Notice of Participation in the Refrigeration, Air Conditioning, and Heating EXPO HVAC&R JAPAN 2022

Standard built-in electric air regulator! Testable up to full scale maximum 3.0 MPa/vacuum.

The "PROVASET T3LD" is a groundbreaking differential pressure air leak tester that uses differential pressure measurement. By measuring the differential pressure that occurs between the test work and the comparison sample, it enables a reduction in test time and high-sensitivity inspections. Real-time display of measurements and changes to set values can be performed simply and quickly on a touch panel color display. 【Features】 ■ Resolution down to 0.1 Pa (0.001 mbar) ■ 7-inch touch panel display ■ Up to 300 test programs/sequences can be set ■ Built-in pneumatic regulator as standard ■ Digital communication RS232/RS485, USB *For more details, please refer to the PDF document or feel free to contact us. *This product is available for actual machine lending and trials at our Tokyo showroom.

• Leak Testing Equipment

Equipped with a pressure circuit that can perform both flow tests and leak tests using program sequences.

The "PROVASET T3LPF" is an air flow testing device that uses an electro-pneumatic regulator to set the pressure. Real-time measurement display and setting value changes can be performed simply and quickly on a touch panel color display. It is suitable for use in test benches, production lines, and fully automated systems across all industrial sectors. 【Features】 ■ High-speed testing for filters/valves/cocks/exhaust manifolds <Flow Test> ■ Full scale testing up to a maximum of 300L/min ■ Resolution down to a minimum of 0.01cm3/min <Leak Test> ■ Full scale testing up to a maximum of 1.0MPa ■ Resolution down to a minimum of 0.01Pa (0.001mbar) * For more details, please refer to the PDF materials or feel free to contact us. * This product is available for loan or trial at our Tokyo showroom.

• Leak Testing Equipment

Regardless of machine dimensions or types of processing, by selecting suitable sensors and system configurations, we can detect minute defects in the micron range inline. Zero defective products!

The X series offers options for both press and rolling applications. The 'X3s (for press)' supports calibration of sensor waveforms with a maximum of 10 points and features an intelligent monitoring system equipped with a high-resolution 9-inch touch display. It is used for process monitoring, enabling optimization of production processes and improvement of work quality. Additionally, it has a positive impact on the entire machine. With multiple counter functions, it allows for detailed management and analysis of production. Furthermore, it can monitor process signals and display peak values, envelope curves, trends, and process quality.

• Other measurement, recording and measuring instruments

Easily manage the surface temperature of molds! Contributes to the stabilization of die-cast product quality (compatible with mega/giga casting) [*Demo available].

"TTV (Total Thermal Vision)" is an infrared vision system designed to monitor the surface temperature of molds during the die-casting process. The thermographic camera built into the machine applies infrared visual technology to monitor the thermal map of the mold surface in real-time. It visualizes the processing steps and contributes to the optimization of release spray and lubrication processes during die-casting production. Additionally, the system consists of a controller unit and a thermographic camera unit, both designed to operate in particularly harsh foundry environments. 【Features】 ■ Stabilization of quality ■ Reduction of process costs (decrease in the number of waste shots) ■ Extension of mold lifespan ■ Optimization of cycle time ■ Improvement of system efficiency (OEE enhancement) ■ Analysis of process variables and errors ■ Reduction of unexpected process stoppages *Demonstrations are available. Please feel free to inquire. For detailed specifications, please download the PDF and take a look.

• Other measurement, recording and measuring instruments

A non-contact sensor using chromatic confocal technology measures the distance and thickness of various materials that transmit white light.

