonstrated in a demo!

• Thermo-fluid analysis

Simulating the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

SimericsMP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow fields (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the micrometer range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication. *There is a lot of information that cannot be posted online. Particularly, we encourage you to see the actual mesh creation and movement through a demonstration!

• Thermo-fluid analysis

Simulate the flow characteristics of volumetric pumps such as vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery applications, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and motion should definitely be demonstrated in a demo presentation!!

• Thermo-fluid analysis

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque Its greatest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should be demonstrated in a demo presentation!

• Thermo-fluid analysis

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow fields (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a demo!

• Thermo-fluid analysis

Introducing a simulation of an internal gear pump, which is an example of fluid analysis.

CFD provides detailed data that is difficult to obtain through experiments, helping to shorten product development periods and reduce prototyping costs. In this article, we will introduce application examples that can assist in product development using Simerics' CAE/CFD software. One common component used in hydraulic machinery, such as automotive oil pumps, is the internal gear. Research and development are continuously conducted to enhance the efficiency of transporting hydraulic oil. However, this requires significant time and costs for prototyping and testing the oil pump. Additionally, even when performing CFD simulations, generating the computational mesh for the gear teeth can be quite labor-intensive. With Simerics' CFD, high-performance template meshes are provided, and the deformation of the computational mesh that occurs during calculations is fully automated, allowing anyone to easily and quickly generate meshes. This is expected to lead to significant reductions in man-hours and costs! There are still many reasons to use Simerics' CFD software. You can find more information through the link below or feel free to contact us anytime!

• simulator
• Thermo-fluid analysis
• Contract Analysis

By utilizing the PumpLinx simulator for pump transient flow characteristics, smooth flow analysis within axial piston pumps can be conducted.

PumpLinx has mesh templates for various types of pumps. By using templates tailored to the specific pump type being analyzed, the time and effort typically spent on mesh generation for fluid analysis of standard pumps can be significantly reduced and streamlined. For example, even for complex mechanisms like axial piston pumps, optimal meshes for analysis can be quickly and automatically generated based on 3D CAD data by setting parameters such as the number of cylinders. Additionally, the integrated GUI allows for smooth handling of operations such as mesh generation, setting analysis conditions, executing calculations, and displaying results all on a single screen, making the analysis easier and faster. Moreover, in many volumetric pumps, including axial piston pumps, cavitation may occur during the operating cycle. PumpLinx supports cavitation analysis through the adoption of high-precision cavitation models and cavitation damage models.

• simulator
• Thermo-fluid analysis
• Contract Analysis

Introduction to airflow simulation in the engine room as a case study of flow analysis.

CFD provides a way to shorten product development time, reduce prototyping costs, and obtain detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. To prevent a car from overheating, it is necessary to intake air into the engine room and cool various components, making the design of the grille shape and ventilation parts crucial. Additionally, the grille not only serves a cooling function but also represents the car's "face," making it an important aspect of its appearance. Despite being such an important part, designing it requires significant time and costs for prototyping and experimentation. CFD simulations can also become large-scale, often leading to longer computation times; however, with Simerics' CFD, high-performance flow analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid results. It also models the complex engine room in detail, recreating conditions close to actual experiments. This can lead to significant reductions in labor and costs! There are many more reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Introducing a simulation of a check valve (non-return valve) as an example of fluid analysis.

CFD provides detailed data that is difficult to obtain through experiments, helping to shorten product development periods and reduce prototyping costs. In this article, we will introduce application examples that can assist in product development using Simerics' CAE/CFD software. Check valves (non-return valves) play an important role in preventing water hammer and regulating flow direction. Research and development are ongoing daily to enhance the durability of piping. However, this requires spending a lot of cost and time on prototyping and testing the valves. Even when performing CFD simulations, setting up the mesh deformation associated with the opening and closing of flow paths can be quite cumbersome. With Simerics' CFD, high-performance template meshes are provided, and the movement and deformation of the computational mesh that occurs during calculations are fully automated, allowing anyone to easily and quickly generate meshes. This is expected to significantly reduce labor and costs! There are still many reasons to use Simerics' CFD software. You can view more details through the link below or feel free to contact us anytime!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulating the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow fields (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in applications for oil pumps used in automobiles and construction machinery, with examples including vane pumps for power steering and CVTs, as well as trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, we encourage you to see the actual mesh creation and movement through a demonstration!

