Heganes Japan will exhibit at the "Automotive Technology Exhibition 2022 YOKOHAMA."

High-quality materials made from scrap of luxury automobiles, featuring excellent environmental performance.

Heganes Atomized Iron Powder is an extremely high-quality material made from high-grade automotive scrap, known for its excellent environmental performance. It is also used as the base iron powder for our high-strength low-alloy steel powder, Distalloy.

• Steel
• Other metal materials

Received outstanding trust as the global industry standard and widely adopted beyond powder metallurgy applications.

Heganes reduced iron powder is the root of Heganes iron powder and is produced using the original technology known as the "Heganes reduced iron powder method." It has a history of over a hundred years and boasts the largest production capacity in the world. It has gained exceptional trust as the global industry standard and is widely adopted beyond powder metallurgy applications.

• Steel
• Other metal materials

A very stable and easy-to-use material that flexibly responds to engineering conditions.

Heganes partial diffusion low alloy steel powder Distalloy has been a pioneer in partial diffusion low alloy steel powder and has received much support as a world standard since its development. It is an extremely stable and easy-to-use material that flexibly adapts to process conditions.

• Steel
• Other metal materials
• others

Heganes low-alloy steel pre-alloy powder Astaloy offers a rich variety including Fe-Mo, Fe-Cu, Fe-Ni-Mo, and Fe-Cr-Mo systems.

Heganes low alloy steel pre-alloy powders, such as Fe-Mo, Fe-Cu, Fe-Ni-Mo, and Fe-Cr-Mo systems, are available in a wide variety. They are characterized by achieving a homogeneous structure, excellent hardenability, and a high sinter hardening effect.

• Steel
• Other metal materials
• others

We provide the optimal varieties to match the characteristics of individual filters and diverse requirements.

This is an introduction to the applications of sintered stainless steel filters made from iron powder, handled by Heganes Japan Co., Ltd.

• Steel
• Other metal materials

Introducing an example of electromagnetic design and design methods for pancake-type ultra-flat high-torque (axial gap type) motors utilizing powder magnetic cores with magnetic isotropy!

A design report for an axial gap motor that effectively utilizes the three-dimensional magnetic properties of the soft magnetic composite "Somaloy(R)" has been made publicly available on the website of JMAG, an electromagnetic field analysis software provided by JSOL Corporation. 【Items included in the design report】 - Description of "Somaloy(R)" material and overview of core manufacturing process - Concept of axial gap motor - Motor specifications, shape, and list of components - Model set including coil arrangement and motor simulation results 【Specifications Overview 12 slots / 10 poles open slot】 SSAFM DSAFM Maximum output 4.9kW 7.7kW Rated torque 3.1Nm 5.1Nm Speed 6000rpm 6000rpm Dimensions 110mm 110mm Shaft length 41mm 66.2mm ★ The design report can be downloaded for free with a free registration on the JMAG site ★ Even those who are not JMAG users can download it by registering for free, so please access the hyperlink to the official JMAG website below. *If you would like to try designing with the JMAG model, please contact us separately. ↓ JMAG Official Website ↓

• electromagnet

Soft magnetic material with an insulating coating applied to pure iron powder! Achieving high frequency (miniaturization) by reducing eddy current losses! ☆ Easy molding of complex shapes ☆

"Somaloy(R)" is a soft magnetic material made of pure iron powder with an insulating coating, developed by our company as a world first. It enables the manufacturing of cores with three-dimensional shapes and three-dimensional magnetic properties through mold forming. It is particularly useful for the development and manufacturing of high-spec soft magnetic cores required for miniaturization and high output in applications such as electric vehicles. 【Features】 - High compressibility allows for high permeability. - Enables three-dimensional magnetic circuit design, achieving miniaturization, lightweight, and cost reduction of products. - An insulating coating on pure iron powder results in low eddy current loss characteristics, achieving high efficiency in high-frequency ranges! - Complex shapes can be formed without secondary processing through net shaping (three-dimensional mechanical shapes that can be formed with uniaxial pressure). 【Grades】 - We offer a range of products covering frequencies from 100Hz for motor applications to up to 100kHz for reactor applications. ★ A catalog of "Somaloy(R)" is available for download via the button below.

• electromagnet
• Other metal materials

A must-see for those struggling with miniaturizing motors! Ideal for pancake structure high-torque ultra-flat axial gap motors, etc.!

