Introduction of silicone-based release coating with electrostatic prevention performance [Otsuki Industrial Co., Ltd.]

Make the surface of the transcription matte! You can clearly see the significant difference in the gloss level of the surface.

A "release mat" is a product that has a release layer coated on a coating mat. The surface of the coating mat has unevenness. As a result, the product, which has a release layer coated on the coating mat, will also have unevenness on the release layer and on the transfer material coated on the release layer, resulting in a matte finish on the surface of the transfer material. Customers who require a matte finish on the surface after transfer should request our release mat. 【Features】 ■ Gives the surface of the transfer material a matte finish ■ Coats a release layer on the coating mat ■ The degree of gloss on the surface is significantly different *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• mat

It is possible to reduce static electricity! You can control the peeling from light to heavy.

Release coating products are associated with the issue of "release charging" that occurs when peeling off layers (such as adhesives) coated on the release coating. When release charging occurs, static electricity makes it easier for foreign substances like dust to adhere to the surface. Therefore, we have developed a silicone-based release coating product with anti-static performance to suppress release charging. If you are troubled by issues like release charging, please feel free to consult us. 【Features】 ■ Release control from light to heavy peeling ■ Excellent anti-static performance ■ Prevention of foreign substance adhesion due to static electricity *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Anti-static products

Release coating that allows control of release force from light to heavy peeling.

Otsuki Industry's "Release Coat" primarily involves coating plastic surfaces with components that have release properties (such as silicone), imparting release characteristics to the substrate surface. It allows for control of release force from light to heavy release, and additional performance enhancements such as static electricity prevention can be processed according to requirements. We can accommodate requests for materials, release force, and even small lot sizes. 【Features】 ■ Control of release force from light to heavy release is possible ■ Additional performance enhancements such as static electricity prevention can be processed according to requests ■ Available in paintable types ■ Can respond flexibly according to materials and release force ■ Capable of handling small lot sizes *For more details, please refer to the catalog or feel free to contact us.

• Special Processing Machinery
• Other processing machines
• Surface treatment contract service

An effective antistatic coating for reducing and controlling static electricity issues in plastic films!

The "antistatic coating" is a coating treatment designed to reduce and suppress static electricity issues in plastic films. Generally, plastic films are nearly perfect insulators, making them very difficult to conduct electricity and prone to static charge. As a result, static electricity issues such as friction charging, peeling charging, and coating charging can occur. To mitigate and control such static electricity issues, antistatic coatings are effective. 【Features】 ■ Reduction and suppression of static electricity issues ■ Antistatic properties ■ Can be combined with other surface treatments according to application ■ Available for small lot sizes *For more details, please refer to the catalog or feel free to contact us.

• Processing Contract
• Other surface treatment equipment
• Surface treatment contract service

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.