Wireless Power Supply Demo Device <Power Supply and Communication to Sensors on Rotating Body Achieved>

Sensors can be replaced with various types! They can be applied to equipment condition monitoring devices and more.

We would like to introduce our "Wireless Power Transfer Demo Unit." A brightness sensor, temperature sensor, and receiving circuit are installed on a rotating table, allowing for wireless power transfer from the transmission circuit to the receiving circuit. The transmission circuit collects sensor information simultaneously with wireless power transfer. The sensors can be replaced with various types, making it possible to install them in locations that were previously not feasible. 【Features】 ■ Brightness sensor, temperature sensor, and receiving circuit installed on a rotating table ■ Wireless power transfer from the transmission circuit to the receiving circuit ■ Activation of each sensor connected to the receiving circuit ■ The transmission circuit collects sensor information simultaneously with wireless power transfer ■ Monitor sensor information on a PC *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services

Wireless power supply is possible in enclosed spaces! The receiving circuit can be individually recognized by ID.

We would like to introduce our "Wireless Power Transfer Demonstration Device." The receiving circuit is installed underwater, and wireless power is transmitted through glass from the power transmission circuit to the receiving circuit. The power transmission circuit collects sensor information simultaneously with wireless power transfer. This can be applied to monitor the vacuum level of a vacuum chamber, as well as the temperature inside a constant temperature bath. 【Features】 ■ Receiving circuit installed underwater ■ Wireless power transfer through glass from the power transmission circuit to the receiving circuit ■ Water temperature measured with a temperature sensor mounted on the receiving circuit ■ Power transmission circuit collects sensor information simultaneously with wireless power transfer ■ Monitored temperature displayed on a PC ■ Receiving circuit can be individually recognized by ID *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services

Up to 50W output is possible! It can be used for practical evaluations incorporated into your products.

We would like to introduce our "High-Frequency Power Board." By using our wireless power evaluation high-frequency power board and reference antenna, you can confirm the operation of wireless power transmission. The high-frequency power board can output up to 50W, and with the reference antenna, it can operate with a load of up to 35W at a power transmission distance of 40mm. We also accommodate custom antenna designs according to your requests, so please feel free to contact us when needed. 【Features】 ■ Uses our wireless power evaluation high-frequency power board and reference antenna ■ High-frequency power board can output up to 50W ■ Reference antenna can operate with a load of up to 35W at a power transmission distance of 40mm ■ Operates LED tape (12V) and fan (5V) as loads ■ The output start switch allows you to toggle the LED and fan On/Off by waving your hand *For more details, please refer to the PDF document or feel free to contact us.

• Printed Circuit Board
• Circuit board design and manufacturing
• Embedded system design service

We can accommodate specification changes according to your requests! Since there are no special controls or circuits, it is suitable for initial consideration of antennas.

We would like to introduce our "High-Frequency Power Supply Board for Wireless Power Transfer Evaluation." You can change the output frequency using setting pins and a variable resistor, and we also support the design, prototyping, and evaluation of antennas and peripheral circuits. This can be used as a high-frequency power supply circuit to operate wireless power transfer devices at various operating frequencies. 【Features】 ■ Output frequency can be changed using setting pins and a variable resistor ■ Custom specifications can be accommodated based on your requirements ■ Support for the design, prototyping, and evaluation of antennas and peripheral circuits ■ Can be used as a high-frequency power supply circuit ■ Suitable for initial consideration of antennas due to the absence of special controls or circuits *For more details, please refer to the PDF materials or feel free to contact us.

• Printed Circuit Board
• Circuit board design and manufacturing
• Embedded system design service

Wireless power transfer technology selected for the "Kansai Manufacturing Selection 2018" by the Kinki Bureau of Economy, Trade and Industry.

