[Technical Column] Even if it looks the same, is the content different? Verifying the "uniformity" of stirring.

A manufacturer specializing in liquid mixing has produced it! Here is a summary of the features of the mixer equipped with the Bernoulli flow mixing body BEAG.

The Bernoulli flow mixer introduced in this document is a mixer equipped with the Bernoulli flow stirring body BEAG. The Bernoulli flow stirring body BEAG utilizes centrifugal force. By utilizing the pressure difference created by centrifugal force, it stirs liquids uniformly. A characteristic of BEAG is that it does not have stirring blades like propellers or holes for utilizing centrifugal force. The Bernoulli flow mixer is recommended for customers who are facing the following issues: - They are dealing with high-viscosity liquids that are difficult to mix, causing delays in stirring operations. - The liquid is settling, making it hard to stir. - They want to eliminate air entrapment. - They want to use it in a sealed and pressure-resistant manner. - They want to prevent foreign matter contamination from the shaft. This document summarizes the mechanism of BEAG's stirring and the centrifugal mixer equipped with BEAG. Please take a look.

• Mixer/agitator

This is an original air motor mixer from Nitto Metal Industry. It is ideal for preventing foaming during mixing and for stirring high-viscosity liquids.

- It can stir in a sealed state with a Heller connection. Pressure reduction is also possible. - It can stir liquids with low to medium-high viscosity. - It comes standard with a waste receiver to prevent contamination from wear particles generated at the shaft seal. - The stirring body is a Bernoulli flow stirring body type BEAG E, which is less likely to incorporate air. (Patent No. 6169207) - It can be used in explosion-proof areas. - Made entirely of stainless steel, it is resistant to rust and hygienic. - It can be used without lubrication, so there is no oil splatter. For more details, please visit our website. https://www.monovate.co.jp/shop/g/gntma-s/

• Mixer/agitator

This is an original electric motor stirrer from Nitto Metal Industry. It is ideal for preventing foaming during stirring and for stirring high-viscosity liquids.

- It features an easy-to-remove and attach connection. - It can stir in a sealed state and is usable under both pressurized and vacuum conditions. - It can stir liquids with low to medium-high viscosity. - It comes standard with a debris collector to prevent contamination from wear particles generated at the shaft seal. - The stirring element is a Bernoulli flow stirring element type BEAG E, which is designed to minimize air entrapment. (Patent No. 6169207) - It is equipped with a standard controller that allows for speed adjustment. For more details, please visit our website. https://www.monovate.co.jp/shop/g/gntme-a/

• Other energy equipment

A stirring machine with excellent stirring capabilities that suppresses foaming (Bernoulli flow stirrer BEAG E type).

- Capable of stirring approximately 30 to 150 liters. - Utilizes a stirring body that excels in stirring without incorporating air. - Uses an aluminum air motor that can stir at a maximum of 1050 rpm (for viscosity similar to water). - Can be used in explosion-proof areas. - Can be used without lubrication, eliminating concerns about oil splatter. - Vertical type that connects to the container lid with a Heller connection. - The connection between the container and the stirrer can be sealed, preventing contamination from external foreign substances.

• Mixer/agitator

A stirring machine with excellent stirring capabilities that suppresses foaming (Bernoulli flow stirring body BEAG E type).

- Capable of stirring approximately 30 to 150 liters. - Features a stirring body that excels in stirring without incorporating air. - Uses an aluminum air motor that can stir at a maximum of 1050 rpm (for viscosity similar to water). - Can be used in explosion-proof areas. - Can be used without lubrication, eliminating concerns about oil splatter. - Portable design with a clamp connection to the base. - The stirrer can slide back and forth to adjust the stirring position.

• Mixer/agitator

A stirring machine with excellent stirring capabilities that suppresses foaming (Bernoulli flow stirring body BEAG E type).

- It is capable of stirring approximately 30 to 150 liters. - It uses a stirring body that excels in stirring without incorporating air. - An aluminum electric motor is used, capable of stirring at a maximum of 800 rpm (for viscosity similar to water). - A controller is included, making it easy to adjust the rotation speed. *The controller is separate. - It is a vertical type that connects to the lid of the container with a Helaur connection. - The connection between the container and the stirrer can be sealed, preventing contamination from external foreign substances.

• Mixer/agitator

A stirring machine with excellent stirring capabilities that suppresses foaming (Bernoulli flow stirring body BEAG E type).

- It is capable of stirring approximately 30 to 150 liters. - It employs a stirring body that excels in stirring without incorporating air. - It uses an aluminum electric motor that can stir at a maximum of 800 rpm (for viscosity similar to water). - A controller is included, making it easy to adjust the rotation speed. *The controller is separate. - It is a portable type that connects to the base with a clamp. - The stirrer can slide back and forth to adjust the stirring position.

• Mixer/agitator

High power for reduced heating time! A stirring temperature control unit that can evenly heat contents in a short time.

- It comes with a stainless steel container, heater, stirrer, and valve. - It uses a water bath method to indirectly heat the contents and prevent sticking. - By heating while stirring, the contents can be heated evenly. - It can heat up to a maximum of 80°C. - The stirrer uses a "Bernoulli flow stirrer" that excels in suppressing foaming. - Compared to chillers (constant temperature water circulation devices), it is characterized by being "faster to heat," "cheaper," and "more compact." - The temperature of the contents can be adjusted through the linkage between the thermometer and the heater. - It comes with a level gauge that allows you to check the water level inside the jacket.

• tank

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

***Contract Processing Now Accepting Orders*** We can accommodate small lots and a variety of sample tests, including spray drying with organic solvents. Please feel free to contact us. ----Example of a Prototype Schedule---- 9:30 Pre-test Meeting 10:00 Spray Drying Test Starts 12:00 Lunch Break 13:00 Spray Drying Test Resumes 16:00 Post-test Meeting

【Period: Ongoing until May 31, 2026】 Now 20% OFF! For orders of 10 or more: Dry T-shirts @ 1,600 yen (tax included) Dry polo shirts @ 2,000 yen (tax included) (Price includes the garment and one print location) * For sizes 3L and above, an additional 550 yen * An additional 550 yen for each additional print location Design and data production fees are required separately. (No fee for complete data submission) We accept orders for various purposes such as events, teams, goods, souvenirs, and gifts, from one piece to mass production. We also have many other garments not listed. Please feel free to inquire.

We have announced the "piCOBOT Electric (Standard I/O)," an electric vacuum gripper compatible with most collaborative robot brands. It enables clean and energy-efficient automation without the need for compressed air, simplifying equipment configuration while improving energy efficiency. It supports various collaborative robot brands, allowing for flexible automation. With a universal Standard I/O interface, smooth integration with major collaborative robots is possible. Additionally, its lightweight and compact design maximizes the robot's portability. By combining it with various suction cups and accessories from Piab, you can build a flexible handling system that accommodates diverse workpieces. Read the article here: https://www.piab.com/ja-jp/news/piab-launches-picobot-electric--all-electric-vacuum-gripping-for-any-cobot-brand

This column is a special series consisting of 12 installments themed around user manuals. In the first installment, we will focus on the often-overlooked "risks of postponing the user manual" in relation to CE marking compliance. In the process of obtaining CE marking, attention is often concentrated on design and safety measures, leading to cases where the preparation of the user manual is delayed. However, in practice, deficiencies in the user manual can lead to the following issues: - Rejection just before the review - Increased costs due to design revisions - Schedule delays - Product liability (PL liability) risks after shipment Even if CE marking is obtained, it is important to be aware that insufficient information provision can leave risks associated with the product.