We have published a collection of case studies on filter presses (dewatering machines)!

It is a highly rated model that balances functionality and cost.

The labor-intensive parts have been automated as much as possible, while the simpler tasks have been done manually to reduce costs. The moisture content of the dehydrated cake is very low, allowing for efficient solid-liquid separation. We offer a variety of sizes from small to large, enabling selection according to scale. 【Features】 ■ Semi-automatic type ■ Manual handling of simple tasks to reduce costs ■ Filtration capacity available from 50L to 700L ■ Efficient solid-liquid separation possible ■ Inexpensive *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials
• Hazardous material processing
• Water treatment equipment

A filter press that can shorten the conventional repetitive work time through air pressure compression.

The "KYS-C type" is a screw-type filter press that achieves a moisture content reduction of 5% to 10%. By using air compression, it is possible to shorten the conventional repetitive work time. Additionally, by increasing the amount of sludge processed in a single dewatering process, it can reduce initial costs and lower the costs associated with industrial waste. 【Features】 ■ Achieves a moisture content reduction of 5% to 10% ■ Cuts volume by 20% to 30% compared to standard types ■ Reduces dewatering process time ■ Achieves cost reduction *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines

The moisture content of the dehydrated cake is very low, allowing for efficient solid-liquid separation!

Introducing the synthetic resin dewatering machine (filter press). 【SPS-MSP Type】 Double-acting electric hydraulic clamping mechanism Manual operation for opening the plates We have automated as much of the labor-intensive work as possible while keeping the easier tasks manual to reduce costs. This model strikes the best balance between functionality and cost, making it highly rated. The types range from filtration capacities of 50L to 700L. Among dewatering machines, filter presses achieve a very low moisture content in the dewatered cake, allowing for efficient solid-liquid separation. However, while filter presses operate in batches, screw presses and decanter belt presses can process continuously, which is an advantage. Compared to those, filter presses are appealing due to their lower cost. For more details, please download and view the catalog.

• Other processing machines

The moisture content of the dehydrated cake is very low, allowing for efficient solid-liquid separation!

Introducing the dewatering machine (filter press) for synthetic resin boards. 【KDA-SA Model】 Double-acting electric hydraulic clamping mechanism Plate opening via switch operation We have automated the labor-intensive parts as much as possible while keeping the easier tasks manual to reduce costs. This model strikes the best balance between functionality and cost, making it highly rated. The types range from filtration capacities of 50L to 700L. Among dewatering machines, filter presses achieve a very low moisture content in the dewatered cake, allowing for efficient solid-liquid separation. However, while filter presses operate in batch mode, screw presses and decanter belt presses offer the advantage of continuous processing. Compared to those, the affordability of filter presses is appealing. For more details, please download and view the catalog.

• Other processing machines

The moisture content of the dehydrated cake is very low, allowing for efficient solid-liquid separation!

Introducing the resin filter press dewatering machine. We have automated the labor-intensive parts as much as possible while keeping the easier tasks manual to reduce costs. This model strikes the best balance between functionality and cost, making it highly rated. The types available range from filtration capacities of 50L to 700L. Among dewatering machines, the filter press achieves a very low moisture content in the dewatered cake, enabling efficient solid-liquid separation. However, while the filter press operates in batches, the screw press and decanter belt press have the advantage of continuous processing. Compared to those, the filter press is appealing due to its lower cost. For more details, please download and view the catalog.

• Other processing machines

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.

Dear Sir/Madam, I would like to express my sincere congratulations on your continued prosperity. I also wish to extend my heartfelt gratitude for your exceptional support. Now, I regret to inform you that we will be discontinuing the manufacturing and sales of the following product, which you have long supported. ■ Product in question: TIC Corporation's tubing dispenser and hand switch ■ Product page: For product details, click here ■ Discontinuation date: End of July 2025 ■ Alternative product: MCRP type roller pump / pen-type hand switch If you have any questions regarding this matter, please feel free to contact our representative. We sincerely hope for your continued patronage in the future. Thank you very much.

The delivery time for the following models is currently about 4 weeks. - Standard specification model with full scale from 2 mL/min to 500 L/min (M/MB/MC series) - Low pressure loss model with full scale from 2 mL/min to 100 L/min (MW/MWB/MCW series) *Delivery times may vary depending on the type of options, so please inquire. *The delivery time for the controller may vary depending on pressure conditions, so please inquire. The delivery time for other models is approximately 2 to 3 months. For more details, please request a quote or consultation.

At Same Sky, we continuously manufacture and sell magnetic buzzers and piezo buzzers. Among them, we have received numerous inquiries about the EOL products of piezo buzzers made by Murata Manufacturing, so we have listed our products that are considered to be as close as possible.