By combining a diverse family of optical probes and controllers with various measurement ranges, mechanical dimensions, and measurement specifications, we can meet a wide range of application needs. We offer two models: the single-channel "CPS1" and the dual-channel "CPS2." <Features> - Capable of measuring various materials that can reflect white light (e.g., metals, glass, plastics, coatings, liquids) - Non-contact measurement possible in all cases where contact with the subject is not required - Can measure up to five layers of transparent layers simultaneously with a single optical probe - High measurement accuracy - Replaceable sensors (up to 32 maps can be saved, suitable probes can be used) - 7-inch integrated display - Passive optical probe unaffected by thermal or electrical noise - Easily integrable into any system using SDK and protocol commands - Reduction of measurement spot - Dynamic collection possible through measurements synchronized with an encoder (spatial synchronization) - Capable of measuring roughness *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Optical Measuring Instruments

We will be exhibiting at the "Food Industry Creation Exhibition '25" scheduled to be held from May 14 (Wednesday) to May 16 (Friday) at Marine Messe Fukuoka. We will showcase measuring instruments ideal for food quality and hygiene management, such as fryer oil deterioration testers and food thermometers. Our instruments can connect to the mobile app testo Smart, allowing you to save measurement values in the app and document them in PDF format, supporting the efficiency of daily fryer oil and temperature management tasks!

The Pharmaceutical and Cosmetic Manufacturing Exhibition is the largest international exhibition in Japan for the pharmaceutical and cosmetic manufacturing sector, featuring 900 companies from both domestic and international markets and attracting 34,000 attendees. A wide range of products and services supporting the pharmaceutical and cosmetic manufacturing processes will be showcased, including manufacturing and packaging, plant engineering, CMO/CDMO, measurement and inspection, sterilization and cleaning, logistics and distribution. We will be waiting for you with a wide selection of environmental monitoring systems, including testo Saveris 1 and data loggers.

[Speaker] Ryo Shu, President and CEO of Marketing Eyes Inc. [Key Lecture Content] In 2026, AI will become the "eyes" of customers, allowing them to compare and select before meeting. BtoB sales will find it increasingly difficult to achieve results through "selling." This lecture will focus on designing how to be "chosen," which influences sales, covering (1) customer understanding (surface intentions, true feelings, latent desires), (2) hypothesis development (preparing to decide the outcome before negotiations, creating materials to advance internal approvals, positioning for high added value), and (3) organizational strength (eliminating dependency on individuals to create a successful cycle), illustrated with examples of corporate successes and failures. Please apply the three takeaway sheets to your actions starting tomorrow. [Lecture Items] 1. Why will traditional "sales" no longer be effective in 2026? 2. Enhancing customer understanding - how to capture their hearts. 3. Developing strategic planning skills - how to design by working backward from goals. 4. Organizational strength (eliminating dependency on individuals and creating reproducible models). 5. Conclusion. 6. Q&A.

Today, the manufacturing site is facing a labor shortage. Therefore, it cannot function without part-time workers, temporary employees, and foreign nationals. This is not limited to the manufacturing sector. The key is how to efficiently and smoothly train these individuals in a short period to produce quality products through actual work. Simply showing a video does not count as teaching. "Watch this video." "If you don't understand, ask." New employees often feel they cannot ask questions even when they don't understand, and they may say, "It's just like the video" even if they make mistakes. If the other person does not remember, it is because you have not taught them. This seminar will help you acquire effective teaching methods and improve the skills of those who teach. As a result, workers on the shop floor will perform tasks following unified procedures, significantly enhancing quality and productivity. Even new employees or foreign workers can become immediate assets in a short period. By honing the "ability to teach," we will create a system that ensures workers adhere to the established procedures and do not revert to old habits. *For more details, please download the PDF or contact us.

【Utilization of Flow Data for Beginners】 "What can be done? What are the costs?" Understand the overall picture, examples, demos, and pricing in just 30 minutes! Are you interested in utilizing flow data but have questions like, "Where should I start?" or "I can't envision the implementation effects and costs"? Flow data is gaining attention in various fields such as store planning, area marketing, and promotional measures. This seminar is a "mini introductory seminar" designed to resolve the questions of busy individuals who feel they can't take the first step due to a lack of specific information in just 30 minutes. We will explain the "overall picture" of flow analysis services, "specific utilization scenarios," and "cost concerns" in easy-to-understand terms. Additionally, we will include a demonstration using actual service screens to concretely introduce the image of utilization after implementation and the process leading up to it.