• Thermo-fluid analysis

Introduction to the simulation of floodway driving as a case study of free surface analysis.

In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. In particular, in Japan, there are many instances of flooding, and there are situations where we must drive on submerged roads. Creating vehicles that can withstand flooded road conditions has become one of the important challenges in automotive development, but this requires spending a lot of cost and time on prototype manufacturing and testing. CFD simulations tend to become large-scale and take a long time to compute, but with Simerics' CFD, high-performance free surface fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid results. The complex engine compartment is also modeled in detail, reproducing conditions close to actual experiments. Of course, changes in water depth and driving speed are also easily possible. From these calculation results, we can understand the pathways and amounts of water intrusion, providing feedback for shape design and preventing damage and electric shock. There are still many reasons to use Simerics' CFD software. You can find more details through the link below or feel free to contact us anytime!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulating the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

SimericsMP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a demo presentation!!

• Thermo-fluid analysis

Introducing a simulation of the water flow in a flush toilet, which is an example of a free surface.

In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. The water-flushing toilet that we commonly use involves various considerations in its design, not only regarding the cleaning power but also concerning water splashing and water conservation, even for something as simple as flushing water. To achieve this, it requires not only optimal shape ideas but also repeated trial and error regarding where and how much water to flow. However, doing so necessitates spending significant costs and time on toilet prototypes and experiments. With Simerics' CFD, high-performance free surface fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid results. It also enables highly detailed modeling, which can replicate conditions close to actual experiments. From these computational results, we can accurately understand the flow of water, leading to significant reductions in labor and costs! There are still many reasons to use Simerics' CFD software. You can find more details through the link below or feel free to contact us anytime!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow fields (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery applications, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see the actual mesh creation and movement through a demo presentation!!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulate the flow characteristics of valves and volumetric pumps! A CFD software specialized for valves and pumps, which other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various valves, pumps, and compressors. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the micrometer range, which is difficult for other general-purpose fluid analysis software!! In addition to valve analysis, there has been an increase in achievements for automotive and construction machinery oil pumps, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement through a demonstration!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

SimericsMP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a demo!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Easy setup with template and module usage! There are also cases where analysis time has been reduced to about one-third compared to conventional software.

This is a fluid simulation tool for calculating the transient characteristics of positive displacement pumps, compressors, and valves. It achieves high-precision fluid simulations by accurately solving the conservation laws of mass, momentum, energy, and chemical species. 【Features】 ◆ Automatic generation of computational meshes for rotational deformation, which is difficult with other software ◆ Analysis of characteristics such as flow rate, pressure pulsation, torque, aeration/cavitation, etc. ◆ Real-time display of calculation results and progress *There are cases where this has been adopted by Kyushu Institute of Technology, a national university corporation. For more details, please contact us or download the PDF to view.

• Other CAD
• Thermo-fluid analysis
• Contract Analysis

Simulate the flow characteristics of valves and volumetric pumps! A CFD software specialized in valves and pumps, which other CFD software struggles with!

SimericsMP+ is a fluid simulation tool designed to calculate the transient characteristics of various valves, volumetric pumps, and compressors. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances on the order of micrometers, which is difficult for other general-purpose fluid analysis software!! In addition to valve analysis, there has been an increase in achievements for automotive and construction machinery oil pumps, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, please see the actual mesh creation and movement in a demo presentation!!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulate the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Particularly, we encourage you to see the actual mesh creation and movement through a demo presentation!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Introducing a simulation of a check valve (non-return valve) as an example of fluid analysis.

CFD provides detailed data that is difficult to obtain through experiments, helping to shorten product development periods and reduce prototyping costs. In this article, we will introduce application examples that can assist in product development using Simerics' CAE/CFD software. Check valves (non-return valves) play an important role in preventing water hammer and regulating flow direction. Research and development are ongoing daily to enhance the durability of piping. However, this requires spending a lot of time and costs on prototyping and testing the valves. Even when performing CFD simulations, setting up mesh deformation due to the opening and closing of flow paths can be quite cumbersome. With Simerics' CFD, high-performance template meshes are provided, and the movement and deformation of the computational mesh that occurs during calculations are fully automated, allowing anyone to easily and quickly generate meshes. This is expected to significantly reduce man-hours and costs! There are still many reasons to use Simerics' CFD software. You can find more details through the link below or feel free to contact us anytime!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulate the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow fields (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery applications, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see a demo presentation for actual mesh creation and movement!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Introducing a simulation of a vortex pump (centrifugal pump), which is an example of fluid analysis.

