The content of an interview with our company conducted by students was featured in the "Intour" program!

Reduce costs to less than one-tenth! Prevent deterioration from red rust in pipes and extend the lifespan of pipes for over 40 years! Red rust prevention device for pipes 'NMR Pipe Protector'

Prevention of red rust deterioration in water supply pipes, air conditioning pipes, and hot/cold water piping. It has been adopted in over 4,300 buildings, including Buckingham Palace and Kumamoto Japanese Red Cross Hospital! <Recommended Points> ★ Significant cost reduction (over 90% reduction in piping renewal costs) ★ No need to cut pipes ★ No need for facility shutdown without water outage work ★ Excellent safety as the equipment does not come into direct contact with water Especially recommended for facilities that cannot stop operations, such as hospitals, hotels, and shopping centers! *Free PDF materials available, including cost comparison charts and customer testimonials! *Please feel free to contact us first.

• Piping Materials

Confirmed the rust prevention effect inside the piping in areas where the NMR pipe protector's rust prevention effect conditions are met.

To demonstrate the rust prevention effect of the NMR pipe protector, a certain amount of water must flow through the piping. In the Konan Chuo area where the rust prevention effect test was conducted, the minimum water usage for a 50A pipe was 4.4 tons per day, but only three households were using that water, resulting in a total water usage of 1 ton per day (an average of 350 liters per day per household), which is very low. In the Teramachi 2-chome area, the number of households using water for each branched pipe with a diameter of 50A was six and eight, respectively, with the six households using about 2 tons of water per day and the eight households having a total water usage of just under 3 tons per day. Due to insufficient water usage, a clear rust prevention effect could not be confirmed. However, in the Tsurumi Public Housing and Hazawa area, where similar verification tests were conducted, the conditions were met. In Tsurumi Public Housing, the red rust in the water supply pipe decreased from 0.27 mg/l to 0.12 mg/l six weeks after the installation of the NMR pipe protector, and an increase in residual chlorine concentration, which had been reduced due to red rust, was confirmed. In the Hazawa area, the residual chlorine concentration, which had decreased by 45.3%, improved significantly to a reduction of 13.6%. The Yokohama City Waterworks Bureau has concluded the tests as there are no more suitable locations to further test the rust prevention effect of the NMR pipe protector.

• Water treatment equipment

Extend the life of your current water pipes and air conditioning pipes for over 40 years! By converting red rust to black rust, we can rehabilitate the pipes and eliminate the need for expensive pipe replacements.

■Features - Cumulative installation record of over 4,400 buildings as of July 2025 - Extends the lifespan of water pipes for over 40 years, until the building's lifespan - Installation costs are about 1/5 to 1/10 of pipe renewal construction - Patented in Japan and the United States, registered in the Ministry of Land, Infrastructure, Transport and Tourism's NETIS new technology utilization system - No need for water outages, no running costs (electricity or chemicals) - Installed on the outside of pipes, allowing for short-term installation and ensuring hygiene - Comes with a product warranty ■Product Overview By converting red rust that occurs inside old pipes into black rust, we improve and strengthen the pipes, rehabilitating them. It also prevents the new occurrence of red rust. Red rust deteriorates pipes, while black rust has completely different properties. Black rust is smaller in volume, more robust, and insoluble in water, which strengthens the pipes and extends their lifespan by over 40 years. Typically, the lifespan of pipes is shorter than that of buildings (around 20 years), but it can be extended to match the building's lifespan without expensive pipe renewal. ■ Japan System Planning Co., Ltd. ■ Toll-Free Number: 0120-320-390 Official Website: https://www.jspkk.co.jp/jp/contact/

• Piping Materials
• Water treatment equipment
• others

Extend the lifespan of piping! Case study of the "NMR Pipe Protector" introduced at Christ's College, Cambridge University.

Christ's College, Cambridge University, originated from God's House, which was established in 1437, and was rebuilt and opened as Christ's College in 1505 at nearly the same location. It is also famous for producing numerous notable alumni, including Charles Darwin, the author of "On the Origin of Species." The university's air conditioning hot water piping has been troubled by issues related to red rust internally, and although sacrificial anodes were introduced in 2008 as a countermeasure, the progression of red rust did not stop. Additionally, an anti-corrosion agent was applied annually, but there was no change in the iron content of the water before and after its use, raising concerns about the agent's impact on human health. Therefore, to remove red rust and single-celled bacteria while maintaining the strength of the piping, an NMR pipe protector was installed on July 31, 2013, in the air conditioning hot water piping (return pipe) of the Todd Building on the university campus. The iron content in the water, which was 43.81 mg/l before installation, dropped to 17.95 mg/l three weeks after installation. As October arrived and the air conditioning hot water system operated at full capacity, the levels continued to decrease, reaching 0.5195 mg/l by August 5, 2014, 52 weeks after installation, which is about one-eighty of the original level.

