Online seminar on the utilization of the latest thermal fluid analysis software and turbo design software.

Simulate the flow characteristics of valves and volumetric pumps! A CFD software specialized in valves and pumps, which other CFD software struggles with!

SimericsMP+ is a fluid simulation tool designed to calculate the transient characteristics of various valves, volumetric pumps, and compressors. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances on the order of micrometers, which is difficult for other general-purpose fluid analysis software!! In addition to valve analysis, there has been an increase in achievements for automotive and construction machinery oil pumps, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, please see the actual mesh creation and movement in a demo presentation!!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Not only applicable to hydraulic circuits such as engines and transmissions, but also has numerous applications in the analysis of oil cooling, water cooling, and air cooling circuits for motors and batteries!

PumpLinx is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque Recently, there has been an increase in projects for oil cooling analysis of motors for automobiles, and when solving the VOF method with other CFD software, we have received inquiries such as: - Analysis time is too long - It is difficult to create fine calculation meshes - The solution diverges and does not converge Development source's SAE presentation paper on motor oil cooling: https://saemobilus.sae.org/content/2020-01-0168/

• simulator
• Thermo-fluid analysis
• Contract Analysis

Not only applicable to hydraulic circuits such as engines and transmissions, but also has numerous application results in the analysis of oil cooling, water cooling, and air cooling circuits for motors and batteries!

PumpLinx is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, please see a demo presentation for the actual mesh creation and movement!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulate the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

SimericsMP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication becoming more common. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a demo!

• Thermo-fluid analysis

Simulating the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

SimericsMP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the micrometer range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in applications for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement through a demo presentation!!

• Thermo-fluid analysis

Simulating the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

SimericsMP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow fields (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement through a demo presentation!

• Thermo-fluid analysis

Simulating the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

SimericsMP+ is a fluid simulation tool for calculating the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation, water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see the actual mesh creation and movement in a demo presentation!!

• Thermo-fluid analysis

Simulating the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

SimericsMP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery applications, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, please see the actual mesh creation and movement in a demo presentation!

• Thermo-fluid analysis

Simulating the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

SimericsMP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the micrometer range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVT, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, please see the actual mesh creation and movement in a demo presentation!!

• Thermo-fluid analysis

Simulating the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

SimericsMP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery applications, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a demo!

• Thermo-fluid analysis

Simulate the flow characteristics of valves and volumetric pumps! A CFD software specialized for valves and pumps that other CFD software struggles with!

SimericsMP+ is a fluid simulation tool designed to calculate the transient characteristics of various valves, volumetric pumps, and compressors. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque Its greatest strength is the ability to automatically create meshes even for clearances on the order of micrometers, which is difficult for other general-purpose fluid analysis software! In addition to valve analysis, there has been an increasing number of achievements in oil pumps for automobiles and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, please see a demo for the actual mesh creation and movement!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Introducing a simulation of a check valve (non-return valve) as an example of fluid analysis.

CFD, which allows for the shortening of product development periods, reduction of prototyping costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. Check valves (non-return valves) play an important role in preventing water hammer and regulating flow direction. Research and development are ongoing daily to enhance the durability of piping. However, this requires spending a lot of cost and time on prototyping and testing the valves. Additionally, even when performing CFD simulations, setting up the mesh deformation associated with the opening and closing of flow paths can be quite cumbersome. With Simerics' CFD, high-performance template meshes are provided, and the movement and deformation of the computational mesh that occurs during calculations are fully automated, allowing anyone to easily and quickly generate meshes. This is expected to significantly reduce labor and costs! There are still many reasons to use Simerics' CFD software. You can find more details through the link below or feel free to contact us anytime!

• simulator
• Thermo-fluid analysis
• Contract Analysis

If you're using software that claims to be able to analyze but actually can't, or software that can do it but takes too much effort for tasks like mesh creation, it's better to switch!