CFD provides a way to shorten product development periods and reduce prototyping costs, as well as obtain detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. Centrifugal pumps, which utilize centrifugal force to draw up liquids, are widely used for water supply and irrigation, as well as for general industrial applications. An important challenge in the design process is that, due to the principle of expelling liquid with centrifugal force, cavitation tends to occur easily. Research and development are continuously conducted to suppress this and enhance pump efficiency and durability. However, this requires spending a lot of time and costs on prototyping and experimenting with centrifugal pumps. With Simerics' CFD, multiple cavitation models can be used, and erosion prediction is also possible, allowing for accurate and physically meaningful simulations! This is expected to significantly reduce labor and costs! There are still many reasons to use Simerics' CFD software. You can find more information through the link below or feel free to contact us anytime!

• simulator
• Thermo-fluid analysis
• Contract Analysis

An interview on fluid analysis of internal gear pumps using Pumplinx at Aisin Seiki Co., Ltd.

We have published an interview on how Aisin Seiki transitioned to PumpLinx and how it is being utilized. Please take a look.

• Thermo-fluid analysis
• Contract Analysis

Fluid analysis software for positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

PumpLinx is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vector, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in applications for automotive and construction machinery oil pumps, with examples such as vane pumps for power steering and CVTs, as well as trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement through a demo presentation!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulate the flow characteristics of volumetric pumps such as vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see a demo for the actual mesh creation and movement!!

• Thermo-fluid analysis

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, we encourage you to see the actual mesh creation and motion through a demonstration!

• Thermo-fluid analysis

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for gear pumps, which other CAE software struggles with!

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, as well as trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement through a demo presentation!!

• Thermo-fluid analysis

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for gear pumps, which other CAE software struggles with!

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication. *There is a lot of information that cannot be posted online. Particularly, the actual mesh creation and movement should definitely be demonstrated in a demo!

• Thermo-fluid analysis

Fluid analysis software for volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

PumpLinx is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement in a demonstration!

• Thermo-fluid analysis

Fluid analysis software for gear pumps, vane pumps, and other positive displacement pumps! CAE software specialized for pumps that other CAE software struggles with!

Simerics MP+ is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the micrometer range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with more examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a demo!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulating the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement through a demo presentation!!

• Thermo-fluid analysis

Simulate the flow characteristics of volumetric pumps such as vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in applications for oil pumps used in automobiles and construction machinery, with examples including vane pumps for power steering and CVTs, as well as trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, we encourage you to see the actual mesh creation and movement through a demo presentation!!

• Thermo-fluid analysis

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, with examples including vane pumps for power steering and CVTs, as well as trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement in a demo presentation!!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery applications, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a demo!

• Thermo-fluid analysis

Introducing a simulation of an internal gear pump, which is an example of fluid analysis.

CFD allows for the shortening of product development periods, reduction of prototype costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. One common component used in hydraulic machinery, such as automotive oil pumps, is the internal gear. Research and development is continuously conducted to enhance the efficiency of transporting hydraulic fluid. However, this requires significant time and cost for prototyping and testing the oil pump. Additionally, even when performing CFD simulations, generating the computational mesh for the gear teeth can be quite labor-intensive. With Simerics' CFD, high-performance template meshes are provided, and the deformation of the computational mesh that occurs during calculations is fully automated, allowing anyone to easily and quickly generate meshes. This is expected to significantly reduce labor and costs! There are many more reasons to use Simerics' CFD software. You can find more details through the link below, or feel free to contact us anytime!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Introducing a simulation of a check valve (non-return valve) as an example of fluid analysis.

