An article about the 'CUT' Asia Design Award win was published in the Saitama Shimbun.

An article has been published about winning the highly recognized "2020 Asia Design Award," a global design award!

Our company, which manufactures and sells picture frames, has won this year's "Asia Design Award," a globally recognized design award, for our ALUMIUM series 'CUT.' The feature of 'CUT' is that it is cut at a 45-degree angle from the outside towards the inside. It gives a thinner and sharper impression than its actual size, and depending on the viewing angle, the sides may become invisible. This creates a light and floating impression as if it is suspended from the wall. Additionally, when light hits the cut inner surface, it not only illuminates the surrounding area of the artwork but also creates a sense of tension. *For more details, please refer to the PDF document or feel free to contact us.

• others

A new aluminum frame that won the Good Design Award 2019! It has a light impression that seems to float from the wall, making it suitable for interiors in hotels and commercial facilities.

"CUT" is a frame and panel that has its edges trimmed, giving it a sharp impression. When viewed from the front, it allows you to focus on the artwork without being overly aware of the frame, and when viewed from an angle, the beveled sides create a light impression as if it is floating away from the wall. Despite its slim profile, it can accommodate works up to 5mm thick, making it suitable for various artworks such as photographs, posters, and contemporary art. It also serves as an elegant interior frame for hotels, museums, and commercial facilities. 【Features】 ■ Available in large sizes of A1 and above ■ Creates a sense of luxury with the texture of aluminum ■ Accommodates works up to 5mm thick despite its slim design ■ Winner of the Good Design Award in 2019 ■ UV acrylic used for all sizes *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies
• others

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Features: ● Equipped with Intel Core Ultra 7 255H/7 155H/5 225H/5 125H ● LPDDR5x 16GB/32GB/64GB onboard ● M.2 NVMe 256GB onboard ● USB 2.0 x 8, USB 3.2 (10Gbps) x 4 ● PCIe Gen 4 [x8] x 1, PCIe Gen 3 [x1] x 4, PCIe Gen 3 [x4] x 1 (2 lanes co-lay with SATA; BOM option) ● 2.5GbE x 2 ● COM-HPC Mini standard, size 95mm x 70mm ● Optional items ECB-980A: Development carrier board HPC-ARHm-FAN01: CPU fan HPC-ARHm-HSP01: Heat spreader (Note: heat dissipation is required in the enclosure)

Features: ● Equipped with Jetson AGX Orin 32GB/64GB ● Gigabit LAN ×1, 10Gigabit LAN ×1 ● USB 3.2 Gen 2 (Type-A) ×4 ● DB-9 connector ×1 (for DIO 8 channels) ● DB-9 connector ×2 (supports RS-232/422/485: Rx/Tx/RTS/CTS) ● Jetpack 6.0.0 pre-installed

Features: ● Equipped with Intel Atom x7835RE/x7433RE ● LPDDR5x 8GB/16GB onboard ● eMMC 32GB/64GB onboard ● LVDS x 1, DDI x 1 ● USB 2.0 x 8, USB 3.2 Gen 2 x 2 ● PCIe x1 x 4 ● COMe Type 10 standard, 84mm x 55mm size ● Operating temperature -40 to 85℃ ● Optional items ECB-920A-0001: Development carrier board NANOCOM-ADN-FAN01: CPU fan NANOCOM-ADN-HSP01: Heat spreader (※ Heat dissipation is required in the enclosure)