Achieving non-drainage even in high temperature and humidity environments! The 'ENC-GR-LE-eco series' can be used in sites where drain water treatment is difficult!

The non-drain type control panel cooler "ENC-GR-LE-eco series" can be used in sites where drainage water treatment is difficult.

The cooler for control panels uses an internal circulation method, allowing for cooling, dust prevention, and dehumidification within the panel. It keeps the equipment in the manufacturing site in optimal condition, ensuring stable production. ■ Non-drain type with special evaporative filter! This is a non-drain type cooler for control panels that can be used in sites where draining water is difficult. It temporarily retains drain water with a special evaporative filter that excels in water absorption and air permeability, and vaporizes the drain water using the heat expelled by the cooler, eliminating the need for additional power consumption. It has achieved non-drain operation even in high-temperature and high-humidity environments of 35°C and 85% humidity. ■ No management costs for refrigerants as it uses non-fluorocarbon refrigerants! With an extremely low Global Warming Potential (GWP), it is exempt from the Fluorocarbon Emission Control Law, meaning there are no costs for recovering or destroying the refrigerants when disposing of the cooler, and there are no obligations for regular inspections during use. ■ Energy-saving operation By operating according to the load rate, it has achieved energy savings of up to 55% compared to conventional methods. It features "compressor control" through a uniquely developed inverter. *The materials can be viewed immediately via "PDF Download."

• Control Panel Cooler

Proposal for Non-Freon with Added Value: With Apiste, we contribute to reducing the burden on our customers with Non-Freon plus added value!

Products that use freon not only contribute to global warming but also impose a significant cost burden on customers. At Apiste, we are expanding our lineup with features that not only eliminate the burden of freon measures by using non-freon but also further reduce the burden on our customers. This document introduces how to choose coolers in the non-freon era. Please feel free to download and take a look. [Contents (excerpt)] ■ Are you familiar with the Freon Emission Control Law? ・What is freon in the first place? ・Freon has a negative impact on the global environment. ■ Using freon is a significant burden. ・There are costs associated with collection and destruction at disposal. ・User inspections are mandatory. *For more details, please refer to the PDF document or feel free to contact us.

• Control Panel Cooler

Eliminate maintenance for a long period! You can significantly reduce maintenance costs and man-hours!

The "GR-Pro" is a control panel cooler that not only eliminates the cost of refrigerants with its "non-Freon" design but also features new functions that further reduce the burden on customers. By adopting a finless condenser, there are no clogging points, which eliminates the need for filters and significantly reduces maintenance costs and labor. The risk of failure due to clogging is also minimized. Additionally, it can connect up to 32 units at once, allowing for temperature and error display as well as setting changes. 【Features】 ■ Low maintenance due to no clogging ■ Energy-saving (eco) and powerful cooling ■ High convenience with IoT compatibility ■ Lightweight, slim, and easy to install ■ User-friendly global specifications *For more details, please refer to the PDF materials or feel free to contact us.

• Control Panel Cooler

We exhibited a booth at the "4th Annual Meeting of the Japanese Society for Antibody Research" held at Omiya Sonic City from December 1 (Monday) to December 3 (Wednesday). Thank you very much to everyone who visited our booth during the event. Thanks to your support, we were able to successfully conclude the meeting. If you have any questions regarding the products you viewed, please feel free to reach out to us. We will respond to inquiries received during the event in due course. We appreciate your continued support of Higuchi Shokai. ▼Exhibited Products - Various assembly parts (bags, bottles, sampling, etc.) - Depth filters (post-culture filtration)

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

The "Mechanical Stitch Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

Do you have any concerns or requests regarding wired bed exit sensors? × Tangling and tripping of wired cables × Cable disconnection or damage × Worry about forgetting to turn on the switch after temporarily stopping the sensor. × Want to be notified of bed exit even from a location away from the nurse call outlet. Such concerns can be resolved simply by connecting to a wireless set linked to the nurse call system! Our nurse call linked wireless set allows you to connect bed exit sensors like "Ugo-kun," "Foldable Thin Matta-kun," "Ayumi-chan," and "Just Place Pole-kun" to transmitters and receivers, reducing wiring around the bed, alleviating concerns about tripping and falling due to cables, and contributing to a tidier work environment. Furthermore, it enables the use of bed exit sensors even from locations away from the nurse call outlet, allowing for more flexible equipment placement.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.