We will be exhibiting at the Measurement and Measurement Exhibition "INTER MEASURE" 2021.

A dustproof and waterproof near-infrared moisture meter that meets protection level IP66. Suitable for a wide range of production lines, including food and paper, where high standards of quality control are required!

The "Near Infrared Moisture Meter KB-30" is a device that measures moisture by irradiating light onto the target object. The light used for irradiation is near-infrared light, which has a high correlation with moisture content, allowing for accurate real-time moisture measurement. Additionally, near-infrared light generates very little heat and does not alter the physical properties of the target object, making it ideal for integration into production lines to continuously monitor moisture changes in a non-destructive and non-contact manner. It can provide a current output of 4-20mA according to the measurement range. The housing is made of unpainted stainless steel, preventing accidents that could result in peeling paint or rust contaminating the production line. Furthermore, it is equipped with dust and water resistance measures, conforming to the IP66 standard. This moisture meter is suitable for a wide range of production lines, including food and paper, where high standards of quality control are required. 【Features】 ■ Economical model of inline near-infrared moisture meter ■ Real-time moisture measurement on the production line ■ Waterproof and dustproof protection grade IP66 compliant ■ Unpainted, preventing rust and paint peeling contamination on the line *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments
• Other inspection equipment and devices
• Analytical Equipment and Devices

High functionality at a low price. Measurement of 4 components in just a few seconds. The sample container offers high flexibility, and measurements can be taken without any pretreatment.

The near-infrared component analyzer "KB-270" is a product designed for those who hesitate to adopt NIR technology due to concerns that component analyzers are "over-specified and expensive." It achieves a good balance of specifications while maintaining an affordable price. It accommodates a wide range of samples including agricultural products, food ingredients, processed goods, pharmaceuticals, paper, and minerals, and can perform high-precision measurements in just a few seconds, regardless of the shape, from powders to pastes. In addition to not requiring sample pretreatment, it can measure even small amounts of samples. Furthermore, it allows for high-efficiency work as measurements can be taken directly on a sample or using glass petri dishes of any size. 【Features】 ■ Simultaneous measurement of up to 4 components in seconds ■ High flexibility in sample containers ■ Accumulation of data allows for tracking component variations daily and seasonally ■ Easy creation of calibration curves using PLS calculations with the included software ■ Optional masking holder enables measurement of precious small samples *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other measurement, recording and measuring instruments
• others

In petri dishes, in plastic bags, in bottles, or placed directly. Simplifying the entire measurement process with various sampling methods and non-destructive measurements!

Are you facing the following challenges with moisture content measurement? - Measuring 50 samples a day takes over 8 hours, even if each sample takes 10 minutes... - Due to hygroscopicity and storage concerns, I don't want to take samples out of bags or vials... - I want to avoid destructive testing since I need to confirm moisture before moving on to the next test or process... The near-infrared moisture meter KB-230 not only shortens measurement time but also eliminates the need for preparatory and cleanup tasks. *Creating a calibration curve is a prerequisite. ■－－Various Measurement Targets－－■ It can measure all kinds of substances, including agricultural products, food ingredients, processed goods, pharmaceuticals, paper, and minerals. It is also suitable for powders, pastes, and other types and characteristics. *Creating a calibration curve is a measurement condition. *For inquiries about measurement feasibility and results, please contact us.

• Other measurement, recording and measuring instruments

Equipped with a non-contact thermometer that measures the direct sample temperature. Adopted as a moisture meter in quality control departments and inspection departments that require advanced moisture management.

The "Infrared Moisture Meter FD-800" is positioned as the pinnacle model in the infrared moisture meter series by Kett Scientific. It adopts a groundbreaking dual temperature sensor method to achieve high-precision moisture measurement. It is positioned as a moisture meter for quality control departments and inspection departments that require advanced moisture management, supporting high-precision moisture control. 【Features】 ■ The top model of infrared moisture meters ■ Minimum moisture display of 0.01%, mass display of 1mg ■ Dual temperature control that also monitors the temperature on the plate ■ Measurement time significantly shortened compared to other models from our company *For more details, please download the PDF or feel free to contact us.

• Food Testing/Analysis/Measuring Equipment
• Image Processing Equipment

Standard yet multifunctional and highly accurate! For quality control departments and inspection departments that require advanced moisture management. Capable of displaying with high precision of 0.01%.

The "Infrared Moisture Meter FD-720" can switch between high precision of 0.01% and the standard 0.1% for moisture display. Additionally, it adopts a "Rapid Drying Mode" through drying control software, allowing moisture values to be obtained with short measurement times, significantly reducing measurement time depending on the target being measured. This device is positioned as a moisture meter for quality control and inspection departments that require advanced moisture management, and it can be used for high-precision moisture management. 【Features】 ■ Mid-range model of infrared moisture meters ■ Minimum moisture display of 0.01%, mass display of 1mg ■ Utilizes efficient infrared quartz heaters for drying ■ 6 types of measurement modes *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments
• Analytical Equipment and Devices

A heater that emits more than twice the infrared radiation of conventional products achieves improved drying efficiency! Equipped with two measurement modes: "Automatic Stop Mode" and "Time Stop Mode."