SimericsMP+ is a fluid simulation (CFD) software that excels in analyzing various volumetric pumps, compressors, and valves, specifically for calculating the transient characteristics of fluids. 【The following fluid analyses (CFD) are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow fields (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the micrometer range, such as between gear pump teeth! While other software may take time for model creation like mesh generation, SimericsMP+ can complete the analysis in that time. Utilize specialized tools for time-saving as part of work style reform! *There is a lot of information that cannot be posted online. Particularly, the actual mesh creation and movement should definitely be demonstrated in a demo! User case studies https://www.wavefront.co.jp/CAE/PumpLinx/interview.html

• Thermo-fluid analysis

Introducing a simulation of a check valve (non-return valve) as a case study in fluid analysis.

CFD allows for the shortening of product development periods, reduction of prototyping costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. Check valves (non-return valves) play an important role in preventing water hammer and regulating flow direction. Research and development are ongoing daily to enhance the durability of piping. However, this requires spending a lot of time and costs on prototyping and testing the valves. Even when performing CFD simulations, setting up the mesh deformation associated with the opening and closing of flow paths can be quite labor-intensive. With Simerics' CFD, high-performance template meshes are provided, and the movement and deformation of the computational mesh that occurs during calculations are fully automated, allowing anyone to easily and quickly generate meshes. This is expected to significantly reduce man-hours and costs! There are many more reasons to use Simerics' CFD software. You can find more details through the link below or feel free to contact us anytime!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulate the flow characteristics of valves and volumetric pumps! A CFD software specialized for valves and pumps that other CFD software struggles with!

PumpLinx is a fluid simulation tool for calculating the transient characteristics of various valves, volumetric pumps, and compressors. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! In addition to valve analysis, there has been an increase in achievements with oil pumps for automotive and construction machinery applications, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement through a demo presentation!!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Fluid analysis software for gear pumps, vane pumps, and other positive displacement pumps! CFD software specialized for pumps that other CFD software struggles with!

PumpLinx is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication becoming more common. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a live demo!!

• Thermo-fluid analysis

Fluid analysis software for gear pumps, vane pumps, and other positive displacement pumps! A CFD software specialized for pumps that other CFD software struggles with!

PumpLinx is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication becoming more common. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a demo!

• Thermo-fluid analysis

Fluid analysis software for positive displacement pumps such as gear pumps and vane pumps! CFD software specialized for pumps that other CFD software struggles with!

PumpLinx is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, please see a demo for the actual mesh creation and movement!

• Thermo-fluid analysis

Not only applicable to hydraulic circuits such as engines and transmissions, but also has numerous achievements in the analysis of oil-cooled, water-cooled, and air-cooled circuits for motors and batteries!

PumpLinx is a fluid analysis software designed to calculate the transient characteristics of various positive displacement pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP, and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a demo presentation!!

• Thermo-fluid analysis

Not only applicable to hydraulic circuits such as engines and transmissions, but there are also numerous achievements in the analysis of oil cooling, water cooling, and air cooling circuits for motors and batteries!

PumpLinx is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, as well as trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement through a demo presentation!!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Introduction to the simulation of floodway driving as a case study of free surface analysis.

In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. In particular, in Japan, there are many instances of flooding, and there are situations where we must drive on submerged roads. Creating vehicles that can withstand flooded road conditions has become one of the important challenges in automotive development, but this requires spending a lot of cost and time on prototype manufacturing and testing. CFD simulations tend to become large-scale and take a long time to compute, but with Simerics' CFD, high-performance free surface fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid results. The complex engine compartment is also modeled in detail, reproducing conditions close to actual experiments. Of course, changes in water depth and driving speed are also easily possible. From these calculation results, we can understand the pathways and amounts of water intrusion, providing feedback for shape design and preventing damage and electric shock. There are still many reasons to use Simerics' CFD software. You can find more details through the link below or feel free to contact us anytime!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulating the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

SimericsMP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a demo presentation!!

• Thermo-fluid analysis

Introducing a simulation of the water flow in a flush toilet, which is an example of a free surface.

In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. The water-flushing toilet that we commonly use involves various considerations in its design, not only regarding the cleaning power but also concerning water splashing and water conservation, even for something as simple as flushing water. To achieve this, it requires not only optimal shape ideas but also repeated trial and error regarding where and how much water to flow. However, doing so necessitates spending significant costs and time on toilet prototypes and experiments. With Simerics' CFD, high-performance free surface fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid results. It also enables highly detailed modeling, which can replicate conditions close to actual experiments. From these computational results, we can accurately understand the flow of water, leading to significant reductions in labor and costs! There are still many reasons to use Simerics' CFD software. You can find more details through the link below or feel free to contact us anytime!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

SimericsMP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a demo!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Introducing a simulation of a check valve (non-return valve) as an example of fluid analysis.

