Have you completed your pre-registration for the event? Primix will be exhibiting at FOOMA JAPAN (Aichi Sky Expo) starting tomorrow.

For those struggling with the dissolution and dispersion of powders! We propose a powder dissolution device that uses CombiMix® to uniformly mix powders and liquids into a slurry.

【Vacuum-type Powder Dissolution System】 This system creates a vacuum state inside the CombiMix® tank and draws in powder through the bottom valve. It dissolves and disperses powders such as silica, resin powder, tantalite, and pigments in a short time. <The vacuum inside the tank allows for the suction of powder raw materials> ◎ No entrapment of air bubbles! ◎ Prevents the formation of lumps! ◎ Reduces processing time! ◎ No powder adhesion around the liquid surface! ◎ Prevents the scattering of powder within the factory! ◎ Optimal conditions can be set (automated) according to the processed materials! *For more details, please download the catalog or contact us.

• Emulsifier/Disperser
• Mixer/agitator
• Homogenizer

Effective for the dispersion and mixing of high-viscosity materials such as thickening agents! This newly developed mixer (patent obtained) breaks down clumps with high shear force and mixes the entire batch uniformly.

**Features** - Capable of dispersing and mixing high-viscosity materials. - Efficiently flows the processing liquid and foam through "three-dimensional wings" and "S-shaped effects." - Excellent suction from the axial direction and discharge in the radial direction, ensuring uniform mixing throughout. - Effective for dispersing and mixing materials that tend to float near the liquid surface or settle at the bottom of containers. - A turbine with a three-dimensional structure that allows foam and processing liquid to flow naturally. ◆◇━━━━━━━━━━━ 　　　Testing Now Available! ━━━━━━━━━━━━◇◆ If you have materials that are difficult to disperse or homogenize, please give it a try. Feel free to contact us if you wish to request a test.

• Emulsifier/Disperser
• Mixer/agitator
• Homogenizer

Telecorta has been renewed to be even more resistant to high viscosity! It demonstrates effectiveness in dissolution, dispersion, and mixing for high viscosity stirring (patent obtained). Testing is currently being accepted.

The Telecolta R is a stirring blade that generates a strong liquid flow by adopting a propeller shape while possessing dispersion power equivalent to that of a homodisperse. It exhibits strong dispersion power with the main wings that have their tips bent, and the auxiliary wings, which are slightly larger in diameter than the main wings, help reduce the entrapment of bubbles. It has been renewed to be even more effective for high-viscosity materials! *Testing for the Telecolta R is currently being accepted. For more details, please contact us using the form below.

• Emulsifier/Disperser
• Mixer/agitator
• Homogenizer

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, and management: Are you facing any issues with the challenges you currently have or selecting the right sensors for parking lot management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Basic Guide to Vehicle Detection Sensors This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document introduces the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

"Electronic contracts for national and local governments are also available with 'paperlogic Electronic Contracts'" In December of last year (2023), we inquired about our service 'paperlogic Electronic Contracts' regarding the 'Law and Orders Related to Regulations on New Business Activities' utilizing the Digital Agency's gray zone resolution system. As a result, we received a response from the Digital Agency stating that 'paperlogic Electronic Contracts' can be used as an electronic record in place of paper contracts for national and local government contracts. "'paperlogic' is endorsed by the Digital Agency" In this inquiry, we received confirmation that 'paperlogic Electronic Contracts' can be utilized as an electronic record in place of paper contracts for national and local government contracts. From now on, you can confidently use 'paperlogic Electronic Contracts' not only for contracts between private companies but also for all types of contracts in local government practices, including administrative contracts and discretionary contracts. For business document digital transformation and electronic contract services, feel free to consult with paperlogic.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If you require a detailed technical explanation, please contact us.