Cobra Nitrogen Gas Type Spray Low Temperature Device (Cooling up to 80K) [No Liquid Nitrogen Required, Capable of Continuous Operation for Extended Periods]

Non-liquid nitrogen, nitrogen gas type X-ray diffraction spray low-temperature device!

Cobra is a spray cooling device that uses nitrogen gas instead of liquid nitrogen. It frees you from issues related to the storage, transportation, and safety of liquid nitrogen, as well as concerns about forgetting to refill the Dewar. Cobra can operate continuously for weeks or months without user intervention. Like the liquid nitrogen type Cryostream, it can cool down to 80K with a stability of 0.1K. *For more details, please download the PDF or feel free to contact us.*

• Other physicochemical equipment

A spray low-temperature device for X-ray diffraction that can cool down to 170K using dry air! Ideal for cooling small molecules!

The Smartstream from Oxford Cryosystems is a spray cooling device that can cool down to 170K (-103°C) using dry air instead of liquid nitrogen or nitrogen gas. It requires very little maintenance and is the ideal solution for cooling small molecule crystals. *For more details, please download the PDF or feel free to contact us.*

• Other physicochemical equipment

A spray-type low-temperature device for X-ray diffraction that can cool down to 80K with liquid nitrogen! Low liquid nitrogen consumption and high maintainability!

The Cryostream 800 series from Oxford Cryosystems is a liquid nitrogen type spray cooling device capable of cooling down to 80K. It is the fourth generation of the Cryostream series from Oxford Cryosystems, following the 500, 600, and 700 models. *For more details, please download the PDF or feel free to contact us.*

• Other physicochemical equipment

Dual-type X-ray diffraction spray cryostat for helium gas and nitrogen gas!

The N-Helix from Oxford Cryosystems is a spray cryogenic device that can cool down to 28K using helium gas without the need for liquid helium. It is designed to operate economically with minimal gas consumption, allowing for approximately 16 to 20 hours of operation with a standard helium gas cylinder. By connecting multiple cylinders using a manifold, long-duration experiments are possible. *For more details, please download the PDF or feel free to contact us.*

• Other physicochemical equipment

Cooling and heating chamber for X-ray diffraction of powder samples.

The Chimera from Oxford Cryosystems is a high-performance temperature-variable chamber for powder X-ray diffraction, with a temperature range of 70K to 525K and a temperature stability of 0.1K. Unlike conventional cooling and heating chambers, the Chimera uses a single-stage GM cryocooler from Oxford Cryosystems, eliminating the need for liquid nitrogen. *For more details, please download the PDF or feel free to contact us.*

• Other physicochemical equipment

Flat plate for powder X-ray diffraction that can be cooled down to 12K!

The PheniX from Oxford Cryosystems is a unique closed-cycle helium cryostat specially designed for powder diffraction at very low temperatures. PheniX is designed to be mounted on a vertical goniometer and comes with mounting plates for various powder systems. 【Key Features】 ■ Minimum cooling temperature of 12K without liquid refrigerants ■ Excellent temperature stability of 0.1K ■ Fast cooling times: 20K in 45 minutes, 12K in 60 minutes ■ Quick sample exchange with only 40 minutes of warm-up time *For more details, please download the PDF or feel free to contact us.

• Other physicochemical equipment

Spray low-temperature device optimized for capillary samples!

The Cryostream Compact from Oxford Cryosystems is a compact version of the Cryostream 800 series spray cooling device, optimized for cooling powder samples in capillaries. The use of a short nozzle allows for coaxial alignment of the nozzle and capillary, reducing the risk of ice formation. It cools down to 80K using liquid nitrogen. The consumption of liquid nitrogen is low, and it requires very little maintenance. *For more details, please download the PDF or feel free to contact us.*

• Other physicochemical equipment

[To the owners of parking lots and parking lot construction companies] "I'm worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those facing sidewalks or roadways are particularly prone to dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surroundings with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Vehicle Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

Automate pressure control and use it as a pressure/back pressure regulator! The Auto Pressure Controller "SLA/SLAMf Series" is equipped with a wealth of options and features. By combining the SLA/SLAMf Series with mass flow controllers and meters, you can achieve consistency in control (process) with the advantages of a single platform. The SLA/SLAMf Series uses a primary flow calibration system that is traceable to international standards, characterized by high precision, long-term stability of the zero point, and excellent reproducibility based on our superior measurement systems and methods. Applications: ■ Thin film processes ■ Catalyst research and pilot processes in chemical and petrochemical industries ■ Laboratory and analytical systems ■ Fuel cell technology ■ Life sciences bioreactors

In recent times, there has been a growing interest in infection control measures and facility hygiene management. Our company offers non-contact sensor products that are recommended for commercial facilities, food factories, and nursing and caregiving facilities. 【Sensors for Automatic Doors】 ● Light Touch Sensor HA-T401 … When you wave your hand in front of the automatic door, the sensor detects the movement and opens or closes the door. It is recommended for making doors that use touch switches non-contact. ● Hand Wave Sensor PF-R5, PF-U2, DHS-1 … Opens and closes the automatic door by waving your hand in front of the sensor. ● Foot Switch PF-01S/01D/03S/05 … Opens and closes the automatic door by placing your foot in the opening. 【Access Control System】 ● Face Recognition + Unmanned Temperature Measurement DS Series … Capable of detecting mask-wearing and measuring body temperature simultaneously with face recognition. ● Automatic Disinfectant Spray Dispenser PHW-03B … Automatically sprays disinfectant when you wave your hand in front of the sensor. 【Nursing and Care Sensors】 ● Infrared Bed Exit Sensor "Just Place It Pole-kun" … This bed exit sensor is installed next to the bed and alerts via nurse call when the subject enters the detection range. ◎ For more details, please download the catalog or contact us.

A world where miniaturization and high performance are advancing daily. Mobile phones now have features that were unimaginable just a few years ago. The realization of such high performance is thanks to thin film technology, which is utilized in a wide range of applications as follows: 【Applications of Thin Film Technology】 - Microelectronics - Anti-reflective coatings for glass - Antibacterial metal coatings for medical devices - Flexible solar cells Thin film technology is defined as "the process of creating, coating, and processing thin film materials on a substrate surface." We are currently publishing basic knowledge materials on glass coatings for the glass industry! ⚫ Glass Coatings ⚫ What is Low-E Glass? ⚫ Laminating and Materials of Low-E Coatings ⚫ Application Requirements ⚫ What is Low-E Coating Technology? ⚫ Glass Coating Market Please take a moment to read it. https://mono.ipros.com/news/detail/129167/

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!