CFD provides detailed data that is difficult to obtain through experiments, helping to shorten product development periods and reduce prototyping costs. In this article, we will introduce application examples that can assist in product development using Simerics' CAE/CFD software. Check valves (non-return valves) play an important role in preventing water hammer and regulating flow direction. Research and development are ongoing daily to enhance the durability of piping. However, this requires spending a lot of time and costs on prototyping and testing the valves. Even when performing CFD simulations, setting up mesh deformation due to the opening and closing of flow paths can be quite cumbersome. With Simerics' CFD, high-performance template meshes are provided, and the movement and deformation of the computational mesh that occurs during calculations are fully automated, allowing anyone to easily and quickly generate meshes. This is expected to significantly reduce man-hours and costs! There are still many reasons to use Simerics' CFD software. You can find more details through the link below or feel free to contact us anytime!

• simulator
• Thermo-fluid analysis
• Contract Analysis

An interview on fluid analysis of internal gear pumps using Pumplinx at Aisin Seiki Co., Ltd.

We have published an interview on how Aisin Seiki transitioned to PumpLinx and how it is being utilized. Please take a look.

• Thermo-fluid analysis
• Contract Analysis

Simulating the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement through a demo presentation!!

• Thermo-fluid analysis

Introducing a simulation of an internal gear pump, which is an example of fluid analysis.

CFD allows for the shortening of product development periods, reduction of prototype costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. One common component used in hydraulic machinery, such as automotive oil pumps, is the internal gear. Research and development is continuously conducted to enhance the efficiency of transporting hydraulic fluid. However, this requires significant time and cost for prototyping and testing the oil pump. Additionally, even when performing CFD simulations, generating the computational mesh for the gear teeth can be quite labor-intensive. With Simerics' CFD, high-performance template meshes are provided, and the deformation of the computational mesh that occurs during calculations is fully automated, allowing anyone to easily and quickly generate meshes. This is expected to significantly reduce labor and costs! There are many more reasons to use Simerics' CFD software. You can find more details through the link below, or feel free to contact us anytime!

• simulator
• Thermo-fluid analysis
• Contract Analysis

If you're using software that claims to be able to analyze but actually can't, or software that can do it but takes too much effort for tasks like mesh creation, then it's time to switch!

SimericsMP+ is a fluid simulation (CFD) software that excels in analyzing various volumetric pumps, compressors, and valves, specifically for calculating the transient characteristics of fluids. 【The following fluid analyses (CFD) are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the micrometer range, such as between gear pump teeth! While other software may take time for model creation like mesh generation, SimericsMP+ can complete the analysis in that time. Utilize specialized tools for time savings as part of work style reform! *There is a lot of information that cannot be posted online. Particularly, the actual mesh creation and movement should definitely be demonstrated in a demo! User case studies https://www.wavefront.co.jp/CAE/PumpLinx/interview.html

• simulator
• Thermo-fluid analysis
• Contract Analysis

Introducing a simulation of a vortex pump (centrifugal pump), which is an example of fluid analysis.

CFD provides a way to shorten product development periods and reduce prototyping costs, as well as obtain detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. Centrifugal pumps, which utilize centrifugal force to draw up liquids, are widely used for water supply and irrigation, as well as for general industrial applications. An important challenge in the design process is that, due to the principle of expelling liquid with centrifugal force, cavitation tends to occur easily. Research and development are continuously conducted to suppress this and enhance pump efficiency and durability. However, this requires spending a lot of time and costs on prototyping and experimenting with centrifugal pumps. With Simerics' CFD, multiple cavitation models can be used, and erosion prediction is also possible, allowing for accurate and physically meaningful simulations! This is expected to significantly reduce labor and costs! There are still many reasons to use Simerics' CFD software. You can find more information through the link below or feel free to contact us anytime!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Fluid analysis software for positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

PumpLinx is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vector, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in applications for automotive and construction machinery oil pumps, with examples such as vane pumps for power steering and CVTs, as well as trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement through a demo presentation!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulate the flow characteristics of volumetric pumps such as vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see a demo for the actual mesh creation and movement!!

