★New Virus Prevention★ High-Spec Hypochlorous Acid Water Generator [KHM-1] Automatic Dispenser Now Available for Sale!

120ppm high concentration compatible" "Generates 6 liters per minute" "Low running cost" "Super compact" "No installation required" "Subsidy available" "Leasing OK

Hypochlorous acid water can inactivate viruses such as the novel coronavirus, norovirus, and influenza, and is harmless to the human body, making it suitable for disinfecting and deodorizing food, cooking utensils, hands, baby products, and pet supplies. The "KHM-1" is a high-spec device that can generate 6 liters of hypochlorous acid water per minute, yet its compact size of approximately 20 cm in width makes it ideal for childcare facilities, elderly care facilities, restaurants, and offices. It requires no installation work, allowing anyone to easily set it up. It can generate a high concentration (120 ppm) of hypochlorous acid water that other products cannot produce. (Three levels of concentration switching) Please compare its specifications and running costs with those of other companies. "The reason it is the most chosen is right there!" 【Features】 ■ High concentration generation of 120 ppm ■ Large flow rate generation of 6 liters/min ■ Gentle on the skin due to a neutral pH range of 6.0 to 6.5 ■ Compact size with a width of 222 mm ■ Safe and secure carbon dioxide method ■ Built-in chemical tank and gas cylinder ■ Easy operation without the need for dedicated staff ■ No installation work required ■ Reliable Japanese manufacturing

• Other cleaning machines
• Prototype Services
• Other office supplies

A battery-operated spray gun that can disinfect various places such as waiting chairs and inside vehicles, making it convenient to carry around!

The "HSG-B8001" is equipped for use with hypochlorous acid water and can spray hypochlorous acid water electrically. Using a manual spray gun makes it very difficult to disinfect various places inside a building as it can be tiring for the hands. This product is battery-operated, making it convenient to carry, and allows for easy disinfection of the entire building. 【Features】 ■ Can spray hypochlorous acid water generated by the "KHM-1" ■ Designed to be compatible with chlorine ■ Battery-operated for easy portability ■ Can spray in various places that need disinfection *For more details, please refer to the PDF document or feel free to contact us.

• spray
• Other safety and hygiene products

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, and management: Are you facing any issues with the challenges you currently have or selecting the right sensors for parking lot management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Basic Guide to Vehicle Detection Sensors This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document introduces the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

[To the owners of parking lots and parking lot construction companies] "I'm worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those facing sidewalks or roadways are particularly prone to dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surroundings with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Vehicle Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In facilities operating nurse call systems, we have made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.