Sanwa Enterprise for pneumatic equipment. Starting remote business negotiations.

A compact spot cooler that generates ultra-low temperature air with a maximum temperature difference of -75°C just by connecting compressed air.

The Kolder is a simplified spot cooler that applies the principle of vortex. Without using a power supply or refrigerant gas, it discharges ultra-low temperature air with a maximum temperature difference of -75°C (at a supply pressure of 0.7 MPa, in the case of model 190-75SV) simply by connecting compressed air. A typical application of the generated cooling air is the removal of heat generated during the processing of materials such as metals and plastics, and it demonstrates excellent effectiveness, especially in the processing of hard materials and high-viscosity substances (such as titanium alloys, stainless steel, nickel alloys, and thermoplastic plastics). Additionally, the cooling effect on workpieces and tools leads to improved cutting speeds and extended tool life, making it particularly suitable for dry cutting of magnesium alloys. Furthermore, it is effectively utilized as a cooling source for various spot cooling applications, including preventing heat-related issues in electrical control boxes and various measuring instrument boxes, cooling molds, and cooling tests for semiconductors and PC boards. *For more details, please refer to the basic information and downloadable materials at the bottom of the page.

• Pneumatic Equipment

It was manufactured for the purpose of air transportation using compressed air. During operation, it does not require a power supply, making it suitable for use in explosive environments.

The conveyor back is a device that enables air transport through a powerful vacuum pressure generated by compressed air as the power source. It has no moving parts and does not require a power supply, making it effective in environments where explosion-proof measures are required, as well as for the transport and exhaust of gas and mist.

• Pneumatic Equipment

No power supply needed. This is a cabinet cooling (heat dissipation) dedicated spot cooler that operates solely on compressed air.

The "cabinet cooler" reduces overheating inside NC or CNC cabinets, electrical control panels, motor boxes, surveillance cameras, various measuring instruments, etc., protecting precision machinery and measuring instruments from malfunction or damage due to overheating. Additionally, the automatic exhaust mechanism of the cabinet cooler keeps the inside of the cabinet in a pressurized state with cooling air at all times, preventing the intrusion of dust and mist from outside the cabinet and protecting electronic devices from contamination. By using a thermostat and solenoid valve, it is possible to regulate the temperature inside the box and reduce the amount of compressed air consumed.

• Other environmental equipment

Suction and blow, two functions in one device. It is a tool that enables powerful vacuuming and blowing.

The air amplification air blow nozzle "Round Blow" uses compressed air as its power source, sucking in a large amount of surrounding air and expelling it. The "Round Blow" can be used in two roles: as a vacuum system or as a powerful air blow device.

• nozzle

The Coanda effect generates a thin, uniform curtain-like laminar flow. Its applications are diverse, including drainage, drying, heat dissipation blowing, and cooling.

The "Line Blow" is an air tool that generates a uniform curtain-like airflow simply by connecting compressed air. It is available in a lineup ranging from 150mm to 900mm in width, depending on the usage conditions for tasks such as draining, drying, and blowing away. ◆ Are you having trouble selecting piping components? ◆ >>> Product selection is available at the Satellite Showroom <<< In April 2018, we opened a Satellite Showroom in Odaiba displaying approximately 2,500 items as a new initiative to improve customer satisfaction in industrial piping components. [See]・[Touch]・[Sit]・[Choose] Our specialized staff will assist you in product selection. Please feel free to contact us. For those coming by train: Get off at Yurikamome "Telecom Center" Station and walk about 2 minutes. 【Contact Information】 TEL: 048-871-0501 Satellite Showroom Weekdays: Monday to Friday 10:00 AM to 5:00 PM

• Hydraulic Equipment

This is a tool designed for blowing around pipes and cables. The air flow that blows out evenly at 360° enables drainage, cleaning, and drying.

The cylindrical airflow generator "Circle Blow" is an air nozzle that emits a cylindrical stream of air at high speed from a thin slit, attracting and amplifying a large amount of surrounding air to create a powerful annular amplification flow. The amplified flow, which blows evenly and uniformly in 360°, is effective for draining, cleaning, drying, and cooling long products such as pipes, cables, and extrusion rods. The hole diameter ranges from 25mm to 180mm.

• Pneumatic Equipment

It is small enough to fit in the palm of your hand, yet capable of powerful vacuuming and blowing.

The jet blower is a palm-sized air volume amplifier that generates a powerful vacuum pressure by blowing compressed air from slits provided along the inner wall of the main body, attracting a large amount of surrounding air from one side while expelling a large volume of amplified air from the other side. With a duct hose, it can be used for dust collection and recovery of debris, smoke, and particulate or fibrous materials, as well as for pneumatic conveying. Without a duct hose, it can be used for draining water after cleaning products or parts, as well as for drying, cooling, and blowing away cutting chips and debris.

• Pneumatic Equipment

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

***Contract Processing Now Accepting Orders*** We can accommodate small lots and a variety of sample tests, including spray drying with organic solvents. Please feel free to contact us. ----Example of a Prototype Schedule---- 9:30 Pre-test Meeting 10:00 Spray Drying Test Starts 12:00 Lunch Break 13:00 Spray Drying Test Resumes 16:00 Post-test Meeting

【Period: Ongoing until May 31, 2026】 Now 20% OFF! For orders of 10 or more: Dry T-shirts @ 1,600 yen (tax included) Dry polo shirts @ 2,000 yen (tax included) (Price includes the garment and one print location) * For sizes 3L and above, an additional 550 yen * An additional 550 yen for each additional print location Design and data production fees are required separately. (No fee for complete data submission) We accept orders for various purposes such as events, teams, goods, souvenirs, and gifts, from one piece to mass production. We also have many other garments not listed. Please feel free to inquire.

We have announced the "piCOBOT Electric (Standard I/O)," an electric vacuum gripper compatible with most collaborative robot brands. It enables clean and energy-efficient automation without the need for compressed air, simplifying equipment configuration while improving energy efficiency. It supports various collaborative robot brands, allowing for flexible automation. With a universal Standard I/O interface, smooth integration with major collaborative robots is possible. Additionally, its lightweight and compact design maximizes the robot's portability. By combining it with various suction cups and accessories from Piab, you can build a flexible handling system that accommodates diverse workpieces. Read the article here: https://www.piab.com/ja-jp/news/piab-launches-picobot-electric--all-electric-vacuum-gripping-for-any-cobot-brand

This column is a special series consisting of 12 installments themed around user manuals. In the first installment, we will focus on the often-overlooked "risks of postponing the user manual" in relation to CE marking compliance. In the process of obtaining CE marking, attention is often concentrated on design and safety measures, leading to cases where the preparation of the user manual is delayed. However, in practice, deficiencies in the user manual can lead to the following issues: - Rejection just before the review - Increased costs due to design revisions - Schedule delays - Product liability (PL liability) risks after shipment Even if CE marking is obtained, it is important to be aware that insufficient information provision can leave risks associated with the product.