• Thermo-fluid analysis

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, we encourage you to see the actual mesh creation and motion through a demonstration!

• Thermo-fluid analysis

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for gear pumps, which other CAE software struggles with!

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, as well as trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement through a demo presentation!!

• Thermo-fluid analysis

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for gear pumps, which other CAE software struggles with!

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication. *There is a lot of information that cannot be posted online. Particularly, the actual mesh creation and movement should definitely be demonstrated in a demo!

• Thermo-fluid analysis

Fluid analysis software for volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

PumpLinx is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement in a demonstration!

• Thermo-fluid analysis

Simulate the flow characteristics of volumetric pumps such as vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

PumpLinx is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in applications for oil pumps used in automobiles and construction machinery, with examples including vane pumps for power steering and CVTs, as well as trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, we encourage you to see the actual mesh creation and movement through a demo presentation!!

• Thermo-fluid analysis

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automobiles and construction machinery, with examples including vane pumps for power steering and CVTs, as well as trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement in a demo presentation!!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery applications, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a demo!

• Thermo-fluid analysis

Introducing a simulation of a check valve (non-return valve) as an example of fluid analysis.

CFD, which allows for the shortening of product development periods, reduction of prototype costs, and acquisition of detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. Check valves (non-return valves) play an important role in preventing water hammer and regulating flow direction. Research and development are being conducted daily to enhance the durability of piping. However, this requires significant time and cost for prototyping and testing the valves. Additionally, even when performing CFD simulations, setting up the mesh deformation associated with the opening and closing of flow paths can be quite labor-intensive. With Simerics' CFD, high-performance template meshes are provided, and all the mesh deformation that occurs during computation is automated, allowing anyone to easily and quickly generate meshes. This is expected to significantly reduce labor and costs! There are many more reasons to use Simerics' CFD software. You can find more details through the link below or feel free to contact us anytime!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool for calculating the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement through a demonstration!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulate the flow characteristics of volumetric pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be published online. Especially, please see a demonstration for the actual mesh creation and movement!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulating the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CAE software specialized for pumps that other CAE software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in applications for automotive and construction machinery oil pumps, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, we encourage you to see the actual mesh creation and movement through a demo presentation!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulate the flow characteristics of positive displacement pumps such as gear pumps and vane pumps! A CFD software specialized for pumps that other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, please see a demo presentation for the actual mesh creation and movement!!

• Thermo-fluid analysis

It is possible to perform everything from mesh generation to analysis and post-processing in the same environment!

Simerics MP+ is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variations of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The biggest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult with other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples including vane pumps for power steering and CVTs, as well as trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see a demo for the actual mesh creation and movement!!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Simulate the flow characteristics of valves and volumetric pumps! A CFD software specialized in valves and pumps, which other CFD software struggles with!

Simerics MP+ is a fluid simulation tool designed to calculate the transient characteristics of various valves, pumps, and compressors. It is developed based on the thermal fluid simulation tool Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! In addition to valve analysis, there has been an increase in achievements with oil pumps for automotive and construction machinery, such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, please see the demo for actual mesh creation and movement!!

• simulator
• Thermo-fluid analysis
• Contract Analysis

It offers ease of use and multifunctionality to meet a wide range of needs, from beginners to experts in CFD analysis.

Simerics MP+ is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsation and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes with clearances in the µm range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with examples such as vane pumps for power steering and CVTs, and trochoidal pumps for engine lubrication. *There is a lot of information that cannot be posted online. In particular, please see the actual mesh creation and movement through a demo presentation!!

• Thermo-fluid analysis

Fluid analysis software for gear pumps, vane pumps, and other positive displacement pumps! CAE software specialized for pumps that other CAE software struggles with!

