Thank you for visiting the 34th Plant Show INCHEM TOKYO 2021 from November 17 (Wednesday) to November 19 (Friday) 【Nihon Diavalve】.

Easy with 90-degree operation! Prevents over-tightening and damage! We solve concerns like "I'm worried if it's securely tightened..."

The "BQL400NB model" is a rapid-opening and closing type handle diaphragm valve from BioClean. While the standard handle version requires about 5 turns of operation (for DN50), the rapid-opening and closing handle allows for a very simple operation of just 【opening and closing by 90 degrees】. The position of the handle makes it clear to see the valve's open and close status even from a distance. Additionally, it has achieved a lighter and more compact design compared to conventional products. Please try the easy operation and stable sealing performance of the 90-degree rotating lever handle. 【We solve the following problems!】 ■ The opening and closing torque is excessive. → It can be reduced, greatly contributing to labor savings. ■ I want to check the open and close status from a distance. → The handle position clearly shows the valve's open and close status even from afar. ■ The valve is damaged due to over-tightening. → Only the minimum necessary operation is required. This prevents damage and extends lifespan. *For more details, please refer to the PDF materials or feel free to contact us. (The English and Chinese versions of the catalog can be downloaded from the catalog page of the special website below.)

• valve

Introduction of lining products that prevent deterioration from corrosion and chemicals!

Introducing the "Lining Type Diaphragm Valve" with excellent resistance to corrosion and chemicals. It is utilized in a wide range of fields such as chemicals, environmental and water treatment, pharmaceuticals, and semiconductors. It can be applied to countermeasure against corrosive fluids, gap corrosion, and metal ion elution. 【Product Lineup (Example)】 "Model 430": Hard natural rubber lining on a base material of FC200 or FCD-S "Model 459": PFA lining on a base material of FCD-S or SCS13 "Model 460": ETFE lining on a base material of FCD-S "Model 450": Polyethylene lining on a base material of FC200 "Model 480": Porcelain lining on a base material of FCD-S *Sanitary specification diaphragm valves are also available. *For more details, please refer to the catalog or feel free to contact us.

• others

Introducing high-quality diaphragm valves, ball valves, and butterfly valves!

This catalog is a comprehensive catalog of Daiya Valve Co., Ltd., which mainly manufactures and sells valves. It features a wide range of products that can be used in various industrial fields, including the diaphragm valve "Wear Type Diaphragm Valve," which has an arc-shaped seat (wear) in the center of the body, as well as "Bio-Clean Valves" and "Ball Valves." Please consider using our high-performance, safe, and environmentally friendly products. [Contents] ■ Wear Type Diaphragm Valve ■ Bio-Clean Valve ■ Straight Type Diaphragm Valve ■ Valves for Nuclear Power Plants ■ Rubber-Lined Check Valves, etc. *For more details, please refer to the catalog or feel free to contact us. (We also have a Chinese version available!)

• valve

Achieving high maintenance efficiency with a unit-based design! A diaphragm valve with high airtightness, zero seat leakage, and excellent corrosion and chemical resistance.

This catalog features a variety of diaphragm valves manufactured and sold by Nihon Diaphragm Valve Co., Ltd. A diaphragm valve is a type of valve that uses a flexible diaphragm made of materials such as rubber to open and close the flow path. They are broadly classified into two types: the wear-resistant type with high airtightness and the straight type with low pressure loss and minimal liquid accumulation. The catalog includes a diverse range of products, including manual operation valves, air-operated ON-OFF valves, and electric operation valves. Additionally, technical materials such as dimension and material selection tables are included at the end. [Contents] ■ Manual operation valves ■ Air-operated ON-OFF valves ■ Air-operated flow control valves ■ Electric operation valves ■ Technical materials, etc. *For more details, please refer to the PDF materials or feel free to contact us. (The English and Chinese versions of the catalog can be downloaded from the catalog page of the special website below.)

• valve

Manufacturing equipment for pharmaceuticals, food, semiconductors, etc.! A wide variety of sanitary specification valves available.

This document is a "comprehensive catalog" featuring sanitary specification valves suitable for manufacturing equipment in pharmaceuticals, food, semiconductors, and more. It includes the "Bio-Clean Diaphragm Valve Series," which maximizes the features of diaphragm valves, as well as sanitary butterfly valves for pharmaceutical containers. Customers can select valves tailored to their applications and the fluids they use. [Contents] ■ Bio-Clean Diaphragm Valves ■ Dead Space Countermeasure Products ■ Special Valves and Related Products ■ Sanitary Valves and Cleanroom Related Products ■ Technical Documentation *For more details, please refer to the PDF document or feel free to contact us. (The English and Chinese versions of the catalog can be downloaded from the catalog page of the special website below.)