CFD, which allows for the shortening of product development periods, reduction of prototype costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. Check valves (non-return valves) play an important role in preventing water hammer and regulating flow direction. Research and development are being conducted daily to enhance the durability of piping. However, this requires significant time and cost for prototyping and testing the valves. Additionally, even when performing CFD simulations, setting up the mesh deformation associated with the opening and closing of flow paths can be quite labor-intensive. With Simerics' CFD, high-performance template meshes are provided, and all the mesh deformation that occurs during computation is automated, allowing anyone to easily and quickly generate meshes. This is expected to significantly reduce labor and costs! There are many more reasons to use Simerics' CFD software. You can find more details through the link below or feel free to contact us anytime!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulate the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, please see a demo presentation for the actual mesh creation and movement!!

• Thermo-fluid analysis

Simulating the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in applications for automotive and construction machinery oil pumps, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement through a demo presentation!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be published online. Especially, please see a demonstration for the actual mesh creation and movement!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool for calculating the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement through a demonstration!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Introduction to the simulation of a two-axis screw compressor using SimericsMP+ and SCORG for thermal fluid analysis.

CFD allows for the shortening of product development periods, reduction of prototyping costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. The two-axis screw compressor has applications in refrigeration and air conditioning, including air conditioners and refrigerators. In the design process, a significant amount of cost and time must be spent on prototyping and experimentation. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid results. Additionally, the cooling lubricating oil is analyzed using the VOF method, recreating conditions close to actual experiments. This is expected to lead to significant reductions in man-hours and costs! There are still many reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Introduction to a fluid flow analysis simulation of a two-axis screw compressor using SimericsMP+ and SCORG, as a case study in thermal fluid analysis.

CFD allows for the shortening of product development periods, reduction of prototype costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. Two-axis screw compressors have applications in refrigeration and air conditioning, including air conditioners and refrigerators. In the design process, significant costs and time must be spent on prototyping and experiments. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid results. Additionally, the cooling lubricants are analyzed using the VOF method, recreating conditions close to actual experiments. This is expected to significantly reduce man-hours and costs! There are still many reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Introduction to a fluid analysis simulation of a two-axis screw compressor using SimericsMP+ and SCORG, as a case study in thermal fluid analysis.

CFD allows for the shortening of product development periods, reduction of prototype costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. Two-axis screw compressors have applications in refrigeration and air conditioning-related fields, including air conditioners and refrigerators. In the design process, significant costs and time must be spent on prototyping and experiments. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, yielding results easily and rapidly. Additionally, the cooling lubricants are analyzed using the VOF method, recreating conditions close to actual experiments. This is expected to lead to significant reductions in man-hours and costs! There are many more reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Introduction to a case study of flow analysis simulation of a two-axis screw pump using SimericsMP+ and SCORG for thermal fluid analysis.

CFD allows for the shortening of product development periods and the reduction of prototyping costs, as well as obtaining detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. The two-axis screw pump has applications in refrigeration and air conditioning, including air conditioners and refrigerators. In the design process, a significant amount of cost and time must be spent on prototyping and experiments. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid acquisition of results. Additionally, the cooling lubricants are analyzed using the VOF method, recreating conditions close to actual experiments. This is expected to significantly reduce man-hours and costs! There are many more reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Introduction to a simulation of a two-axis screw pump using SimericsMP+ and SCORG for thermal fluid analysis.

CFD allows for the shortening of product development periods, reduction of prototyping costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be beneficial for product development using Simerics' CAE/CFD software. The dual-axis screw pump has applications in refrigeration and air conditioning, including air conditioners and refrigerators. In the design process, a significant amount of cost and time must be spent on prototyping and experiments. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid results. Additionally, the cooling lubricants are analyzed using the VOF method, recreating conditions close to actual experiments. This is expected to significantly reduce man-hours and costs! There are many more reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Introduction to flow simulation of a two-axis screw compressor using SimericsMP+ and SCORG.

CFD allows for the shortening of product development periods, reduction of prototype costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. The two-axis screw compressor has applications in refrigeration and air conditioning, including air conditioners and refrigerators. In the design process, a significant amount of cost and time must be spent on prototyping and experiments. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid results. Additionally, the cooling lubricating oil is analyzed using the VOF method, recreating conditions close to actual experiments. This is expected to significantly reduce man-hours and costs! There are many more reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Introduction to a simulation of a two-axis screw pump using SimericsMP+ and SCORG for thermal fluid analysis.