• Water treatment equipment

Extending the lifespan of piping! Case study of the "NMR Pipe Protector" at City, University of London.

London City University, located in North London, is one of the famous universities in the city. It uses SGP for its air conditioning hot water piping, and the pipes in buildings over 40 years old were experiencing red rust corrosion. To completely protect the piping from red rust corrosion, NMR pipe protectors were installed. Before installation, the iron content in the water due to red rust was 3.407 mg/l, but two weeks after installation, the iron content decreased to 0.084 mg/l. This demonstrated that the NMR pipe protectors prevented the occurrence of new red rust in the pipes and reduced existing red rust to inert black rust. With the conversion of red rust to black rust, the piping was completely protected from red rust corrosion, allowing the air conditioning hot water piping to be usable for over 40 years. ▼ For more details, please see the related link ▼

• Piping Materials

The results of verifying the red rust prevention device "NMR Pipe Protector" for hot water supply piping showed a significant cost reduction in piping renewal expenses to 1/50.

The Royal Garden Hotel London is beloved by travelers from around the world as one of the world's leading five-star hotels. Constructed in 1965, by 2007, it had been 42 years since its establishment, and the deterioration of the hot water supply pipes had progressed. Due to the use of iron pipes, internal red rust corrosion had advanced, resulting in relatively dark red water coming out of the taps every morning. In response, three "NMR Pipe Protectors" were installed on the main hot water supply pipe in the boiler room. Furthermore, water quality tests were conducted before installation, two weeks after installation, and then monthly for 12 months to measure the iron content in the water due to red rust. The results showed a significant decrease in the iron content in the water immediately after installation. Since the effectiveness of rust prevention was quantitatively proven, the hotel also installed NMR Pipe Protectors in the air conditioning piping. Ultimately, while the cost of pipe replacement was approximately 1.5 billion yen, the total cost of the NMR Pipe Protectors was about 30 million yen, resulting in a cost that was 1/50 of the replacement cost. In terms of cost-effectiveness, it far exceeded the hotel's expectations. *Customer testimonials (customer recommendation letters) and other PDF materials are currently available for free! *Please feel free to contact us first.

• others

The Royal Bank of Scotland confirmed the rust prevention and lifespan extension effects of NMR pipe protectors for air conditioning piping, reducing piping renewal costs to less than one-tenth.

As an example of the introduction of the "NMR Pipe Protector," we present the case of the Royal Bank of Scotland. Branch 250 had been in operation for 18 years and was facing issues with red rust in the air conditioning hot water piping. Due to the high costs of rust inhibitors and a shift towards environmental considerations, the "NMR Pipe Protector" was installed in the air conditioning hot water piping in March 2018. As a result of the installation, the iron content value from red rust in the hot water, which was 1.10 mg/L before installation, was re-examined 9 weeks after the installation of the NMR Pipe Protector, revealing that the hot water was clear and the amount of dissolved iron in the hot water had decreased to approximately 1/3, or 0.41 mg/L. The progression of red rust within the piping also stopped, and the red rust had transformed from a surface state to black rust. The NMR Pipe Protector successfully resolved the issue of red rust dissolving into the water and halted its progression. There is now no longer a concern about the acceleration of piping deterioration due to red rust. Additionally, the coating from black rust has a reinforcing effect on the piping, and it is expected to extend the lifespan of the piping to match the lifespan of the building. *Customer feedback (customer testimonials) and other PDF materials are currently available for free! *Please feel free to contact us first.

• others

The London City Hall used the rust prevention device "NMR Pipe Protector" to convert red rust in the hot water supply pipes to black rust, verifying the effectiveness of preventing red rust and extending the lifespan of the pipes.

The "NMR Pipe Protector" has garnered attention worldwide for its ability to solve the problem of red rust. Every morning, red water would come out from the hot water pipes in Guildhall, London. When we measured the iron content in the water, it was found to be 6.36 mg per liter, indicating significant red rust, which is considerably higher than the water quality standard of 0.2 mg per liter set by UK water regulations. Three weeks after installing the NMR Pipe Protector, the iron content in the water was measured at 0.015 mg per liter. This is a reduction to 1/400 of the iron content before installation, and further measurements taken seven weeks after installation showed a decrease to 0.007 mg per liter, which is less than half of the value three weeks after installation, proving that the red rust had transformed into insoluble black rust in the water. As a result of the drastic reduction in iron content, the red water was eliminated. The existing red rust was reduced to black rust, which strengthened the piping. As long as the building continues to exist, the piping can continue to be used. With the red rust problem in the hot water pipes of Guildhall, London resolved, a letter of recommendation was issued. *We are currently offering free PDF materials such as customer testimonials (customer recommendation letters)!

• others

Effective for concerns such as "decreased air conditioning efficiency," "increased pump load," and "rising electricity costs" due to red rust in the piping... Boost productivity efficiency!