Simerics MP+ is a fluid analysis software designed to calculate the transient characteristics of various volumetric pumps, compressors, and valves. It is developed based on the thermal fluid analysis software Simerics MP and utilizes all the features of Simerics MP. 【The following fluid analyses are possible】 ■ Free surface flow ■ Flow considering the compressibility of air contained in liquids ■ Pressure pulsations and water hammer effects ■ Coupling of pump flow with the rigid body motion of valves and cam rings ■ Flow in low to medium vacuum conditions ■ Compressible flow (subsonic) ■ Cavitation ■ Time variation of flow field (velocity vectors, pressure), flow rate, fluid forces, and torque The greatest strength is the ability to automatically create meshes even for clearances in the micrometer range, which is difficult for other general-purpose fluid analysis software!! Recently, there has been an increase in achievements for oil pumps used in automobiles and construction machinery, with more examples such as vane pumps for power steering and CVTs, and trochoid pumps for engine lubrication. *There is a lot of information that cannot be posted online. Especially, the actual mesh creation and movement should definitely be demonstrated in a demo!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Advanced analysis can be easily performed on SOLIDWORKS! For shortening development time and reducing costs.

"Simerics MP for SOLIDWORKS" is a CAD-integrated thermal fluid analysis software that can be operated within SOLIDWORKS. Integrated into the SOLIDWORKS GUI, designers can perform everything from design to analysis themselves. The calculation settings are also simple, allowing for quick mastery of the operation. By enabling designers to conduct various analyses that were traditionally outsourced, such as optimal shape investigation, problem cause identification, and performance verification, it leads to reduced development time, improved quality, and cost savings. 【Features】 ■ Supports a wide range of simulations including flow, turbulence, heat conduction, and heat convection ■ Automatically generates calculation meshes directly from CAD surfaces ■ Extremely fast, accurate, and robust solver ■ Stable iterative calculations for very challenging problems such as micro-meter scale shapes ■ Accurate calculation results that show excellent correlation with physical tests *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other CAD related software
• Thermo-fluid analysis
• Contract Analysis

Advanced analysis can be easily performed on SOLIDWORKS! For shortening development time and reducing costs!

"Simerics MP for SOLIDWORKS" is a CAD-integrated thermal fluid analysis software that can be operated within SOLIDWORKS. Integrated into the SOLIDWORKS GUI, designers can perform everything from design to analysis themselves. The calculation settings are also simple, allowing for quick mastery of the operation. By enabling designers to conduct various analyses that were traditionally outsourced, such as optimal shape consideration, problem identification, and performance verification, it leads to reduced development time, improved quality, and cost savings. 【Features】 ■ Supports a wide range of simulations including flow, turbulence, heat conduction, and convection ■ Automatically generates calculation meshes directly from CAD surfaces ■ Extremely fast, accurate, and robust solver ■ Stable iterative calculations for very challenging problems such as micro-meter scale shapes ■ Accurate calculation results that show excellent correlation with physical tests *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Other analyses

Advanced analysis can be easily performed on SOLIDWORKS! For shortening development time and reducing costs!

"Simerics MP for SOLIDWORKS" is a CAD-integrated thermal fluid analysis software that operates within SOLIDWORKS. Integrated into the SOLIDWORKS GUI, designers can perform everything from design to analysis themselves. The calculation settings are simple, allowing for quick mastery of the operation. By enabling designers to conduct various analyses that were traditionally outsourced, such as investigating optimal shapes, identifying problem causes, and verifying performance, it leads to reduced development time, improved quality, and cost savings. 【Features】 ■ Supports a wide range of simulations including flow, turbulence, heat conduction, and convection ■ Automatically generates calculation meshes directly from CAD surfaces ■ Extremely fast, accurate, and robust solver ■ Stable iterative calculations for very challenging problems, such as micro-scale geometries ■ Accurate calculation results that show excellent correlation with physical tests *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• 3D CAD
• Other CAD related software
• Other analyses

Introduction to the simulation of a shell-and-tube heat exchanger, an example of thermal fluid analysis.