• valve

A large number of ball valves, including fire-safe types and V-port valves, are featured!!

This document is a product catalog for ball valve products from Nihon Diaball Valve, a company engaged in the manufacturing and sales of valves. It includes the "Fire Safe Type Ball Valve," which can suppress fluid leakage when sealing parts such as seats and packing are burned in a fire, as well as the "High Pressure and Large Diameter Ball Valve," commonly used for general processes and high-pressure sludge, and the "Jacketed Ball Valve," which has a double structure with a jacket on the outside of the main body. You can choose from a wide range of options tailored to your application. [Contents] ■ Two-Way Ball Valve ■ Three-Way Ball Valve ■ V-Port Valve ■ Pneumatic Operated Valve ■ Electric Operated Valve ■ Special Purpose Ball Valves ■ Handling Precautions *For more details, please refer to the PDF document or feel free to contact us. (The English and Chinese versions of the catalog can be downloaded from the catalog page of the special website below.)

• valve

Featuring butterfly valves that can be selected according to applications, such as double eccentric types and PFA lining.

This document is a product catalog for butterfly valves manufactured and sold by Japan Diaball Valve. It features the "Stainless Steel High-Performance Butterfly Valve," which can be used in applications with no flow direction and reverse pressure load lines, as well as the "Cast Iron Butterfly Valve" with high sealing performance and the "PFA Lined Butterfly Valve," which excels in corrosion and chemical resistance. You can choose according to your application. [Contents] ■ Stainless Steel High-Performance Butterfly Valve ■ Cast Iron Butterfly Valve ■ PFA Lined Butterfly Valve ■ Introduction of Related Products ■ Technical Information ■ Handling Precautions *For more details, please refer to the PDF document or feel free to contact us. (The English and Chinese versions of the catalog can be downloaded from the catalog page of the special website below.)

• valve

No adhesion of tablets or powder particles, excellent cleaning properties!

We handle "valves exclusively for the discharge of tablets and powder granules." With a shape and structure that minimizes tablet residue, we offer a "damper" for safe tablet discharge, and a "butterfly valve" designed for lightweight construction, making installation and removal easy. The main components are made of stainless steel and have a buff-polished finish, ensuring no adhesion of tablets or powder granules and excellent cleanability. 【Features】 <Damper> - Structure that does not crush tablets when opening the damper - Equipped with a stopper at the opening and closing position to securely maintain the position <Butterfly Valve> - Lightweight design allows for easy installation and removal from containers and piping - Adopts a clamp method for quick assembly and disassembly, making cleaning easy *For more details, please refer to the PDF materials or feel free to contact us. (The English version of the catalog can be downloaded from the catalog page of the special website below.)

• valve

It is possible to flow a certain amount of fluid in a stepwise manner! There are many proven results in filling equipment and more!

We would like to introduce a two-stage opening and closing ball valve equipped with a two-stage rotary air-operated drive unit handled by Nippon Diaball Valve Co., Ltd. By installing a sub-cylinder in our standard rotary air-operated drive unit (90-degree rotation, Scotch yoke mechanism, W piston), the valve can mechanically perform a two-step operation during opening and closing. This allows for a controlled flow of a certain amount of fluid in a staged manner, and it has a proven track record for capacity control in quantitative shipping lines and for water hammer prevention. 【Features】 ■ Installation of a sub-cylinder in our standard rotary air-operated drive unit ■ Mechanically capable of two-step operation during valve opening and closing ■ Allows for a controlled flow of a certain amount of fluid in a staged manner ■ Proven track record for capacity control in quantitative shipping lines and water hammer prevention *For more details, please refer to the catalog or feel free to contact us. (An English version is available upon request!)

• valve

Introduction to porcelain lining products with excellent resistance to corrosion and chemicals.

The "480(04) type" is a diaphragm valve made of porcelain lining that excels in corrosion and chemical resistance. It does not experience the permeation of chemical liquids, which can be a concern under certain conditions with fluororesin lining or rubber lining. Additionally, it is suitable not only as a corrosion-resistant valve for strong acid fluids but also for highly permeable fluids such as hydrochloric acid and phosphorus trichloride. 【Features】 ■ Does not experience the permeation of chemical liquids, which can be a concern under certain conditions with fluororesin lining or rubber lining. ■ Suitable not only as a corrosion-resistant valve for strong acid fluids but also for highly permeable fluids such as hydrochloric acid and phosphorus trichloride. ■ Base material: FCD-S, Lining: Porcelain *For more details, please refer to the PDF materials or feel free to contact us. (We have English and Chinese versions of the catalog available upon request!)

