Profitap Network TAP C1P-1G

Equipped with a Fast Failover feature that can switch in under 300ms. A monitoring device that guarantees a persistent network connection!

Profitap TAP products, unlike inexpensive aggregation taps, are full-duplex taps (BreakoutTAP) that do not experience packet loss. Aggregation taps capture traffic in full-duplex mode, but there is a possibility of drops occurring on the capture port. On the other hand, in a full-duplex tap (BreakoutTAP), packets captured on two ports are copied to both ports. The receiving PC needs to have two NICs, but it can capture packets of all sizes and types from layers 1 to 7, including low-level errors and VLAN traffic, without any packet loss. Additionally, since there is no need to set an IP address, monitoring can be conducted with enhanced security and concealment.

• Other network tools

Achieve lightweight and easy real-time network capture!

- 10/100/1G bps full capture - Powered via USB 3.0, no adapter required - Connects to PC via USB 3.0 - Hardware timestamp with 8ns resolution - Real-time display using analysis software like Wireshark - Capable of statistical analysis including CRC errors and frames - Directly saves to the computer's SSD/HDD using dedicated tools - Compatible with Windows 7/8/10 (32/64bit), Linux, and MAC OS - Made in the Netherlands *The ProfiShark series includes: 1G Plus: with GPS (supports time synchronization via GPS) 10G: 10G type. *By connecting to a NAS, it can also support long-duration continuous capture.

• Server monitoring and network management tools

Capture, save, and analyze all in one device! Compact and lightweight, with remote access and management capabilities!

- 1G: 10/100/1G bps, 10G: 1G/10Gbps full capture - Built-in 1TB storage (expandable via USB) - Hardware timestamp with 8ns resolution - Built-in traffic analysis software, capable of flow-based analysis - Capable of analyzing over 200 applications/protocols (Office 365, Skype, Netflix, etc.) - Can be taken on-site and capture can be started with a button press - Designed to isolate the capture interface from the control port, internal storage, and analysis processing unit to ensure the safety of the target network - Equipped with a fail-safe function that quickly restores the link when the main power goes down - PoE passthrough allows capture from lines powered by PoE - Available in portable and rack-mounted types, with options for DC12V and DC24-48V - Maximum network latency: 1Gbps: 400ns, 100Mbps: 660ns, 10Mbps: 6600ns - 12V power or 24-48V power * There is also a lineup of 10G (SFP+) rack-mounted types available.

• Server monitoring and network management tools

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The sheets used at construction sites require various considerations, including strength, workability, transportability, work burden, and safety. What we have developed is the Hyper CLT sheet (NETIS number: TH-250021-A). The Hyper CLT sheet is not just aimed at being a new "wooden sheet." What we value is that it can truly be used on-site and that we can make proposals based on evidence rather than intuition. To achieve this, we have focused on the feedback and usability obtained from actual construction sites while advancing the acquisition and verification of various data through collaboration with universities. Points that may be difficult to see in solo corporate development have been organized from a more objective perspective by incorporating university expertise, which has been reflected in product development. It needs to be evaluated comprehensively, considering weight, maneuverability, burden during installation, consideration for the surrounding environment, and ease of introduction. In this context, the Hyper CLT sheet (NETIS number: TH-250021-A) expands possibilities as a new option based on practical insights gained on-site and data support through collaboration with universities.

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

What is an Air Leak Tester? An "Air Leak Tester" is a device that pressurizes the inside (or outside) of a sealed workpiece with air and determines the presence of leaks based on pressure changes. When a master with no leaks and a workpiece with leaks are pressurized, the pressure on the workpiece side decreases, creating a pressure difference between the two. By measuring this pressure difference, the presence of leaks can be determined. Generally, differential pressure air leak testing is widely used, but Fukuda also offers products that utilize direct pressure leak testing and flow meters according to the leak rate, in addition to differential pressure leak testers. Since the air leak tester uses air as the measurement medium, it incurs no running costs and is environmentally friendly.

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.