Recommended for infection control! Introduction of non-contact sensors for facilities.

An automatic door sensor that opens only for people who want to enter without contact, whether on a busy street or in a narrow passage.

Energy-saving measures and infection control! Upgrade your facility environment with a non-contact light touch sensor! The 'HA-T401' can be configured to match the usage environment, allowing for touch area settings in four spots on the left, center, and right, as well as a total of 12 spots in four different configurations. You can open and close the automatic door just by bringing your hand close, ensuring hygiene and peace of mind without touching. When the light touch function is turned OFF, it can also be used as a wide-detection infrared sensor without a lens, and the ON/OFF status of the light touch function can be confirmed by the color of the standby LED. 【Features】 ■ Four spot settings to adapt to various door types ■ Non-contact solution for hygiene issues ■ Two setting modes that reduce unnecessary door openings and contribute to energy savings ■ Can also be used as a lens-free infrared sensor *For more details, please refer to the PDF document or feel free to contact us.

• Sensors
• Sensors

It's hygienic because you can open and close the door just by waving your hand without directly touching the doorknob or switch!

The "Exposed Waterproof Non-Contact Beam Switch for Automatic Doors PF-R5" is a hand-sensor that allows for easy adjustment of fine angle settings, and opens and closes the door when the beam of the built-in beam switch is blocked. It is suitable for hygienic environments such as food factories, medical facilities, and restaurant kitchen entrances. 【Features】 - Reduces the risk of virus infection by allowing door operation without contact - Three patterns of beam switches: front, downward, and left/right - Waterproof and dustproof (IP55 design) - Arrow mark indicates where to wave your hand - Can be mounted on a power switch box For more details, please download the catalog or contact us.

• Sensors
• Safety Door Switch

A non-contact switch of the exposed downward wide type that can open and close automatic doors by waving a hand without touching the main body.

You can open and close the door without directly touching the doorknob or switch, reducing the risk of virus and bacteria transmission. The "PF-R4" is an easy-to-use exposed downward wide-type hand-sensing sensor. By placing your hand under the sensor, you can open and close the door. It is suitable for places that prioritize hygiene, such as food factories, medical facilities, and restaurant kitchen entrances. ◎ For more details, please contact us.

• Sensors
• Safety switch
• Safety Door Switch

A built-in horizontal type non-contact switch that can open and close automatic doors by waving a hand without touching the main body.

You can open and close doors without directly touching doorknobs or switches, reducing the risk of viral infections in places where hygiene is a concern, such as food processing facilities and hospitals. The "PF-U2" is an exposed type horizontal hand-sensing sensor. For more details, please contact us.

• Sensors
• Safety switch
• Safety Door Switch

A non-contact switch of the exposed front-facing type that can open and close automatic doors by waving a hand without touching the body.

You can open and close the door without directly touching the doorknob or switch, reducing the risk of virus and bacteria infection. The "PF-R1" is an exposed front-facing type hand-sensing sensor. It is suitable for places that prioritize hygiene, such as food factories, medical facilities, and restaurant kitchen entrances. ◎ For more details, please contact us.

• Sensors
• Safety switch
• Safety Door Switch

It is hygienic because you can open and close the door just by waving your hand without directly touching the doorknob or switch! Avoid the risk of infection from viruses and bacteria!

The "Microwave Non-Contact Switch for Automatic Doors DHS-1" is a microwave hand-sensing sensor that allows you to open and close doors simply by waving your hand. It is suitable for hygienic environments such as food factories, hospitals, and nursing facilities. 【Features】 - Reduces the risk of virus infection by allowing door operation without contact. - The adoption of microwave technology significantly reduces malfunction due to condensation in environments with temperature differences, such as cold storage. - Waterproof and dustproof (IP55 design), allowing the main unit to be washed with water (note: the wall surface (back side) is not applicable). - LED display and response sound allow for easy confirmation of detection status at a glance. For more details, please download the catalog or contact us.

• Sensors
• Safety Door Switch

Just stepping into the entrance allows the automatic door to open and close! Recommended for places where hygiene is a concern, such as food processing factories and restaurant kitchens!

It is a non-contact switch that allows you to operate and open/close automatic doors at your feet, freeing up both hands and excelling in hygiene. The "PF-01S" is a slim vertical beam type foot switch with a wide opening. Its slim design allows for the installation of two foot switches at the same height, both inside and outside. The stainless steel panel is excellent in water resistance and chemical resistance, making it hygienic. ◎ For more details, please contact us.

• switch
• Sensors
• Sensors

Even with large surgical room sandals, the toes can open and close automatic doors! A foot switch of a thin, wide beam type with excellent hygiene.

The "PF-03S" is a slim switch that allows you to open and close automatic doors simply by placing your foot at the entrance. Since it is operated with your feet, both hands are free to use, making it recommended for use in places that prioritize hygiene, such as food factories, restaurants, and medical facilities, where keeping hands clean is important. The stainless steel panel is excellent in water resistance and chemical resistance, ensuring hygiene. The "PF-03S" has a slim design, allowing for the installation of two foot switches at the same height, both inside and outside. ◎ For more details, please contact us.