• valve

Aiming to create environmentally friendly valves... "The entire company is united in promoting the continuous reduction of environmental impact!" "ISO 14001 certification obtained!"

Japan Diavalve Co., Ltd. aims to be a sustainable company that balances environmental activities and economic activities amid the worsening global environmental issues. Recognizing the commitment to environmental conservation as one of the important pillars of its business activities, the company obtained ISO 14001 certification in 2008 and is working together as a whole company on environmental activities. *For more details, please refer to the PDF materials or feel free to contact us. (The English and Chinese versions of the catalog can be downloaded from the catalog page of the special website below.)

• valve

Accurate implementation of "preventive maintenance" reduces risks and prevents troubles before they occur!

At Japan Diaball Valve, we provide reliable, safe, and high-quality after-sales service. Our employees actually visit the site to conduct inspections and repairs while observing the conditions on-site. *Please feel free to contact us, as there may be cases where on-site inspections and repairs are difficult, such as with large-diameter valves. We support our users through five sales bases across the country and partner companies. For preventive maintenance and upkeep, please consult with us. We offer free materials featuring case studies available for download in PDF format. Please take a look. 【Features】 ■ Supporting the long-term maintenance and management of user facilities ■ Providing various maintenance-related services for our products based on our unique know-how accumulated over many years and the assurance of manufacturer quality ■ Accurately executing service operations entrusted to us by users, based on over half a century of rich experience and solid technical skills.

• valve

Contributing to our customers' technological innovation! Providing reliable technology, products, and services that respond promptly to changes in the times.

Our company can select and provide valves made of suitable materials and structures for various types and conditions of fluids based on extensive experimental data and rich experience, through custom production tailored to our customers' needs. To deliver products that match societal needs in response to the rapid changes of the times, we are advancing technology development and research and development through our unique system. Additionally, we conduct strict quality control based on a quality assurance system certified by ISO 9001. 【Business Content】 ■ Manufacturing and sales of valves - Diaphragm valves - Ball valves - Butterfly valves - Other types of valves *For more details, please refer to the PDF materials or feel free to contact us.

• valve

Fukuda Co., Ltd. has been pursuing leak detection for 60 years and is committed to advancing the future of leak testing. 【 Supporting Various Leak Tests: Air Leak Test / Gas Leak Test (Hydrogen Gas, Helium Gas) 】 We develop, manufacture, and sell leak testing equipment to inspect airtightness and sealing properties. We will propose the appropriate testers and devices for each inspection target. 【 Target Industries and Examples of Inspection Targets 】 - Automotive Industry: Engines, FC components, valves and piping, various parts - Electronic Components Industry: Smartphones, keyless switches, various small sensors - Pharmaceuticals / Food / Cosmetics Industry: Bottle containers, syringes, vials, eye drop containers, pillow packaging, PTP packaging We will propose the most suitable leak testers for each industry. 【 ISO Certification 】JIS Q 9001:2015 (ISO 9001:2015)

In 2026, a memorable year for the bathing industry has begun. The year ending in "026" is a rare opportunity that occurs once every 1,000 years. With the growing health consciousness and sauna boom, baths have now evolved into a "base for well-being" that nurtures both body and mind. Amidst the diverse initiatives across the industry, one noteworthy aspect is the renovation of facilities utilizing engineering. Here, we introduce the latest case handled by Science Co., Ltd. [Shizunoyu Sagamihara: Tradition Preservation and Space-Saving Design] A renewal of a public bath that has been in operation for 57 years. The key point is the advanced equipment layout utilizing the "space of the old wood-fired boiler." Challenge: Extremely limited mechanical room space. Solution: Building a system that balances functionality and space-saving. Outcome: Maximizing the existing framework to achieve the latest water quality management and energy efficiency. Science Co., Ltd. provides optimal systems that solve on-site constraints with its expertise and solid technology as a filtration equipment manufacturer. With rational designs and proposals tailored to the site environment, we strongly support the design and construction that will enhance this special year that occurs once every 1,000 years.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

● The production time for casting prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly creating sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be created in a single molding process. This allows for the verification of multiple types in a short period.