Announcement of the addition of the Jupiter (general-purpose CAE software) product page.

Mesh creation/analysis for a 1,000-part, 100 million node model is possible with one push! There are over 300 users from a major manufacturer.

Jupiter is a CAE software based on a pre-solver and post-processor for finite element method (FEM) analysis. It excels in handling large-scale models with over 100 million nodes and significantly reduces labor through automation, making it widely usable from beginners to CAE professionals. It is a domestically developed software that has been in continuous development since 2002. We provide thorough support and customization unique to the developer. For features and case studies, please refer to the product page linked above. Feel free to contact us with any questions, no matter how trivial.

• Stress Analysis
• Thermo-fluid analysis
• Contract Analysis

Features ● PICO-ITX standard ● Equipped with Intel Core Ultra 7 255U / Ultra 5 225U ● 16/32GB onboard memory ● 2.5GbE + 1GbE ● HDMI 1.4 + eDP 1.4 ● M.2 2280 M-Key x 1 (PCIe 4.0 [x4]/SATA) ● M.2 2230 E-Key x 1 (PCIe 4.0 [x1] + USB 2.0) ● USB 3.2 Gen 2 x 2 + USB 2.0 x 2 ● RS-232/422/485 x 2 ● TPM, GPIO 4-bit, SATA 6Gb/s x 1 ● SMBus/I2C (Default: SMBus) ● Intel AMT Support * This model does not include storage or OS.

Features: ● PICO-ITX standard ● Equipped with Intel Atom x7433RE/x7835RE ● DDR5 4800MHz×1 (up to 16GB) (sold separately) ● HDMI 1.4×1, eDP 1.4b/LVDS×1 ● 2.5GbE×1, GbE×1 ● Full-Size mSATA, M.2 2230 E-key x1 ● USB 3.2 Gen2[x1]×2, USB 2.0×4 ● RS-232/422/485×2, RS-232×2 ● TPM 2.0, SATA 6.0Gbps×1, GPIO 4-bit, SMBUS/I2C×1 * This is a model without an operating system.

Features: ● Equipped with Intel Processor N150 / Intel Core 3 Processor N355 ● DDR5 4800MHz SODIMM ×1 (supports up to 16GB) (sold separately) ● HDMI 1.4 ×1, eDP 1.4b / LVDS ×1 ● Intel Ethernet Controller I226 (2.5GbE RJ-45 ×1), Realtek RTL8111H (1GbE RJ-45 ×1) ● Full-size mSATA / mPCIe ×1, M.2 2230 E-Key ×1 ● USB 3.2 Gen2[x1] ×2, USB 2.0 ×4 ● RS-232/422/485 ×2, RS-232 ×2 ● TPM 2.0, SATA 6Gb/s ×1, 4-bit GPIO, SMBus / I2C ×1 ● Fan-equipped heat sink available separately PICO-ASL4-FAN01: Heat sink with fan PICO-ASL4-HSK01: Heat sink PICO-ASL4-HSP01: Heat spreader (Note: heat dissipation is required in the enclosure) * This is a model without an operating system.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.