A feature article has been published in "NEXCOM Express Japan Edition."

Dedicated fast charger for lithium-ion batteries combined with a worldwide input AC adapter.

The "MQLi" series supports rapid charging of lithium-ion secondary batteries with 1 to 10 cells. Custom options beyond standard specifications are also available. Please feel free to contact us with your requests. 【Features】 ■ Charges at 4.1V per cell, considering battery lifespan. ■ The charger status is displayed via LED during charging, when charging is complete, and in case of errors. ■ To ensure optimal charging, there is a charging standby function that stops charging at low and high temperatures. *1 ■ Detects when the battery is not connected. *1 ■ Protection timer settings can be customized in four stages. ■ Four stages (180, 240, 300, 360 minutes) ■ To reduce stress on lithium-ion batteries, constant current charging is performed at low voltage. ■ Detects voltage abnormalities in the battery and terminates with an error. ■ If voltage drop due to natural discharge is detected, charging will restart. This product complies with the RoHS directive. *1: When a thermistor is built into the battery pack. *For more details, please download the PDF from our website or contact us.

• Charger

High efficiency, low noise, and high output condensed into a compact size!

The "RC60M" is a compact and low-noise AC adapter. It features a circuit design that excels in standby power and operational average efficiency. The output capacity is up to approximately 60W, with output voltages available in three types: 12V, 16V, and 24V. 【Features】 ■ Made in Japan ■ Compliant with DoE (LEVEL VI) standards (U.S. Department of Energy) ■ Compliant with the European new energy regulation CoC-Tier2 ■ Ultra-compact size ■ Compliant with RoHS2 (10 substances) directive *For more details, please download the PDF or contact us.

• AC adapter

Resonant type, ultra-compact, low-noise adapter

The "RC120M" is a compact, high-efficiency current resonance type adapter with low noise characteristics. It complies with the European new energy regulation CoC-Tier2. The output capacity is up to approximately 120W, with standard output voltages of 12V, 16V, and 24V. Please feel free to contact us if you have any requests. 【Features】 ■ Input: AC90–264V ■ High reliability/low noise with large capacity and compact size (120W output in 364cc, 330W/liter) ■ Complies with harmonic current regulations ■ Ultra-compact size: Width 68mm × Depth 153mm × Height 35mm ■ Complies with the European new energy regulation CoC-Tier2 *For more details, please download the PDF or contact us.

• AC adapter

We are committed to domestic integrated production and provide high-quality power supplies tailored to our customers' specifications.

Futaba Electric is a domestic switching power supply manufacturer established in 1962. Since its founding, the company has been committed to domestic integrated production, practicing the design and development of high-performance power supplies that can be used safely and securely, as well as manufacturing and quality assurance. Our custom power supplies are tailored to meet the needs of our customers' business equipment and are produced and used for 5 to 10 years. Unlike standard power supplies, we do not suddenly discontinue production, and we continue to supply high-quality power supplies for as long as possible. Futaba Electric's high-quality power supplies, which can be supported for long periods, are widely adopted in medical, communication, infrastructure, and industrial applications. For long-term, safe, and secure power supply development, trust Futaba Electric. *For more details, please refer to the related links page or feel free to contact us.*

• Switching Power Supply

To customers considering the introduction of vehicle detection sensors for parking lot construction, design, and management: Are you facing any issues with the challenges you currently have or selecting the right sensors for parking lot management? Hotron offers free materials that explain how to utilize vehicle detection sensors and the benefits of their introduction! ▽ Here is the lineup of materials ◉ Basic Guide to Vehicle Detection Sensors This guide focuses on the challenges and solutions in parking lot operations, introducing the overview of vehicle detection sensors. ◉ Key Points for Introducing Vehicle Detection Sensors This material discusses the benefits of introduction based on installation locations and specific challenges. ◉ Case Studies of Vehicle Detection Sensor Implementation This document introduces the challenges before implementation and the results after introduction. For more details, please download from our website and check it out. https://www.hotron.co.jp/download/

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

[To the owners of parking lots and parking lot construction companies] "I'm worried about the possibility of colliding with pedestrians when exiting the parking lot..." Among vehicle entrances to parking lots, stores, residences, and factories, those facing sidewalks or roadways are particularly prone to dangerous incidents such as collisions with pedestrians or between vehicles. To alleviate such concerns, Hotron proposes a [Vehicle Exit Warning Sensor] that detects vehicle departures at various sites and alerts the surroundings with LED lights and buzzers. The system consists of a simple configuration of "Sensor" + "Controller" + "Switching Power Supply (24V)" + "LED Rotating Light." *When using the exit warning system, we kindly ask customers to arrange for the switching power supply (24V), LED rotating light, control panel, circuit breaker, etc. Since it can be retrofitted, it can also be used for existing parking lot entrances. [Contents Included] ○ Vehicle Exit Warning System Configuration ○ Comparison Table of Exit Warning Sensors ○ Four Modes ○ Wide Range of Applications ○ Customer Feedback ○ Appearance Diagram / Specifications ◎ For more details, please contact us or download the catalog.

In facilities operating nurse call systems, we have made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.