CFD allows for the shortening of product development periods and the reduction of prototype costs, as well as obtaining detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. The two-axis screw pump has applications in refrigeration and air conditioning, including air conditioners and refrigerators. In the design process, a significant amount of cost and time must be spent on prototyping and experiments. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid results. Additionally, the cooling lubricants are analyzed using the VOF method, recreating conditions close to actual experiments. This is expected to significantly reduce man-hours and costs! There are many more reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Introduction to a case study of fluid analysis simulation of a two-axis screw compressor using SimericsMP+ and SCORG for thermal fluid analysis.

CFD provides a means to shorten product development periods, reduce prototyping costs, and obtain detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. Two-axis screw compressors have applications in refrigeration and air conditioning, including air conditioners and refrigerators. In the design process, a significant amount of cost and time must be spent on prototyping and experiments. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid results. Additionally, the cooling lubricant is analyzed using the VOF method, recreating conditions close to actual experiments. This is expected to lead to significant reductions in man-hours and costs! There are many more reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Introduction to the simulation of a two-axis screw compressor using SimericsMP+ and SCORG for thermal fluid analysis.

CFD allows for the shortening of product development periods, reduction of prototyping costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be beneficial for product development using Simerics' CAE/CFD software. The two-axis screw compressor has applications in refrigeration and air conditioning, including air conditioners and refrigerators. In the design process, a significant amount of cost and time must be spent on prototyping and experiments. With Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, yielding results easily and rapidly. Additionally, the cooling lubricants are analyzed using the VOF method, recreating conditions close to actual experiments. This is expected to significantly reduce man-hours and costs! There are many more reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• simulator
• Thermo-fluid analysis
• Contract Analysis

It offers ease of use and multifunctionality to meet a wide range of needs, from beginners to experts in CFD analysis.

Simerics MP+ is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see the actual mesh creation and movement through a demo presentation!!

• Thermo-fluid analysis

Instead of software experts, physics experts will handle the initial meeting and provide analysis results tailored to the customer's needs.

Our company offers contract analysis (commissioned analysis) and consulting as one of the pillars of our business. Based on the extensive know-how cultivated through contract analysis in CAE, we do not merely propose simple analyses using software; instead, we provide consultations for contract analysis (commissioned analysis) services by experts in physics.

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulate the flow characteristics of valves and volumetric pumps! A CFD software specialized in valves and pumps, which other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various valves, pumps, and compressors. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! In addition to valve analysis, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, please see the demo for actual mesh creation and movement!!

• simulator
• Thermo-fluid analysis
• Contract Analysis

It is possible to perform everything from mesh generation to analysis and post-processing in the same environment!

Simerics MP+ is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples including vane pumps for power steering and CVTs, as well as trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see a demo for the actual mesh creation and movement!!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Instead of software experts, physics experts will handle the initial meeting and provide analysis results tailored to the customer's needs.

Our company offers contract analysis (outsourced analysis) and consulting as one of the pillars of our business. Based on the extensive know-how gained from contract analysis in CAE, we do not simply propose basic analyses using software; instead, we provide consulting services for contract analysis (outsourced analysis) by physics experts.

• simulator
• Thermo-fluid analysis
• Contract Analysis

Instead of software experts, physics experts will handle the initial meeting and provide analysis results tailored to the customer's needs.

Our company offers contract analysis (commissioned analysis) and consulting as one of the pillars of our business. Based on the extensive know-how cultivated through contract analysis in CAE, we do not simply propose basic analyses using software; instead, we provide consultations for contract analysis (commissioned analysis) services conducted by experts in physics.

• simulator
• Thermo-fluid analysis
• Contract Analysis

Instead of software experts, physics experts will handle the initial meeting and provide analysis results tailored to the customer's needs.

Our company offers contract analysis (outsourced analysis) and consulting as one of the pillars of our business. Based on the extensive know-how cultivated through contract analysis in CAE, we do not simply propose basic analyses using software; instead, we provide consultations for contract analysis (outsourced analysis) services by experts in physics.

• simulator
• Thermo-fluid analysis
• Contract Analysis

Instead of software experts, physics experts will handle the initial meeting and provide analysis results tailored to the customer's needs.

