【TAIYO】The one-press type manual power-on inspection system has been renewed! A classic model! (Continuity testing, insulation testing, four-terminal testing, spark testing)

The basic form of the electrical testing system is used for electrical inspection of various substrates (PCB, FPC, continuity testing, insulation testing, four-terminal testing, spark testing).

This is a manual power-on inspection system of the one-plate type. With over 35 years of proven experience, the reliable TY-CHECKER series! (Continuity, insulation, four-terminal, micro-short, spark testing, etc.) Please feel free to consult us regarding various specifications. 【Features】P20E ■ Maximum inspection size: 550×340mm ■ Equipped with a micrometer adjustment mechanism for the lower fixture. ■ Designed with safety considerations for both the working side and the back side. #CircuitBoardInspection #InspectionEquipment #PowerOnTesting #ElectricalTesting #Continuity #Insulation #Open #Short #Leak #FourTerminal #Testing

• Circuit Board Inspection Equipment

Achieving stable electrical testing through independent plate transportation. (Continuity testing, insulation testing, four-terminal testing, micro-short detection, spark) FPC, long length.

The "TY-CHECKER DS301" is a Y-direction step-and-repeat electrical inspection device designed for long FPC (flexible printed circuit boards). It is ideal for continuity and insulation testing of automotive FPCs and similar applications. (It also supports rigid-flex and hard boards!) Thanks to its unique dedicated plate holding method that does not apply tension, stable inspections are possible. *Stable inspections can be achieved even with cutouts such as slits. 【Features】 ■ Maximum inspection size: 610×270mm ■ Automatic alignment for upper and lower sections. ■ Learning-type alignment is standard equipment. ■ High-precision inspection unit included. ☐ CE compliant *For more details, please refer to the PDF document or feel free to contact us. #BoardInspection #InspectionEquipment #ElectricalTesting #Continuity #Insulation #FourTerminal #Open #Short #Leak

• Circuit Board Inspection Equipment

The printed circuit board electrical testing machine can perform high-frequency testing automatically/semi-automatically (continuity testing, insulation testing, four-terminal testing, micro-short detection).

The "TY-CHECKER DS401 (AT)" is a powered inspection system that adds X-direction movement (horizontal movement) to the conventional Y-direction step and repeat transport. It supports both a unique dedicated plate holding method that does not apply tension and a tension holding method, allowing for selection based on the product. By swapping out the measurement section, high-frequency characteristic testing can be performed on sheets or individual pieces, achieving stable automatic/semi-automatic high-frequency inspection by leveraging the advantages of a fixed jig. 【Features】 ■ Step and repeat transport in the XY direction ■ Contributes to downsizing of jig head (reducing jig costs) ■ Selectable product holding methods ■ Compatible with high-frequency characteristic testing *For more details, please refer to the PDF materials or feel free to contact us. #CircuitBoardInspection #InspectionEquipment #PoweredInspection #ElectricalTesting #Continuity #Insulation #Open #Short #Leak #FourTerminal #Testing

• Other inspection equipment and devices

Sheet substrate electrical testing system! (Continuity testing, insulation testing, four-terminal testing, micro-short detection) FPC, flexible substrates, PCB, PKG

The "TY-CHECKER DS series" is a power continuity inspection system optimized for sheet substrates represented by FPC (Flexible Printed Circuit Board). It adopts a unique dedicated plate holding method (patented) that does not apply tension, achieving stable transport even for ultra-thin FPCs and flex circuits after punching. The inspection unit is equipped with a high-precision checker, capable of conducting continuity tests, insulation tests, four-terminal tests, and micro-short detection. 【Features】 ■ Unique transport system: Dedicated plate transport method ■ Equipped with a unique dual alignment system! 　□ Learning-type camera-less alignment 　□ Built-in camera alignment within the fixture ■ Various fixtures (wire-type and composite-type) can be installed, allowing for cost reduction. *For more details, please refer to the PDF document or feel free to contact us. #BoardInspection #InspectionEquipment #PowerContinuityTest #ElectricalTest #Continuity #Insulation #Open #Short #Leak #FourTerminal #Inspection

• Semiconductor inspection/test equipment
• Other inspection equipment and devices
• Circuit Board Inspection Equipment

A wide range of lineups based on the number of points! High-speed, high-precision inspection tester [continuity testing, insulation testing, four-terminal testing, micro-short detection].

The "Type E" is an electrical testing machine that achieves high-speed and high-precision inspections. It has a compact design that does not take up much space, allowing it to be placed on a desk. We offer a wide range of options to choose from based on inspection requirements, including the number of points, high-precision four-terminal testing, and micro-short testing. Additionally, it can be connected to hand presses or jigs that you may already own for use. 【Features】 ■ A tester that forms the core of the electrical testing system "TY-CHECKER series" ■ Compact design ■ Abundant options ■ Excellent versatility #BoardInspection #TestingEquipment #PowerOnTesting #ElectricalTesting #Continuity #Insulation #ShortCircuit #OpenCircuit #FourTerminal

• Circuit Board Inspection Equipment

The "CCS2" is a ceiling-mounted vehicle counting sensor that employs an infrared reflection method. It can detect vehicles in both directions with just one unit, accurately counting vehicles even during traffic jams or when vehicles pass each other. Additionally, this product can be used not only for vehicle counting but also as a sensor for departure warnings. Furthermore, by using a separately sold dedicated remote control, it is easy to reset the sensor alone, switch the counting direction, and change the patterns of the departure warning timer. 【Features】 ■ Angle adjustment is possible up to ±5° ■ Can be installed in locations with high ceilings up to 4m ■ Detection area consists of 40 spots, allowing for wide-range detection ■ The display LEDs are color-coded by direction, making operation confirmation easy.

We will introduce the implementation results of the sensor technology developed by the Hotron Group, which has been cultivated over more than half a century, through customer case studies. In addition to automatic door sensors, we also offer a wide range of vehicle detection sensors and nursing/care sensors. Many implementation examples are also presented, so please take a look at the case study page.

The RNP-45 is a surface mount power film resistor designed to be compatible with the TO-252 package, weighing only 0.33 grams, with a thermal resistance of 3.0°C/W and a rated power of 45W. The resistive element is a pulse-resistant thick film, featuring excellent high-frequency characteristics with a reactance component of 2.7pF and 14.7nH, while also having a pulse power performance of 1kW-1µs despite its small size. The operating temperature range is from -55 °C to +175 °C. Additionally, it incorporates several design features, such as the removal of the metal flange to maximize the thermal performance of the resistor, compatibility with standard reflow SAC solder joints instead of wire bond connections, making it suitable for automatic mounting, an increased resistive element area to enhance surge performance, and the adoption of a 0.8mm substrate to strengthen bending stress.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

Hotron's vehicle detection sensors allow you to search for products that meet your needs in three categories: "Purpose of Use," "Location of Use," and "Product List." The sensors detect the passage of vehicles, alerting you with rotating lights or switching the display of parking availability. They manage vehicle presence, full parking, and exit warnings in parking lots, contributing to safe driving and smooth operational management within the parking area. They are used in various settings, from coin-operated parking to large-scale parking lots.