Thank you for visiting "ThermoTech 2022" and the ranking of featured products.

★Demo unit available for loan★ - Domestic dew point meter capable of measuring dew points from -100 to +20 ℃dp.

● Domestic development and manufacturing ● Dew point measurement from -100 to +20 ℃dp ● Accuracy ±2 ℃dp ● Usually in stock ● Comprehensive support system ● Traceability available ■ Techne Measurement Co., Ltd. has been handling moisture management and measurement instruments centered around dew point meters for the past 40 years. The capacitive (impedance) TK-100 online dew point meter is a flagship product of Techne Measurement Co., Ltd. The TK-100 online dew point meter consists of the TK-100 transmitter, monitor, and sensor cable, allowing for easy initiation of dew point measurement. For more details, please download the catalog or contact us. #MoistureMeter

• Temperature and humidity measuring instruments

High-precision mirror-type dew point meter. It has a built-in pump, flow meter, and pressure sensor, allowing for accurate low dew point measurements.

● Dew point measurement range: -75 ℃dp to +20 ℃dp (MBW973S/E/CA) ● Realization of high response speed with ORIS function ● Built-in pump, flow meter, and pressure sensor (varies by model) ● Equipped with Stirling cooler (only for 973L) ■ The MBW973 dew point meter uses the ORIS (Optimum Response Injection System) function to forcibly add a small amount of moisture to the mirror surface, increasing the amount of condensation on the mirror surface. This achieves a reduction in the time required to stabilize in low dew point regions. Additionally, with the built-in pump, flow meter, and pressure sensor, measurements can be started immediately. Model selection examples: 【Low dew point range up to -80 degrees】→ MBW973L 【Low dew point range up to -60 degrees】→ MBW973S For more details, please contact us or refer to the catalog.

• Other measurement, recording and measuring instruments

An all-in-one unit that completes moisture measurement in oil!

★It can be installed as is and used immediately! ■ Polymer-based oil moisture meter ■ Moisture activity value measurement range 0-1 aw ■ Measurement in ppm is possible ■ TFT display option available* *There are also selection options such as a patrol light, so please refer to the basic information. The core moisture detection component of the EE360 oil moisture meter installed in TKZH002 uses a polymer sensor utilizing thin-film technology. *Only for the EE33 temperature and humidity dew point transmitter for high humidity and harsh environments. It is a high-performance, high-response moisture meter with minimal aging changes. Since it provides continuous online measurements, it alerts you to moisture levels and the timing for oil replacement before water contamination affects insulation performance.

• Other electronic measuring instruments

For oil deterioration diagnosis! Displays moisture activity value (aw), oil temperature (°C), and moisture content (ppm). A multifunctional handheld measuring device, Techneport Oil.

● Measurement of water activity value (aw) and oil temperature (°C) to calculate water content (ppm) ● TFT touchscreen ● 10 types of oil parameter settings available ● Data logging function (approximately 2 million points) ● One-point or two-point calibration using a simple calibration kit (optional) ■ TEKHNEport-Oil measures the water activity value (aw) and oil temperature (°C) in oil, allowing for the calculation of water content (ppm). It can store parameters for 10 different types of oil needed for conversion, enabling the management of multiple types of oil with a single unit. Using these parameters, more accurate measurements of water in oil can be achieved. Measuring water content in oil is useful for diagnosing oil contamination and degradation, ensuring that the timing for oil replacement is not overlooked.

• Analytical Equipment and Devices

Dew point measurement unit with built-in sampling equipment!

■ Ideal for spot checks ■ Simple operability ■ Choose a dew point meter based on application TK: Built-in TK-100 dew point meter for low dew points TE: Built-in TE-660 dew point meter for medium dew points ■ For measuring furnace atmosphere ■ For measuring chamber atmosphere This product is a portable all-in-one dew point meter equipped with a dew point meter and necessary sampling equipment. It includes a filter, needle valve, flow meter, and pump. The dew point meter features the well-regarded capacitive dew point meter TK-100 or the polymer dew point meter TE-660 manufactured by Techne Measurement Co., Ltd., known for its expertise in furnace dew point management. For applications with a lot of dust, an external pre-filter (optional-PF) is recommended. For more details, please download the catalog.