"Wireless power transfer," also known as wireless power transmission, non-contact power transmission, or Wireless Power Transfer (WPT), is a technology that has recently gained attention as a method for supplying power to wireless terminals of IoT devices using advanced technology. Our wireless power transfer utilizes a magnetic resonance method, which features long transmission distances and high efficiency. To actually perform power transmission, it is necessary to combine various technologies in addition to antenna design, so we will propose solutions tailored to our customers' needs, starting with contract design. 【Features】 ■ Design of suitable coils tailored to application devices ■ Maximization of transmission efficiency at the desired transmission distance ■ Evaluation of transmission efficiency and output power of the wireless power transfer section ■ Adjustment of magnetic resonance to enhance transmission efficiency *For more details, please refer to the PDF materials or feel free to contact us.

• power supply
• Power Supplies
• Other contract services

For wireless power transfer design outsourcing, go to WTI!

This technology enables wireless power supply for electronic devices, allowing for high-efficiency power transmission even over long distances. The electromagnetic induction method commonly used for wireless power transmission typically has a transmission distance of about 1 cm. However, our magnetic resonance method allows for power transmission over distances of several tens of centimeters. Additionally, our unique coil design based on our patented technology enables more efficient power transmission and provides a wide range of compatibility for highly customizable wireless power devices. 【Service Overview】 ■ Contract design service for wireless power supply coils ■ Contract evaluation service for magnetic resonance wireless power transmission *For more details, please download the PDF or feel free to contact us.

• Other contract services

The glass pot lid has a hydrophilic heat-resistant coating, allowing you to check the cooking state without any fogging.

SPACECOOL Co., Ltd. is pleased to announce its support for the purpose of the newly established memorial day "Day to End the Too Hot Summer" by the Japan Climate Leaders Partnership (JCLP). In order to address the increasingly severe heat waves, we will continue to promote the expansion of our zero-energy cooling radiative cooling material "SPACECOOL." JCLP has registered August 8, 2025, and every August 8 thereafter, as "Day to End the Too Hot Summer" with the Japan Anniversary Association. — What is the new memorial day "Day to End the Too Hot Summer"? In recent times, many regions in Japan have been experiencing consecutive days of extreme heat, and the impacts of climate change are manifesting in serious ways in our lives. Nevertheless, reports and discussions linking this to "climate change" are limited, and there is currently a lack of momentum for climate change measures. In response to this issue, JCLP has decided to establish the "Day to End the Too Hot Summer" during this hottest time of the year, creating a social impetus to reframe "heat" as a climate change issue. This memorial day aims to share the commitment to halt the climate crisis for future generations and serve as a starting point for advancing the systemic transformation of society as a whole.

Are you making progress on measures for the "2024 Problem"? With stricter management of drivers' working hours, reducing "waiting time" has become an urgent issue in the logistics field. To address this challenge, our company, Hotron, proposes the "Vehicle Detection Ultrasonic Sensor 'HM-UX2'," which instantly grasps the availability of loading bays. The 'HM-UX2' contributes to the resolution of waiting times by accurately understanding the availability situation, reducing unnecessary waiting and queueing, and shortening waiting times to alleviate the burden on drivers! By replacing the "eyes" of your loading bay management with this high-precision sensor, why not start addressing the "2024 Problem"? Take a look at the product features: "Can it accurately detect availability?" "Can we really use it in our company?" "I just want to know the cost, even if it's an estimate." If you have any questions or requests, please feel free to consult with us.

The following cameras are supported in the Elua 7.6 series. Product introduction: https://aileunsys.co.jp/b01_aileun.html Compatible camera list: https://aileunsys.co.jp/aileun/compatible_camera.html Newly added: - Manufacturer: DAHUA Model number (1 model): DH-IPC-HFW2449TLN-S-PRO

Dear Valued Customers, Thank you very much for your continued support. We would like to inform you that our company will be closed for summer vacation from Wednesday, August 13, 2025, to Friday, August 15, 2025. We will resume normal operations on Monday, August 18. We appreciate your understanding and cooperation.