All processes from identity verification to hand disinfection and automatic door opening and closing are contactless! Infection control with the "Contactless Entry and Exit System"! Strengthening security for apartments, offices, and more!

It is hygienic because you can open and close the door just by waving your hand without directly touching the doorknob or switch! Avoid the risk of infection from viruses and bacteria!

The "Microwave Non-Contact Switch for Automatic Doors DHS-1" is a microwave hand-sensing sensor that allows you to open and close doors simply by waving your hand. It is suitable for hygienic environments such as food factories, hospitals, and nursing facilities. 【Features】 - Reduces the risk of virus infection by allowing door operation without contact. - The adoption of microwave technology significantly reduces malfunction due to condensation in environments with temperature differences, such as cold storage. - Waterproof and dustproof (IP55 design), allowing the main unit to be washed with water (note: the wall surface (back side) is not applicable). - LED display and response sound allow for easy confirmation of detection status at a glance. For more details, please download the catalog or contact us.

• Sensors
• Safety Door Switch

Deep learning high-speed facial recognition! Facial recognition speed under 0.2 seconds, facial recognition accuracy over 99%!

The "DS Series" is a high-speed facial recognition device that achieves faster facial recognition with high accuracy. Facial recognition speed is under 0.2 seconds, with an accuracy of over 99%! It can be used in various locations such as medical facilities, public facilities, environmental facilities, educational institutions, and office buildings, reducing the risk of virus and bacteria transmission as an entry and exit system. You can choose from three types according to your location and application. ■ Product Lineup 【Facial Recognition Terminal DS342】 - High-speed facial recognition with deep learning - Compact smartphone size - Supports mask recognition 【Facial Recognition Terminal (Felica compatible) DS372F】 - High-speed facial recognition with deep learning! Equipped with a Felica card reader - 7-inch tablet size ◎ For more details, please download the catalog or contact us.

• Surveillance Cameras
• Other safety equipment
• Entrance and exit control system

Just by holding your hand over the sensor, the solution is automatically sprayed. By linking with automatic doors, thorough hand disinfection is achieved!

The "PHW-03B" is an automatic liquid spray dispenser that detects when a hand is extended and sprays disinfectant. When combined with a wireless touch switch, it can wirelessly link with automatic doors. When the liquid is sprayed, a signal is transmitted to open the automatic door, ensuring thorough hand disinfection. 【Features】 ● The number of sprays can be selected to either one or two. ● Compatible bottle size: up to approximately D85×W95×H185–250mm. You can use your own bottles in addition to the dedicated ones. ● Recommended for entrances to restrooms in food-related facilities and factories where hygiene management is required. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other safety and hygiene products

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

This time, the ACS-5000 is available as a facial recognition terminal compatible with FaceMe Security's add-on feature "Face Terminal," enabling access control management that combines "advanced anti-spoofing features" with high-speed facial recognition powered by edge AI. ■ Main Features 1. Accelerated Authentication Processing FaceMe Security is optimized for the MediaTek Genio 700's NPU, achieving faster facial recognition processing and reduced CPU load compared to processing solely on the CPU. It ensures stable authentication without delays even during peak times such as clocking in and out, contributing to alleviating congestion. 2. Advanced "Anti-Spoofing" Optimized for the IR + RGB camera mounted on the ACS-5000, it can quickly detect fraudulent authentication using photos, videos, or 3D masks within 0.6 seconds, ensuring reliable identity verification. 3. Door Control Without Additional Equipment FaceMe Security can directly control the digital I/O of the ACS-5000, allowing for the construction of an access control management system without the need for additional equipment. This simplifies system configuration and reduces implementation costs.

This is an air leak tester for battery cases of electric vehicles (EVs). The battery case has the characteristic of being "large with a significant internal volume, and its structure may deform due to internal pressure." As a result, air leak testing generates "noise caused by its large size and capacity" and "noise caused by expansion or deformation due to internal pressurization." To mitigate this noise, this device features a newly developed smoothing function and a linear fitting correction function used in combination during measurement. Additionally, to achieve low-pressure control that is difficult to manage and to expand flow for large volumes, we provide a bypass box (CBU-600) equipped with an electro-pneumatic regulator for precise pressure control and a pressurization valve with a large effective diameter to supply high flow rates. Measurement methods: Work-Work comparison, Work-Master comparison, Fixed Master comparison Measurement pressure range: 10 kPa, 20 kPa, 50 kPa (depending on specifications) Gauge pressure sensor accuracy: ±2% F.S. Differential pressure sensor accuracy: ±0.5% F.S. Group settings: 0 to 31 groups Power supply voltage / Power consumption: AC100 to 240 V / 100 VA