Precision grinding of super hard soldered SUS materials (accommodating geometric tolerances such as straightness).

Precision machining of stainless steel × cemented carbide brazed products at the micron level! It is a challenging machining technique due to warping that occurs during the brazing of cemented carbide and the grinding process.

We provide precision machining services for materials that are brazed with cemented carbide and austenitic stainless steel (SUS304 series). We perform precision machining on the base material brazed with cemented carbide using techniques such as grinding and electrical discharge machining. The brazed materials are heated in the previous process, which usually causes distortion in the base material. We carry out precision machining, which requires strict geometric tolerances, while removing this distortion. Particularly when the base material is made of SUS or other materials with a high coefficient of thermal expansion, significant warping occurs during the brazing of cemented carbide, and new warping can also develop during the grinding process, necessitating advanced machining techniques. For more details, please refer to the "Cemented Carbide Machining Technology and Idea Introduction Special Feature" document.

• Other processing machines

Precision processing of stainless steel × carbide brazed products at the micron level.

We provide precision machining services using cemented carbide and austenitic stainless steel (SUS304 series) as base materials for brazed products. The base material with brazed cemented carbide will be precisely machined using techniques such as grinding and electrical discharge machining. The brazed products have been heated in the previous process, which usually results in distortion of the base material. We will perform precision machining that requires strict geometric tolerances while removing the distortion of the base material. In particular, when the base material is made of high thermal expansion coefficient materials such as SUS, significant warping occurs during the brazing of cemented carbide, and new warping can also develop during the grinding process, necessitating advanced machining techniques. For more details, please refer to the "Machining Technology Special" document.

• Other processing machines

Are you making progress on measures for the "2024 Problem"? With stricter management of drivers' working hours, reducing "waiting time" has become an urgent issue in the logistics field. To address this challenge, our company, Hotron, proposes the "Vehicle Detection Ultrasonic Sensor 'HM-UX2'," which instantly grasps the availability of loading bays. The 'HM-UX2' contributes to the resolution of waiting times by accurately understanding the availability situation, reducing unnecessary waiting and queueing, and shortening waiting times to alleviate the burden on drivers! By replacing the "eyes" of your loading bay management with this high-precision sensor, why not start addressing the "2024 Problem"? Take a look at the product features: "Can it accurately detect availability?" "Can we really use it in our company?" "I just want to know the cost, even if it's an estimate." If you have any questions or requests, please feel free to consult with us.

The non-contact beam touch sensor "HA-T401/HA-T520" has a compact detection range, making it an ideal automatic door sensor for installation on automatic doors facing narrow corridors or busy streets. Depending on the application and installation location, you can choose between "non-vision mounting type" and "non-vision built-in type." 【Features】 ● With the beam touch sensor, you can open and close the automatic door simply by bringing your hand close without touching it, ensuring hygiene. ● Depending on the installation environment, such as single sliding or bi-parting doors, the detection range can be set in four ways: left, center, right, with 4 spots and 12 spots settings. ● Two types of activation row settings are available to reduce unnecessary opening and closing of the automatic door due to cross traffic, contributing to energy-saving effects. ● The touch switch and infrared sensor are integrated, allowing for a switch between beam touch and infrared sensor modes with a single model. 【Recommended for such places!】 ☑ Entrances facing busy corridors ☑ Counters or signs near the door ☑ Buildings facing narrow corridors ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors ◎ For more details, please download the materials or contact us.

Japan is among the top 10 countries in the world with frequent earthquakes. The 2020 White Paper on Land, Infrastructure, Transport and Tourism has also reported an increase in the probability of significant earthquakes occurring. For the Nankai Trough earthquake, the probability of an earthquake with a magnitude of 8 to 9 occurring within the next 30 years is estimated to be 70 to 80%. At Hotron, we recommend the introduction of seismic devices for earthquake measures in buildings and equipment. The seismic device 'HK-2' is a product that automatically performs various controls that have been pre-set when it detects strong shaking equivalent to a seismic intensity of 5 lower or higher. For example, it can automatically execute actions such as: "Open automatic doors and gates to secure evacuation routes and access for emergency vehicles" "Transmit signals to the control room and stop facility equipment" "Unlock the keys to locked lockers" "Automatically play voice guidance" ◎ For more details, please download the materials or contact us.

The delivery time for the following models is currently about 4 weeks. - Standard specification model with full scale from 2 mL/min to 500 L/min (M/MB/MC series) - Low pressure loss model with full scale from 2 mL/min to 100 L/min (MW/MWB/MCW series) *Delivery times may vary depending on the type of options, so please inquire. *The delivery time for the controller may vary depending on pressure conditions, so please inquire. The delivery time for other models is approximately 2 to 3 months. For more details, please request a quote or consultation.

Grabee is a next-generation monitoring solution equipped with new features specialized for forest fire and wildlife damage prevention, based on AI video analysis and location estimation technology developed at Guardian. In addition to the conventional location estimation function, it now includes flame identification and animal identification capabilities, enabling early detection and response to forest fires and wildlife damage. Furthermore, it supports mapping of fire areas and area calculations.