The FireStealthFS810bN is the world's first IEEE-1394b analyzer equipped with a "stealth mode."

The FireStealthFS810bN is the world's first IEEE-1394b analyzer equipped with a "stealth mode."

DapTechnology's FireStealth810bN is the world's first "stealth mode" IEEE-1394b analyzer equipped with non-intrusive bus monitoring technology. The FireStealth IEEE-1394b analyzer does not participate in the bus topology, so topology reconfiguration and node ID reassignment do not occur. It becomes invisible to all other devices on the bus and does not participate in bus management activities such as root contention, cycle start generation, and transmission arbitration. FireStealth is a compact device equipped with 1024MB of internal memory. This device provides extensive hardware filtering and triggering through efficient FPGA and onboard processors. It supports transfer rates of up to 800MB. FireStealth connects to a host PC via USB2.0 or Ethernet. The GUI software operates on Windows and is intuitively operable. Additionally, the included API allows for the development of custom control software using C/C++ or LabVIEW.

• Other network tools

Analyzer package for the AS5643 avionics data bus adopted in the F-35 project.

The AS5643 I/F board comes in USB, LAN, and PCI/cPCI types. The AS5643 supports speeds of 100/200/400/800 bps. The bus analysis analyzer software FireSpy Mil1394 provides functions for Monitor, Recorder, Commander, Generator, Filter/Trigger, and Scriptor. ■ Japanese technical documentation for the AS5643 is available. If you would like to see it, please contact sales@nacelle.co.jp. Alternatively, it can also be downloaded from the catalog page.

• Other network tools

The FireDiagnostics suite is analyzer software used in combination with the FireSpy analyzer.

The FireDiagnostics Suite is software used in conjunction with Dap Technology's FireSpy. This software integrates 1394 analysis, simulation, and interface tools for a wide range of applications. In addition to hardware-assisted analyzer tools such as monitors, recorders, generators, commanders, scriptwriters, and Mil1394 signal monitors, this suite also provides a set of software tools designed to integrate FireSpy products into various test applications. The FireDiagnostics Suite is created through an application programming interface (API), and applications for the FireSpy analyzer equipped with interfaces for development environments such as C/C++ and LabVIEW TM on Microsoft Windows OS are highly flexible. By using the API library, you can control all hardware-assisted analyzer tools such as recorders and generators, as well as lower-level 1394 bus functions.

• others

Presentation of a Japanese explanatory book on the avionics data bus AS5643 (Mil1394) communication standard.

Free gift of a Japanese explanatory document on the AS5643 (Mil1394) communication standard for avionics data buses used in new defense aircraft such as the F-35! The document spans 52 pages and provides a detailed explanation of the AS5643 protocol, which has developed based on IEEE1394, along with illustrations.

• Other network tools

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

A "non-contact switch" that allows you to open and close doors simply by waving your hand, without directly touching the doorknob or switch! By adopting microwave technology, the risk of malfunction due to condensation in environments with temperature differences, such as cold storage warehouses, is significantly reduced. It reduces the risk of virus and bacterial infections in places where hygiene is a concern, such as food factories, hospitals, nursing facilities, and restaurant kitchens. 【Features】 ○ Reduces the risk of virus infection by allowing door operation without contact ○ Waterproof and dustproof (IP55 design), allowing the main unit to be washed with water (note: the wall surface (back side) is not applicable) ○ LED display and response sound allow for easy confirmation of detection status ○ Two pattern settings for one-shot and latch output are possible ○ The thinnest in the industry! Only 22mm thick! ◎ For more details, please download the catalog or contact us.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.