Our energy storage system was featured in the Electronics Device Industry Newspaper (May 13, 2021 issue).

[Power Outage Measures] For those who have a new type of coronavirus vaccine refrigerator, unexpected long-term power outage measures can be addressed with a medical-grade emergency small storage battery!

【Power Outage Measures】 ▲ Power outage measures for ultra-low temperature freezers storing COVID-19 vaccines and other items, including emergency power supply and backup power. ▲ Provides power to ultra-low temperature freezers for 10 hours without interruption during a power outage (based on a power consumption of 300W). ▲ High output of 1500W! Capable of handling inrush current. - Cases of vaccine disposal due to power outages are occurring frequently. Freezers for vaccine storage are experiencing power shortages due to insufficient power capacity, or unexpected power outages causing freezers to stop, leading to an inability to maintain appropriate storage temperatures, which results in frequent vaccine disposal. The emergency small storage battery from CONNEXX SYSTEMS is originally designed for emergency power supply in facilities that freeze cells and specimens, developed to handle inductive loads. It can provide power to ultra-low temperature freezers and refrigerated storage for approximately 10 hours without interruption. (Based on a power consumption of 300W). It is portable with large casters, making it possible to bring it to vaccination sites. It can continue to be used as a backup power supply for important equipment even after the COVID-19 pandemic is over.

• Secondary Cells/Batteries

A large-capacity, compact industrial energy storage system <BLP> that corresponds to the operation of the energy storage system defined in the resilience ZEB demonstration project.

A large-capacity, compact industrial storage system compatible with the operation of the storage system defined in the Resilience ZEB demonstration project. ■ It is expected to reduce installation costs through subsidies limited to public facilities. A project promoting the introduction of autonomous and decentralized energy equipment, such as evacuation facilities, that simultaneously realizes regional resilience and decarbonization. Support for the introduction of renewable energy generation and storage systems in public facilities designated as evacuation facilities and disaster prevention bases. If introduced through a system that incurs no initial costs, priority selection is given, with subsidy rates of one-third for prefectures, ordinance-designated cities, and specified cities; one-half for solar power generation and cogeneration systems in municipalities; and two-thirds for remote islands. (Source: Ministry of the Environment website) ■ Features and Strengths ● Compatibility with PV Thanks to the pseudo-grid connection function, normal power generation is possible even during power outages without the PV power conditioner entering autonomous operation. ● Constructability Designed in a compact size that allows outdoor installation without the need for a separate enclosure, featuring a stainless steel casing with IP54 equivalent waterproof and dustproof properties. ● Expandability Up to four units can be connected in parallel within the same system, with a maximum output of 120kVA (30kVA output for each of the four during autonomous operation) / 294.8kWh.

• Other power sources
• Lithium-ion battery
• Power storage device

A disaster prevention, mitigation, and industrial storage system that ensures power supply during emergencies and supports daily self-consumption. Achieving groundbreaking price, performance, and safety!

The industrial storage system from Connex Systems, the BLP, is designed for outdoor installation and can accommodate both emergency power supply and daily self-consumption. Additionally, its compact design integrates the PCS and battery housing, contributing to space-saving. It is a system suitable for BCP applications that can be reasonably scaled up to meet only the necessary demands during emergencies. 【Features】 - Rated output: 30kW / Storage capacity: approximately 73.7kWh - Contributes to BCP measures for facilities and businesses, as well as reducing environmental impact through self-consumption - Compact outdoor installation type that does not require housing storage This industrial storage system is characterized by its compatibility with PV systems, allowing the PV power conditioner to operate independently during power outages without entering self-operation mode, enabling normal power generation. It can handle prolonged power outages in conjunction with solar power generation. Additionally, during normal operation, it allows for efficient power usage through peak cut and peak shift. With a 30kW output, it can supply electricity to three-phase power sources, making it possible to operate large air conditioners, commercial refrigerators, elevators, machine tools, large motors, pumps, and more during power outages. *For more details, please refer to the materials. Feel free to contact us with any inquiries.*

• Secondary Cells/Batteries
• Lithium-ion battery
• Power storage device

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.

We developed a system that expands the functions of the electronic manifest ASP "KENET" to record the traceability from waste to the creation of recycled resources using blockchain technology. In May 2025, as a pre-service, we implemented registration functions from waste registration to the input of the recycling process and the completion of recycled resources. In January 2026, we newly developed functions for inventory management and shipping of recycled materials. The system also includes a CFP registration function for recycled resources, allowing for data input on the decarbonization effects of resource circulation. We aim to utilize the waste management functions cultivated over 18 years with KENET to advance into the field of resource circulation and work towards the effective use of waste for a circular society.