• switch
• Sensors
• Sensors

Standard foot switch with side light type, excellent in hygiene.

This is a slim switch that allows you to operate and open/close automatic doors with your feet, keeping both hands free and excelling in hygiene. The stainless steel panel is highly water-resistant and chemical-resistant, making it hygienic. The "PF-05" is a standard foot switch of the horizontal beam type. ◎ For more details, please contact us.

• switch
• Sensors
• Sensors

Deep learning high-speed facial recognition! Facial recognition speed under 0.2 seconds, facial recognition accuracy over 99%!

The "DS Series" is a high-speed facial recognition device that achieves faster facial recognition with high accuracy. Facial recognition speed is under 0.2 seconds, with an accuracy of over 99%! It can be used in various locations such as medical facilities, public facilities, environmental facilities, educational institutions, and office buildings, reducing the risk of virus and bacteria transmission as an entry and exit system. You can choose from three types according to your location and application. ■ Product Lineup 【Facial Recognition Terminal DS342】 - High-speed facial recognition with deep learning - Compact smartphone size - Supports mask recognition 【Facial Recognition Terminal (Felica compatible) DS372F】 - High-speed facial recognition with deep learning! Equipped with a Felica card reader - 7-inch tablet size ◎ For more details, please download the catalog or contact us.

• Surveillance Cameras
• Other safety equipment
• Entrance and exit control system

Just by holding your hand over the sensor, the solution is automatically sprayed. By linking with automatic doors, thorough hand disinfection is achieved!

The "PHW-03B" is an automatic liquid spray dispenser that detects when a hand is extended and sprays disinfectant. When combined with a wireless touch switch, it can wirelessly link with automatic doors. When the liquid is sprayed, a signal is transmitted to open the automatic door, ensuring thorough hand disinfection. 【Features】 ● The number of sprays can be selected to either one or two. ● Compatible bottle size: up to approximately D85×W95×H185–250mm. You can use your own bottles in addition to the dedicated ones. ● Recommended for entrances to restrooms in food-related facilities and factories where hygiene management is required. *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other safety and hygiene products

Unlike conventional mat-type sensors, this is a floor sensor that is less likely to be avoided by users because the detection area is not visible.

The 'Just Place It Pole-kun' is an infrared reflection-type bed exit sensor that can adapt to various environments. When the user gets out of bed, it notifies via a nurse call. Because it is wireless, it reduces the risk of cable disconnection and exiting the detection range. It is also less likely to detect curtain movements or bedding overflow, minimizing false alarms. 【Mat Sensor】 The risk of falls may actually increase as users try to avoid it. 【Conventional Infrared Sensor】 Setting the detection range, installation, and operation can be difficult. 【Just Place It Pole-kun】 - Since it uses infrared, it is invisible and less likely to be noticed by the user. - Installation is complete just by placing it! It has a simple design with only two operation switches. *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

• Safety Sensors

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without affecting the base material with heat. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

This time, the ACS-5000 is available as a facial recognition terminal compatible with FaceMe Security's add-on feature "Face Terminal," enabling access control management that combines "advanced anti-spoofing features" with high-speed facial recognition powered by edge AI. ■ Main Features 1. Accelerated Authentication Processing FaceMe Security is optimized for the MediaTek Genio 700's NPU, achieving faster facial recognition processing and reduced CPU load compared to processing solely on the CPU. It ensures stable authentication without delays even during peak times such as clocking in and out, contributing to alleviating congestion. 2. Advanced "Anti-Spoofing" Optimized for the IR + RGB camera mounted on the ACS-5000, it can quickly detect fraudulent authentication using photos, videos, or 3D masks within 0.6 seconds, ensuring reliable identity verification. 3. Door Control Without Additional Equipment FaceMe Security can directly control the digital I/O of the ACS-5000, allowing for the construction of an access control management system without the need for additional equipment. This simplifies system configuration and reduces implementation costs.

This is an air leak tester for battery cases of electric vehicles (EVs). The battery case has the characteristic of being "large with a significant internal volume, and its structure may deform due to internal pressure." As a result, air leak testing generates "noise caused by its large size and capacity" and "noise caused by expansion or deformation due to internal pressurization." To mitigate this noise, this device features a newly developed smoothing function and a linear fitting correction function used in combination during measurement. Additionally, to achieve low-pressure control that is difficult to manage and to expand flow for large volumes, we provide a bypass box (CBU-600) equipped with an electro-pneumatic regulator for precise pressure control and a pressurization valve with a large effective diameter to supply high flow rates. Measurement methods: Work-Work comparison, Work-Master comparison, Fixed Master comparison Measurement pressure range: 10 kPa, 20 kPa, 50 kPa (depending on specifications) Gauge pressure sensor accuracy: ±2% F.S. Differential pressure sensor accuracy: ±0.5% F.S. Group settings: 0 to 31 groups Power supply voltage / Power consumption: AC100 to 240 V / 100 VA

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!