Visualize ultraviolet light from 250 to 500 nm! UV Sensor Card / Ultraviolet Sensor Card

Visualizing ultraviolet light from 250nm to 500nm!!!

The UV sensor card (ultraviolet sensor card) is laminated and is the most common product in the UV sensor series. It emits visible light from the areas exposed to ultraviolet radiation. The letter R (reflective) at the end of the model number indicates that the UV beam image is displayed only on the front side of the card (the irradiated side). The letter T (transmissive or translucent) at the end of the model number indicates that the UV beam image is displayed on both sides of the card. At the same ultraviolet intensity, the R-type card provides a clearer image due to the backing of reflected light. The surface is not laminated to prevent the blocking of ultraviolet rays.

• Other inspection equipment and devices

Visualizing ultraviolet light from 250nm to 500nm!!!

The UV sensor seal (ultraviolet sensor seal) is a thin, flexible sheet-type sensor. It emits visible light from the area exposed to ultraviolet radiation. It can be cut into any shape and used by peeling off the backing to stick it in various locations. The phosphor is coated with adhesive on a transparent Mylar. This sensor seal is not laminated. By adhering the sensor seal to reflective materials, it becomes a reflective-type sensor, allowing you to confirm the emission from the irradiated surface. When attached to transparent materials, it acts as a transmissive-type sensor, enabling confirmation of emission from both sides.

• Other inspection equipment and devices

Visualization of infrared light from 700 to 1700 nm through electronic trapping!!!

The IR sensor card (infrared sensor card) is laminated and is the most common product in the IR sensor series. It emits visible light from the area where infrared is irradiated. The letter R (reflective) at the end of the model number indicates that the IR beam image is displayed only on the front side of the card (the irradiated side). The letter T (transmissive or translucent) at the end of the model number indicates that the IR beam image is displayed on both sides of the card. At the same infrared intensity, the R type card provides a clearer image due to the backing of reflected light. The phosphor layer is laminated between transparent plastics suitable for various near-infrared detection and imaging applications.

• Other inspection equipment and devices

Visualizing infrared light from 700 to 1700 nm through "electronic trapping"!!!

The IR sensor seal (infrared sensor seal) is a thin, flexible sheet-type sensor. It emits visible light from the area where infrared light is irradiated. It can be cut into any shape and used by peeling off the backing to stick it in various locations. The phosphor is coated with adhesive on transparent Mylar. This sensor seal is not laminated. By attaching the sensor seal to reflective materials, it becomes a reflective sensor, allowing confirmation of light emission from the irradiated surface. When attached to transparent materials, it acts as a transmissive sensor, enabling light emission to be confirmed from both sides.

• Other inspection equipment and devices

Visualizing infrared light from 700 to 1700 nm using "electronic trapping"!!!

The infrared position detection board is a sensor printed with crosshairs and circular sighting lines on a 3mm thick polycarbonate substrate. It emits visible light from the areas where infrared is irradiated, making it ideal for adjusting the optical axis of infrared. There are versions available in reflective (R) and transmissive (T). They can be secured to various fixtures using clamps, drilling, bolting, or other methods for installation on different equipment. Both versions have measurement lines marked in 2mm increments.

• Other inspection equipment and devices

Are you making progress on measures for the "2024 Problem"? With stricter management of drivers' working hours, reducing "waiting time" has become an urgent issue in the logistics field. To address this challenge, our company, Hotron, proposes the "Vehicle Detection Ultrasonic Sensor 'HM-UX2'," which instantly grasps the availability of loading bays. The 'HM-UX2' contributes to the resolution of waiting times by accurately understanding the availability situation, reducing unnecessary waiting and queueing, and shortening waiting times to alleviate the burden on drivers! By replacing the "eyes" of your loading bay management with this high-precision sensor, why not start addressing the "2024 Problem"? Take a look at the product features: "Can it accurately detect availability?" "Can we really use it in our company?" "I just want to know the cost, even if it's an estimate." If you have any questions or requests, please feel free to consult with us.

Tokyo, August 7, 2025 - (JCN Newswire) - Anthropic, an AI research and development company that develops the cutting-edge AI model Claude, announced today the appointment of Hidetoshi Tojo as the Representative Executive Officer and President of its Japanese subsidiary. Tojo has extensive experience driving growth for technology companies in Japan, most recently serving as the President and Executive Officer of Snowflake's Japanese subsidiary, where he was involved from the launch of the business and achieved significant growth. He has also contributed to the advancement of data utilization in major Japanese companies by closely collaborating with various system integrators. Additionally, he has experience leading teams at Google Cloud Japan and Microsoft, both at their U.S. headquarters and Japanese subsidiaries. For more details, please refer to: https://acnnewswire.com/press-release/japanese/101731/

We sincerely apologize for the inconvenience, but Asano Co., Ltd. will be closed for summer vacation during the following period. We appreciate your understanding. Closure Period: August 13, 2025 (Wednesday) to August 17, 2025 (Sunday) Reopening: August 18, 2025 (Monday) <Inquiries> We will respond sequentially starting from August 18, 2025 (Monday). Asano Co., Ltd. is a manufacturer that supports the development of mobility parts, including automobiles, motorcycles, bicycles, aircraft, and space rockets. We conduct in-house integrated production of sheet metal, plastic, and composite products. We offer proposals for hybrid molding and multi-material bonding, among others. ■ Inquiries ■ Asano Co., Ltd. Headquarters and Gunma Factory 2718-1 Sanwa-cho, Isesaki City, Gunma Prefecture, 372-0011 TEL: 0270-75-1700 FAX: 0270-75-1600 MAIL: salesg@asano-japan.com Official YouTube Channel: https://www.youtube.com/@asano-japan

Newly released: Contact Angle Meter Entry Mini Kit Model, Amazon Exclusive Model JISR3257 compliant, includes θ/2 method and contact angle analysis software. Windows PC sold separately. Complete product priced at ¥399,300 (tax included). At the same time, we have started selling individual components for the contact angle meter kit as an Amazon exclusive model: "θ/2 Method Contact Angle Analysis Software" Kit 1, "Stage + Backlight + Housing" Kit 2, and "Dedicated USB Camera" Kit 3. The contact angle meter can be integrated into the device, allowing for the combination of "θ/2 Method Contact Angle Analysis Software" Kit 1 and "Dedicated USB Camera" Kit 3 for applications. Only the necessary elements such as software and camera can be combined. These models are exclusive to Amazon and will be sold and shipped by Amazon.co.jp.

Our company, NICS Corporation (Headquarters: 1-11-1 Uno, Tamano City, Okayama Prefecture, President: Shinichiro Yamane), had an employee featured in the special article "New Star ★ Running" in the local economy section of the Sanyo Shimbun dated August 7.