Our company offers contract analysis (outsourced analysis) and consulting as one of the pillars of our business. Based on the extensive know-how cultivated through contract analysis in CAE, we provide not just simple analysis proposals using software, but also consultations for contract analysis (outsourced analysis) services by experts in physics.

• simulator
• Thermo-fluid analysis
• Contract Analysis

Instead of software experts, physics experts will handle the initial meeting and provide analysis results tailored to the customer's needs.

Our company offers contract analysis (outsourced analysis) and consulting as one of the pillars of our business. Based on the extensive know-how cultivated through contract analysis in CAE, we do not simply propose basic analyses using software; instead, we provide consultations for contract analysis (outsourced analysis) services by experts in physics.

• simulator
• Thermo-fluid analysis
• Contract Analysis

Instead of software experts, physics experts will handle the initial meeting and provide analysis results tailored to the customer's needs.

Our company offers contracted analysis (outsourced analysis) and consulting as one of the pillars of our business. Based on the extensive know-how cultivated primarily in thermal fluid analysis of pumps and valves, we provide not just simple analysis proposals using software, but also consultations for contracted analysis (outsourced analysis) services by physics experts.

• simulator
• Thermo-fluid analysis
• Contract Analysis

There is a proven record of reducing the model creation time from 1 month to 1 day! A CAD/CAE-related solution that is simple, convenient, easy to use, and also leads to cost reduction!

【Simerics MP for SOLIDWORKS】 Easily perform thermal fluid analysis on SolidWorks! With a built-in wizard, even beginners can easily conduct analyses! 【Simerics MP】 Simerics MP is a thermal fluid analysis software characterized by low cost, fast analysis, and easy, clean mesh generation! It has been gaining traction overseas, particularly among automotive-related companies, and is highly regarded in the academic field. 【Simerics MP+(PumpLinx)】 This is an advanced fluid analysis software that adds features for easily creating meshes for volumetric pumps and compressors, as well as the ability to analyze valves. It excels in analyses that other fluid analysis software may struggle with! 【CFturbo】 In addition to integration with the aforementioned Simerics products, there are numerous integration achievements with other well-known fluid analysis software! It is an essential software for the design and development of turbomachinery!

• Other CAD
• Thermo-fluid analysis
• Contract Analysis

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

On November 6th (Thursday) to 7th (Friday), 2025, we held the "Human Body Day 2025" at the NAC Image Technology Akasaka Multi-Purpose Space. We have uploaded videos of the highlights from each company and the presentations that took place on the day to our website. We encourage you to take a look. ---[Report on Human Body Day 2025 is here]------------------- https://info.nacinc.jp/jintaiday2025-report ------------------------------------------------------------------------- On the day of the event, participants were able to experience a wide range of products in a hands-on session format, including motion capture, force plates, eye tracking, and human body analysis software. We received numerous comments from attendees expressing high satisfaction, saying, "It was great to gain various information all at once," which makes us very happy. NAC Image Technology will continue to provide "valuable products to our customers." We hope you will join us for our next event as well.

Features: ● Equipped with Intel Core Ultra 7 255H/7 155H/5 225H/5 125H ● LPDDR5x 16GB/32GB/64GB onboard ● M.2 NVMe 256GB onboard ● USB 2.0 x 8, USB 3.2 (10Gbps) x 4 ● PCIe Gen 4 [x8] x 1, PCIe Gen 3 [x1] x 4, PCIe Gen 3 [x4] x 1 (2 lanes co-lay with SATA; BOM option) ● 2.5GbE x 2 ● COM-HPC Mini standard, size 95mm x 70mm ● Optional items ECB-980A: Development carrier board HPC-ARHm-FAN01: CPU fan HPC-ARHm-HSP01: Heat spreader (Note: heat dissipation is required in the enclosure)

Features: ● Equipped with Jetson AGX Orin 32GB/64GB ● Gigabit LAN ×1, 10Gigabit LAN ×1 ● USB 3.2 Gen 2 (Type-A) ×4 ● DB-9 connector ×1 (for DIO 8 channels) ● DB-9 connector ×2 (supports RS-232/422/485: Rx/Tx/RTS/CTS) ● Jetpack 6.0.0 pre-installed