~Do you have any of these concerns?~ ■High electricity bills... ■Poor air conditioning efficiency... ■Machines not working well... It might be due to red rust in the pipes... Transform your pipes into "rust-free pipes" with the "NMR Pipe Protector" and extend the lifespan of even old pipes! No worries about business interruptions due to water outages or lost opportunities from line stoppages that are essential for pipe renewal! ~Many factory case studies available~ ★Major DPE factory ★Major automobile manufacturer factory ★Food processing factory in Shizuoka Prefecture *You can download the materials for free. *Please feel free to contact us first.

• Piping Materials

Replace everything when it gets old? You’ll regret it if you don’t know! A gentle management method for piping and the reasons behind it. New anti-corrosion technology for piping!

<Aren't you misrecognizing something?> - There won't be any red water, so it's fine, right... - If it's VLP pipes or anti-corrosion cores, there won't be rust, so it's okay... - For now, we're cleaning the pipes, so it should be fine... - If they get old, we'll just have to replace everything, right... = Knowledge is definitely beneficial = - Examples of red rust problems caused by pipes seen in images - What is "black rust" that completely solves the red rust issue? - The chemical change "reduction" that converts red rust to black rust - Pipe-friendly management methods and the reasons behind them *You can download the materials for free. *Please feel free to contact us first.

• Water treatment equipment

Old piping is likely to suddenly cause multiple leaks even with a small earthquake. Large-scale replacement work for the piping can lead to significant damage... What measures can be taken now?

Are you aware? The lifespan of piping is said to be about 20 years. At first glance, piping is often overlooked because it is not visible from the outside, but like buildings, it continues to deteriorate over time. Furthermore, in recent years, the majority of equipment damage caused by earthquakes has been due to "piping within buildings," such as air conditioning systems. Sudden leaks caused by earthquakes can occur in multiple locations and result in significant damage... Once a leak occurs, it requires a large-scale construction cost for "piping replacement (piping renewal)." To prevent accidents before they happen, we recommend the NMR Pipe Protector! ★ Just by installing it on the outside of the piping, it extends the lifespan of the piping and strengthens the interior! ★ = Maximum Benefits = - The initial cost is less than one-tenth of that for piping renewal - Running costs and maintenance are "zero" - High safety that is also implemented in food factories and hospitals Please feel free to contact us first.

• Water treatment equipment

We have published numerous costs for when you actually implement it. We will provide a "cost comparison table" that clearly shows the comparison with the costs of updating piping!

~For those who are troubled by such issues~ ■ I don't have the money to rebuild or update the plumbing... ■ I want to quickly address the red water and plumbing clogs... ■ Water outage construction is quite a hassle... ★ Please download and view the PDF materials for the 'Case Studies' below. ★ Feel free to contact us if you want to know a rough estimate of the costs!

• Piping Materials

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

***Contract Processing Now Accepting Orders*** We can accommodate small lots and a variety of sample tests, including spray drying with organic solvents. Please feel free to contact us. ----Example of a Prototype Schedule---- 9:30 Pre-test Meeting 10:00 Spray Drying Test Starts 12:00 Lunch Break 13:00 Spray Drying Test Resumes 16:00 Post-test Meeting

【Period: Ongoing until May 31, 2026】 Now 20% OFF! For orders of 10 or more: Dry T-shirts @ 1,600 yen (tax included) Dry polo shirts @ 2,000 yen (tax included) (Price includes the garment and one print location) * For sizes 3L and above, an additional 550 yen * An additional 550 yen for each additional print location Design and data production fees are required separately. (No fee for complete data submission) We accept orders for various purposes such as events, teams, goods, souvenirs, and gifts, from one piece to mass production. We also have many other garments not listed. Please feel free to inquire.

We have announced the "piCOBOT Electric (Standard I/O)," an electric vacuum gripper compatible with most collaborative robot brands. It enables clean and energy-efficient automation without the need for compressed air, simplifying equipment configuration while improving energy efficiency. It supports various collaborative robot brands, allowing for flexible automation. With a universal Standard I/O interface, smooth integration with major collaborative robots is possible. Additionally, its lightweight and compact design maximizes the robot's portability. By combining it with various suction cups and accessories from Piab, you can build a flexible handling system that accommodates diverse workpieces. Read the article here: https://www.piab.com/ja-jp/news/piab-launches-picobot-electric--all-electric-vacuum-gripping-for-any-cobot-brand

This column is a special series consisting of 12 installments themed around user manuals. In the first installment, we will focus on the often-overlooked "risks of postponing the user manual" in relation to CE marking compliance. In the process of obtaining CE marking, attention is often concentrated on design and safety measures, leading to cases where the preparation of the user manual is delayed. However, in practice, deficiencies in the user manual can lead to the following issues: - Rejection just before the review - Increased costs due to design revisions - Schedule delays - Product liability (PL liability) risks after shipment Even if CE marking is obtained, it is important to be aware that insufficient information provision can leave risks associated with the product.