"Somaloy(R)" is a soft magnetic material made from pure iron powder that has been developed and insulated by our company. We enable innovative motor designs that are not constrained by the limitations of electromagnetic steel sheets, providing solutions to many challenges faced by our customers. 【Matching of Axial Gap Motors (Axial Flux Motors) Topology with "Somaloy(R)"】 　　■ Net shaping (3D mechanical shapes that can be "unidirectionally pressed") 　　■ Realization of freedom in 3D magnetic circuit design 　　　☆ Achieving compact, lightweight, and low-cost designs that were difficult with conventional electromagnetic steel sheets☆ 【Grades】 　Covers from below 100Hz to 100kHz 【Examples of Advantages for Electric Motors】 　 Reduces dimensions and weight by up to 60% ☆ Technical design support for axial gap motors is also underway☆ 　・ 3D magnetic circuit analysis using JMAG 　・ 3D CAD modeling 　・ Optimization using Mode Frontier 　・ Winding design 　・ Strength analysis 　　 We will design according to your requirements. Please feel free to contact us. 　★ Catalogs for axial gap motors using "Somaloy(R)" are currently being distributed ★

• Steel

Achieving alloy-level low loss with pure iron-based powder!

"Somaloy(R)" is a soft magnetic material made of pure iron powder with an insulating coating, developed by our company ahead of the world. [Main Needs for Automotive Reactors] - Low cost - Low loss - Miniaturization [Features and Benefits of Somaloy] - Each particle of pure iron base powder is coated with an insulating layer, significantly reducing eddy current loss in the high-frequency range. - Being based on pure iron, it achieves high compressibility and easy handling, resulting in improved manufacturing efficiency. [Suitable Application Examples] - Boost reactors for DC/DC converters There is a proven track record of mass production of automotive boost reactors using "Somaloy(R)"! ★ We are currently offering the "Somaloy(R)" catalog without exception! ★ If you have any questions, please feel free to contact us♪

• Steel

We will be exhibiting at the "Kyushu Printing Information Industry Exhibition 2026" held at the Fukuoka International Center. During the event, we will showcase various products. We invite all related parties to come together and visit us. 【Suppliers】 ・Laser-X

This year, Toyota Kikan will exhibit at the Toyota Business Fair. We will introduce products that are useful for heatstroke prevention and more. Our top recommendation is SPACECOOL. Please feel free to visit our booth! SPACECOOL is an "eco-friendly cooling solution" essential for the future of our planet's environment! Be sure to check it out. Also, take a look at the basic knowledge for heat prevention in factories moving forward.

In the operation of drawings, do you face challenges such as "taking too long to find," "uncertainty about whether it's the latest version," or "high likelihood of confirmation errors"? By utilizing CADSUPER's barcode function (optional), you can reliably connect drawings and information, allowing for a smooth advancement of DX in drawing utilization. In this seminar, we will introduce how using barcodes can change: - Drawing management and search - Confirmation and cross-checking tasks - Information collaboration with the field This content is recommended not only for existing users but also for those considering improving the efficiency of drawing operations and reducing errors.

Daitō Shikō Co., Ltd. will be exhibiting at the "International Fire and Disaster Prevention Exhibition" held at Shirakawa Park in Nagoya City, Aichi Prefecture, from Thursday, May 28, 2026. At the exhibition venue, we plan to showcase goods that are perfect for fire prevention events and recruitment activities for members. If you are looking for SP tools, promotional items, or novelties, please be sure to visit our booth.

[Speaker] Miho Ko Shimada, Partner Attorney, Mori Hamada & Matsumoto Law Firm, Foreign Law Joint Enterprise [Key Lecture Content] The movement towards the implementation of CCS, which is positioned as an essential technology for decarbonizing hard-to-abate industries, is gaining momentum in Japan. Among the "advanced CCS projects" selected for business commencement in the early 2030s, some pipeline projects have progressed to the exploratory drilling stage. For shipping transport projects, discussions are underway to create mechanisms for clustering CO2 sources and improving shipping transport efficiency. In this seminar, following the full enforcement of the CCS Business Act on May 22, we will organize the current state of the business environment related to CCS and examine the latest discussions at the Agency for Natural Resources and Energy and the Ministry of the Environment (based on information available at the time of the event) from a legal perspective as we consider the shape of CCS projects leading to Final Investment Decision (FID). [Lecture Items] 1. Current state of the business environment related to CCS 2. Overview of the CCS Business Act 3. Overview of the cost difference support system for CCS projects (pipelines) 4. Structural considerations through the CCS value chain 5. Q&A / Business card exchange