• Other electronic measuring instruments

Low-cost model for OEM oxygen concentration measurement in ppm/%!

● High value-added OEM model inheriting the concept of the 201RS/2001RS series ● Achieves low price ● Small and compact model ● Adopts self-developed galvanic cell type sensor that is resistant to combustible gases and organic solvents ■ Model 201LC/2001LC utilizes the same front panel and digital electronics as Model 2001RS, functioning as an oxygen analyzer for PPM and percent levels. Like other models, it uses our self-developed AMI galvanic cell type (electrochemical) sensor, excelling in basic performance such as response speed, reproducibility, and lifespan. * Compared to the 201RS/2001RS series, it does not have digital communication functions, but there are no differences in measurement range, accuracy, or response speed. ■ The sensor is a disposable cartridge type, allowing for easy manual replacement of the sensor from the front panel. For more details, please download the catalog or contact us.

• Other measurement, recording and measuring instruments

Measurement control panel for various measurements in atmospheric gas!

When measuring the dew point and oxygen concentration in the atmosphere gas inside the furnace, the gas is sampled with a pump, impurities are removed with a filter, and then measurements are taken.

• Other measurement, recording and measuring instruments

Regarding the "quotation" used at the forefront of sales activities: "Do we really need to save everything when we revise it to Ver.1, Ver.2, etc., every time the amount or specifications change?" "Should we also keep the data from other companies that were not selected in competitive quotations?" Have you ever wondered about these questions? The Electronic Bookkeeping Act strictly demands the "authenticity" of data, but saving every process is a significant burden for the field. This time, we will clearly explain the boundaries of the preservation obligation in a case study format, incorporating the latest interpretations from the National Tax Agency's Q&A. *You can read the full text from the note in the "Related Links." [Contents of this article] 1. The boundary of the preservation obligation lies in "sending to external parties." - Items sent externally are "generally required to be preserved." - Items not sent externally have "no preservation obligation." 2. The sender's judgment: "Is it linked to a transaction?" 3. The recipient's judgment: "The perspective of the 'Corporate Tax Act' is important." ■ Note! "Version revisions" and "corrections/deletions" are different things. ■ A smart way to achieve reliable "version management." ■ Summary

● This is a leak testing device for small electronic components that does not use fluorinated inert liquids (PFAS-free). ● There is no longer a need for unstable visual confirmation through liquid immersion testing. It adopts a quantitative testing method that allows for stable pressure leak testing. ● It is a tabletop leak testing device specifically for gross leaks, with accuracy equal to or greater than that of liquid immersion testing. ● The detectable range is approximately 1×10⁻² Pa·m³/s to 1×10⁻⁶ Pa·m³/s (varies depending on the target product). ● It is suitable for sealed structures ranging from a few millimeters to a maximum of 80 × 70 mm. Please feel free to contact us for more information!

Fukuda's new flagship model. - Masterless type (FLA-0200 series) - General type (FLA-0201 series) Two models of air leak testers. With the mastering correction function, high-precision measurements can be achieved in a short time. Please take a look at the catalog.

What is a sealed product air leak test device? It is an air leak test device that inspects the airtightness, sealing performance, and waterproofness of electrical equipment and packaging containers (cosmetics, food). It tests for leaks in products such as smartphones, tablet devices, keyless switches, wristwatches, bottle containers, and cosmetic containers (eyeliner, mascara).

【Leak testers and leak test-related products provided by Fukuda】 Please take a look at our catalog! ★ Millimeter-wave radar & LiDAR leak tester: The air leak tester "FL-610" for controlling the separate type leak tester air pressure unit "LPU-300." ★ Leak tester for simultaneous measurement of workpieces: Measures two workpieces with one unit. By comparing two at the same time, you can increase the number of operations. ★ Electric air regulator for blood pressure monitor pressure confirmation: Excellent in repeatability of pressure control and pressure adjustment. ★ Leak tester for automotive lighting: Can be tested at low pressure without affecting the workpiece (item under inspection). ★ Air leak tester conversion box/cable: Peripheral equipment for air leak testers. Used when replacing old models with current products or when changing the model of current products. ★ Waterproof inspection testing device: A device for testing the waterproofness (equivalent to IPX7,8) and sealing of sealed products. It can be used for various products such as electronic devices and packaging containers.