CFD provides a means to shorten product development periods, reduce prototyping costs, and obtain detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can assist in product development using Simerics' CAE/CFD software. Heat exchangers have various applications, including boilers, steam generators, and commonly in air conditioners, refrigerators, and automotive radiators. While it is essential to enhance heat transfer efficiency, there is also a demand for miniaturization, requiring various trial and error in the design process. However, designing requires significant time and costs for prototyping and experiments. In CFD simulations, computation time can often increase depending on the shape of the shell and the number of tubes. However, with Simerics' CFD, high-performance thermal fluid analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid acquisition of results. The interior of the shell is also modeled in detail, replicating conditions close to actual experiments. This is expected to lead to significant reductions in man-hours and costs! There are many more reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Introduction to airflow simulation in the engine room as a case study of flow analysis.

CFD provides a way to shorten product development time, reduce prototyping costs, and obtain detailed data that is difficult to measure through experiments. In this article, we will introduce application examples that can be useful for product development using Simerics' CAE/CFD software. To prevent a car from overheating, it is necessary to intake air into the engine room and cool various components, making the design of the grille shape and ventilation parts crucial. Additionally, the grille not only serves a cooling function but also represents the car's "face," making it an important aspect of its appearance. Despite being such an important part, designing it requires significant time and costs for prototyping and experimentation. CFD simulations can also become large-scale, often leading to longer computation times; however, with Simerics' CFD, high-performance flow analysis can be processed quickly through large-scale parallel computing, allowing for easy and rapid results. It also models the complex engine room in detail, recreating conditions close to actual experiments. This can lead to significant reductions in labor and costs! There are many more reasons to use Simerics' CFD software. Please check the link below or feel free to contact us!

• simulator
• Thermo-fluid analysis
• Contract Analysis

Nitto Kohki will hold the "2025 Attack Fair in Meiko" for two days from July 23 (Wednesday) to July 24 (Thursday), 2025, at the "Kowa Seminar Plaza 2F Training Room NO.12 (inside Kowa Sports Land)." The Attack Fair is an exhibition where you can actually "see, touch, and operate" Nitto Kohki's products. Additionally, there will be wonderful souvenirs for attendees and many fun activities planned. We look forward to welcoming everyone!

Our company will be exhibiting at the "16th Advanced Functional Materials Week Tokyo" held at Makuhari Messe, specifically at the "8th Coating Japan: Paints and Coating Equipment Exhibition." This exhibition is a specialized event where functional paints, coating equipment, surface treatment technologies, and more will be showcased all in one place. A wide range of engineers from industrial fields such as electronics and automotive to architecture and building materials will be in attendance. At this exhibition, you can discover new products and technologies, consult directly with engineers, discuss estimates and implementation timelines, and learn about industry trends. We sincerely look forward to your visit.

■Accelerating Next-Generation Polymer Design: Digital Chemistry Platform■ With the evolution of molecular simulation technology, we have entered an era where phenomena at the atomic and molecular levels can be reproduced and analyzed on computers. Furthermore, by combining this with machine learning, it has become possible to achieve high-precision material predictions and designs even with limited experimental data. Schrödinger strongly supports the enhancement of your analytical capabilities and the efficiency of research and development through cutting-edge molecular simulation and AI/ML technologies, as well as our unique digital platform that integrates these technologies. At this exhibition booth, our specialized staff will clearly introduce an overview of these technologies and case studies, and will also answer any questions you may have. *During the exhibition, we will hold a seminar at our booth. Location: Our exhibition booth Theme: Accelerating Next-Generation Polymer Material Development with Machine Learning and Atomic-Level Simulation 【Exhibition Information】 Exhibition Name: 14th High-Performance Plastics Exhibition within High-Functionality Materials Week Dates: November 12 (Wednesday) to 14 (Friday), 2025, 10:00 AM to 6:00 PM (ends at 5:00 PM on the last day) Venue: Makuhari Messe Halls 1-3 Booth Number: 15-10

We will showcase flexible busbars that can also be used in vehicles. Additionally, we will display various power supplies for precision welding machines, as well as automatic machines and processing electrodes.

NVIDIA, a partner company of ADLINK Japan, will hold the "Latest Technology Session by NVIDIA Partners" at the 2025 Japan IT Week [Autumn], where ADLINK Japan's Kiuchi will present on the theme "Introduction to Embedded AI Solutions for TCO Reduction." This is an open seminar that is free and does not require prior registration, so please join us.