The infrared moisture meter FD-660 is an infrared moisture meter that closely resembles the official standard measurement method for moisture measurement, the "loss on drying method," as well as the heating drying and mass measurement method. It can measure the moisture content of almost all samples, regardless of type or characteristics! Despite its compact appearance, the auto tare mechanism, which reduces the influence of balance drift, inherits the same functionality as conventional devices and has significantly revamped the operation section. *Demo units are available for free rental! 【Features】 ■ Equipped with "Organic Carbon Heater" → It emits more than twice the infrared radiation compared to the heat sources used in other infrared moisture meters, enabling efficient drying. Additionally, being organic, it is an ecological heat source that does not contain compounds or metals that pollute the environment. ■ Two types of measurement modes: "Automatic Stop Mode" and "Time Stop Mode" ■ Built-in high-performance electronic balance with an "auto tare mechanism" that allows zero point adjustment during measurement ■ Large stainless steel sample tray with a diameter of 110 mm Samples that pose a risk of explosion, ignition, or the generation of harmful substances due to heating cannot be measured. *For more details, please download the catalog or feel free to contact us.

• Food Testing/Analysis/Measuring Equipment
• Testing Equipment and Devices
• Analytical Equipment and Devices

We offer a lineup of several types with different measurement principles! Please use this for selecting products!

This catalog is a comprehensive catalog of measuring instruments related to painting and plating handled by Kett Scientific Research Institute. Proper management of the thickness of surface treatments (painting and plating) is very important from the perspectives of rust corrosion, product value, and processing costs, and the measuring instrument that supports this is the thickness gauge. We offer several types of instruments with different measurement principles based on the combination of the base metal and the coating being measured. Please use this to help you choose the appropriate type. [Contents (excerpt)] ■ Measurement principles of electromagnetic thickness gauges ■ Measurement principles of eddy current thickness gauges ■ Substrates and coatings that can be measured by measurement method ■ List of thickness gauges ■ List of standard plates for accessories and options *For more details, please refer to the PDF document or feel free to contact us.

• Coating thickness gauge
• Other measurement, recording and measuring instruments

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will introduce a number of products, including our new product, the Pillow Packaging Full Air Tightness Inspection Machine MSQ-2003. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to visit us at this opportunity. 【 Exhibition Name 】 JAPAN PACK 2025 Japan Packaging Industry Exhibition https://www.japanpack.jp/ 【 Dates 】 October 7 (Tuesday) to October 10 (Friday), 2025 *4 days 10:00 AM to 5:00 PM 【 Venue / Booth Number 】 Tokyo Big Sight / East Hall 8, Booth 8-505

More and more companies are trying to address the increasingly serious shortage of human resources through employee development. However, there are some concerns regarding effective training... ✓ We want to improve the skills of new and existing employees. ✓ There are no instructors or training know-how within the company. ✓ The cost of training is high and does not reach all employees. To address these concerns, "Human Resource Development Professionals, PC Assist Co., Ltd." and "Subsidy Professionals, Social Insurance Labor Consultant Corporation Management Center" will respond! We will thoroughly explain ways to secure human resources while keeping costs down. Please feel free to join us.

When conducting structural analysis of organic compounds, IR, NMR, and MS can be considered the three sacred treasures. If the analysis is performed correctly, it is possible to elucidate the structure of even quite complex compounds. However, actual spectra are often not of a single compound, as seen in textbooks, which can lead to significant challenges in interpreting results for beginners in analysis. Additionally, while database searches are a useful tool in structural analysis, the ability to read spectra is necessary to select the correct structure from among the candidates, not just pattern matching. In this course, we will lecture on the basic ways to interpret IR, NMR, and MS spectra, including simple explanations of principles, points to be aware of during analysis, and how to proceed with actual analysis, incorporating some exercises as well.

◆Mechatrotech Japan 2025 —◆ Troax Safety Systems Co., Ltd. will be exhibiting at "Mechatrotech Japan 2025." ■ When it comes to steel safety fences, think "TROAX" - We will showcase steel safety fences used around robots, equipment, and conveyor lines. ■ The safety guard "FlexGuard" absorbs impact with flexible materials and boasts excellent durability - This safety guard ensures the safety of workers in environments where people and "machines/vehicles" interact, such as manufacturing sites, truck areas, and packing areas. At our booth, our staff will be available to answer various questions and address challenges related to products and safety measures on-site. We sincerely look forward to your visit.

Luminex Japan Co., Ltd. will exhibit at the 33rd Annual Meeting of the Japanese Society for Organ Transplantation, held at Nagasaki University from October 3 (Friday) to October 5 (Sunday). Please feel free to consult us at our booth regarding any questions about Luminex systems. We would also love to hear your feedback and requests!