Introducing the long-length FPC electrical testing device 'TY-CHECKER DS301/DS401AT' (continuity testing, insulation testing, four-terminal testing, spark testing).

Achieving stable electrical testing through independent plate transportation. (Continuity testing, insulation testing, four-terminal testing, micro-short detection, spark) FPC, long length.

The "TY-CHECKER DS301" is a Y-direction step-and-repeat electrical inspection device designed for long FPC (flexible printed circuit boards). It is ideal for continuity and insulation testing of automotive FPCs and similar applications. (It also supports rigid-flex and hard boards!) Thanks to its unique dedicated plate holding method that does not apply tension, stable inspections are possible. *Stable inspections can be achieved even with cutouts such as slits. 【Features】 ■ Maximum inspection size: 610×270mm ■ Automatic alignment for upper and lower sections. ■ Learning-type alignment is standard equipment. ■ High-precision inspection unit included. ☐ CE compliant *For more details, please refer to the PDF document or feel free to contact us. #BoardInspection #InspectionEquipment #ElectricalTesting #Continuity #Insulation #FourTerminal #Open #Short #Leak

• Circuit Board Inspection Equipment

The printed circuit board electrical testing machine can perform high-frequency testing automatically/semi-automatically (continuity testing, insulation testing, four-terminal testing, micro-short detection).

The "TY-CHECKER DS401 (AT)" is a powered inspection system that adds X-direction movement (horizontal movement) to the conventional Y-direction step and repeat transport. It supports both a unique dedicated plate holding method that does not apply tension and a tension holding method, allowing for selection based on the product. By swapping out the measurement section, high-frequency characteristic testing can be performed on sheets or individual pieces, achieving stable automatic/semi-automatic high-frequency inspection by leveraging the advantages of a fixed jig. 【Features】 ■ Step and repeat transport in the XY direction ■ Contributes to downsizing of jig head (reducing jig costs) ■ Selectable product holding methods ■ Compatible with high-frequency characteristic testing *For more details, please refer to the PDF materials or feel free to contact us. #CircuitBoardInspection #InspectionEquipment #PoweredInspection #ElectricalTesting #Continuity #Insulation #Open #Short #Leak #FourTerminal #Testing

• Other inspection equipment and devices

Sheet substrate electrical testing system! (Continuity testing, insulation testing, four-terminal testing, micro-short detection) FPC, flexible substrates, PCB, PKG

The "TY-CHECKER DS series" is a power continuity inspection system optimized for sheet substrates represented by FPC (Flexible Printed Circuit Board). It adopts a unique dedicated plate holding method (patented) that does not apply tension, achieving stable transport even for ultra-thin FPCs and flex circuits after punching. The inspection unit is equipped with a high-precision checker, capable of conducting continuity tests, insulation tests, four-terminal tests, and micro-short detection. 【Features】 ■ Unique transport system: Dedicated plate transport method ■ Equipped with a unique dual alignment system! 　□ Learning-type camera-less alignment 　□ Built-in camera alignment within the fixture ■ Various fixtures (wire-type and composite-type) can be installed, allowing for cost reduction. *For more details, please refer to the PDF document or feel free to contact us. #BoardInspection #InspectionEquipment #PowerContinuityTest #ElectricalTest #Continuity #Insulation #Open #Short #Leak #FourTerminal #Inspection

• Semiconductor inspection/test equipment
• Other inspection equipment and devices
• Circuit Board Inspection Equipment

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

On November 6th (Thursday) to 7th (Friday), 2025, we held the "Human Body Day 2025" at the NAC Image Technology Akasaka Multi-Purpose Space. We have uploaded videos of the highlights from each company and the presentations that took place on the day to our website. We encourage you to take a look. ---[Report on Human Body Day 2025 is here]------------------- https://info.nacinc.jp/jintaiday2025-report ------------------------------------------------------------------------- On the day of the event, participants were able to experience a wide range of products in a hands-on session format, including motion capture, force plates, eye tracking, and human body analysis software. We received numerous comments from attendees expressing high satisfaction, saying, "It was great to gain various information all at once," which makes us very happy. NAC Image Technology will continue to provide "valuable products to our customers." We hope you will join us for our next event as well.

Features: ● Equipped with Intel Core Ultra 7 255H/7 155H/5 225H/5 125H ● LPDDR5x 16GB/32GB/64GB onboard ● M.2 NVMe 256GB onboard ● USB 2.0 x 8, USB 3.2 (10Gbps) x 4 ● PCIe Gen 4 [x8] x 1, PCIe Gen 3 [x1] x 4, PCIe Gen 3 [x4] x 1 (2 lanes co-lay with SATA; BOM option) ● 2.5GbE x 2 ● COM-HPC Mini standard, size 95mm x 70mm ● Optional items ECB-980A: Development carrier board HPC-ARHm-FAN01: CPU fan HPC-ARHm-HSP01: Heat spreader (Note: heat dissipation is required in the enclosure)

Features: ● Equipped with Jetson AGX Orin 32GB/64GB ● Gigabit LAN ×1, 10Gigabit LAN ×1 ● USB 3.2 Gen 2 (Type-A) ×4 ● DB-9 connector ×1 (for DIO 8 channels) ● DB-9 connector ×2 (supports RS-232/422/485: Rx/Tx/RTS/CTS) ● Jetpack 6.0.0 pre-installed