[Shinky × Musashi Engineering Web Seminar] The Mechanism and Importance of Defoaming, Case Study: Comparison of Coating with and without Defoaming

Stirring of low to high viscosity materials and sub-micron level degassing. A rotary and orbital vacuum mixer equipped with a touch panel and communication functions.

The rotation and revolution method combined with vacuum degassing functionality allows for simultaneous mixing and defoaming/deairing, enabling the removal of bubbles down to the sub-micron level. Additionally, due to the centrifugal force generated during revolution, there is no spillage of materials during operation. The operation is as simple as setting the container and turning on the switch. 【Features】 ■ Simultaneous processing of mixing, dispersion, and removal of sub-micron level bubbles. ■ The rotation and revolution method combined with vacuum degassing functionality allows for high-precision defoaming without spillage during operation, in a short time. ■ Vacuum settings in units of 0.1 kPa, allowing for processing that takes into account the saturation vapor pressure. ■ Real-time display of progress and operating status on a touch panel. ■ Communication function (RS-232C connection) enables selection of setting conditions and starting/stopping of operation. ■ Sample source code (Python) for using the communication function is included.

• Mixer/agitator
• plastic
• Other polymer materials

Standard equipment for the rotation and revolution mixer industry suitable for small-scale material preparation in research, development, and production processes.

The self-rotation and revolution mixer "Awatori Rentaro ARE-310" is the fourth generation of a compact, versatile mixing and defoaming device that has continuously tackled various material challenges. With over 30,000 units installed worldwide since its first release a quarter of a century ago, it has become the standard in the self-rotation and revolution mixer industry. The reason it continues to receive praise around the world is its capabilities and know-how backed by originality and conviction. Check it out with a demo now! 【Features】 - High versatility, accommodating a wide range of materials from low to high viscosity. - Capable of uniform dispersion of fine particles. - Two mode settings for mixing and defoaming allow for processing high-viscosity materials in minute intervals. - A variety of containers and adapters enable processing of materials from a few milliliters to 250 milliliters. - Optional heat-resistant and cooling adapters allow for mixing and defoaming treatments tailored to the material. - The timer can be set with five memory settings, each allowing for a maximum of five continuous processes. - Pre-treatment with the self-rotation ultrasonic nano-disperser "Dispersion Nano Taro" enables nano-dispersion. - Equipped with a unique cooling mechanism. It is recommended to use it in conjunction with the optional E-heat cooler for continuous use.

• Touch Panel
• Other processing machines
• Mixer/agitator

High efficiency of material charging for small volume syringes.

The self-rotating mixer "Awatori Rentaro" and "Handa Rentaro" can easily and quickly fill syringes with materials that have been stirred, dispersed, and defoamed, without any bubbles. It can fill small capacity syringes of 3, 5, and 10 mL, allowing for the efficient handling of tasks that require small amounts. Its simple structure also makes cleaning after use easy.

• Filling and bottling machines

It is also possible to carry out the project with the materials of your choice.

At the Shinkei Application Lab, we conduct product introductions and material demonstrations online (remotely). Our technical staff and sales representatives will be present to provide suggestions for products suitable for your materials and to discuss operating conditions. Additionally, we will provide reports on the results similar to those from in-person demonstrations. As long as you have an internet connection, you can use our services from anywhere, so please take advantage of this opportunity.

• Emulsifier/Disperser
• Mixer/agitator

Our company will be exhibiting at the "12th Annual Meeting of the Japanese Society for Extracellular Vesicles" to be held at the Senri Life Science Center. We will be showcasing various products during the event. We invite all relevant parties to come and visit us. 【Suppliers】 - Partical Metrix - Dynamic Biosensors

Theme: "Bringing Japan's Fermentation Technology to the World - Exploring the Essence of Koji Mold and Solid-State Cultivation, and Considering the Future Opened by Fermentation" [Content] Afternoon (13:00–17:00): Lectures and General Discussion ◆ Keynote Lecture 1: "Expansion of Koji Fermentation Applications Overseas" Takashi Sato, President, SAN-J International, Inc. ◆ Keynote Lecture 2: "Exploring the Diverse Functions Hidden in Koji Mold from a Genomic Perspective - Towards Understanding and Utilizing Solid-State Cultivation" Junichi Maruyama, Professor, Graduate School of Agricultural and Life Sciences, The University of Tokyo ◆ Lecture 1: "Initiatives of the Microbial Industry Course at Okayama University" Takashi Hara, Specially Appointed Assistant Professor, Microbial Industry Course, Okayama University ◆ General Discussion Panelists: Takashi Sato, President, SAN-J International, Inc. Junichi Maruyama, Professor, Graduate School of Agricultural and Life Sciences, The University of Tokyo Sanzaemon Murai, President, Bioc Co., Ltd. Masahiro Kariyama, Executive Director, Fujiwara Technoart Co., Ltd. Katsuya Gomi, Specially Appointed Professor, Graduate School of Agricultural Science, Tohoku University Coordinator: Hiroshi Kanzaki, Professor, Microbial Industry Course, Okayama University

[Lecture Items] 1. Initiatives on AI Law and Policy Cabinet Office, Office for Science and Technology Innovation, Artificial Intelligence Policy Promotion Office Deputy Director, Shiho Maeda 2. Initiatives by the Ministry of Internal Affairs and Communications for the Development and Utilization of Trustworthy Domestic AI Ministry of Internal Affairs and Communications, International Strategy Bureau, Technology Policy Division, Research Promotion Office, Deputy Director, Wataru Kumahara 3. Initiatives by the Ministry of Education, Culture, Sports, Science and Technology regarding AI for Science Ministry of Education, Culture, Sports, Science and Technology, Research Promotion Bureau, Advisor (Information), Deputy Director, Seiichiro Todoroki 4. Guidelines for AI Businesses Ministry of Economy, Trade and Industry, Commerce and Information Policy Bureau, Information Economy Division, International Coordination Officer for Governance Strategy, Sho Utagawa

[Lecture Topics] 1. Strengthening Japan's Cyber Response Capabilities Shingo Umi, Deputy Director, National Cyber Coordination Office, Cabinet Secretariat 2. The Situation of Threats in Cyberspace and Police Initiatives Fumika Iwasaki, Cyber Planning Division, Cyber Police Bureau, National Police Agency 3. Enhancing Cybersecurity in the Financial Sector Mitsuhiko Komura, Deputy Director, IT Cyber and Economic Security Management Office, Risk Analysis Division, Financial Services Agency 4. Cybersecurity Policy in the Information and Communications Sector Kiyohiro Samejima, Senior Deputy Director, Cybersecurity Coordination Office, Ministry of Internal Affairs and Communications 5. Cybersecurity Policy in the Industrial Sector Tomohiro Koyama, Section Chief, Cybersecurity Division, Commerce and Information Policy Bureau, Ministry of Economy, Trade and Industry

We will be holding a seminar on the utilization of electrical design data on Friday, November 7th. In addition to presentations from users who are actively utilizing ACAD-DENKI, we will introduce customization examples and announce new solutions from Zuken Alpha Tech. We hope this will help you solve challenges related to the utilization of data in electrical control design. ▶ Event details and registration https://www.alfatech.jp/seminar/acad-denki.html ーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーー Case presentations from users who are successfully utilizing data Tips for using ACAD-DENKI and announcement of new solutions ■ Date and Time 　Friday, November 7, 2025, 13:30 - 18:30 ■ Venue 　Tokyo Conference Center Shinagawa ■ Participation Fee 　Free (Pre-registration required) *Please register individually for each participant ■ Presenting Company 　Aitec Co., Ltd. ーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーーー