Maintenance and Resilience 2022 (Infrastructure Inspection and Maintenance Exhibition)

A compact and low-cost converter suitable for embedding in optical fiber sensors.

μMyotis is a compact converter that can be used with various sensors provided by Phonoptics, including acoustic sensors, dynamic pressure sensors Alpheus, vibration sensors, and tachometers (rotational speed meters). μMyotis features a built-in light source, photodiode, and microcontroller, making it ideal for integration into devices due to its smaller size compared to conventional products. ■ Compact size suitable for integration into devices ■ Built-in light source, photodiode, and microcontroller ■ Compatible with various sensors from Phonoptics, including acoustic sensors, dynamic pressure sensors, vibration sensors, and tachometers ■ Customizable PCB ■ Capable of connecting to IoT (Bluetooth, GPS, LORA/SIGFOX module, Ethernet, CAN, GSM, etc.) It can also be used in combination with the Phonoptics Breakout (sold separately). *For details on Breakout products, please contact us.

• Other measurement, recording and measuring instruments

It is a microphone that uses optical fiber technology and does not use electrical signals, allowing it to capture sound without being affected by electromagnetic waves or interference.

As a new value of the optical fiber acoustic sensor developed for detecting abnormal sounds in harsh environments, this product is specialized for capturing voice. - The microphone part is made of plastic and does not use electrical signals, so it is not affected by electromagnetic waves. - The microphone is undetectable by detection devices (cannot be found). - Equipped with VOX and Time trigger (recording timing can be programmed). - The microphone can be installed up to 10 km away from the unit. - The microphone (sensor) unit is compact and lightweight (2g). - The microphone's terminal is made of telecom fiber, allowing the use of existing fiber networks.

• Other measurement, recording and measuring instruments

For temperature monitoring of transformers, reliable temperature monitoring is possible without being affected by noise from EMI/RFI and high voltage environments.

OSENSA's fiber optic temperature sensor for transformers enables real-time temperature monitoring of transformers without being affected by noise in environments with EMI/RFI or high voltage. The basic configuration of this product consists of a temperature sensor probe, a transmitter, and software. The probe PRB-230 is designed for temperature measurement in oil-filled transformers and accommodates immersion and removal processes for various types of transformer oil. The transmitter is available in a type that can connect multiple probes with a single unit, allowing for simultaneous measurement of temperatures at multiple points.

• Thermometer

It is possible to perform accurate and highly reliable temperature measurements for research purposes in the fields of electricity and medicine.

Made of high-quality fiberglass, it achieves an extremely fast response time while being able to withstand temperatures up to 350°C.

• Other temperature and humidity measuring instruments

High resolution. A compact VNIR (470-900nm) hyperspectral camera suitable for research purposes such as mineralogy, pathology, material property evaluation, and art analysis.

The SNAPSCAN VNIR from imec is a compact and lightweight hyperspectral camera that can quickly acquire high-resolution hyperspectral data without the need for external moving parts, thanks to its built-in scanning mechanism. ■ Wavelength range: VNIR (470-900nm) ■ Snapshot capability The built-in scanning mechanism allows for snapshot imaging without the need for external moving parts. ■ High resolution (up to 7MP, 150 spectral bands) ■ High signal-to-noise ratio An active cooling system and advanced software features achieve a high signal-to-noise ratio. ■ Compact and lightweight < Evaluation Kit > In addition to the hyperspectral camera, an evaluation kit is also available, which includes key components such as lighting, tripod mounts, and analysis software.

• Other inspection equipment and devices

High-speed, robust, and high-performance hyperspectral camera suitable for industrial applications.

Hyspex Baldur is a hyperspectral camera equipped with high speed, flexibility, and robustness. ■ High Speed Capable of 1000 fps. *Even higher speeds are possible depending on specifications. We also offer high-speed software and inline integration support software, making it suitable for industrial applications.

• Color camera
• Monochrome camera

Mobile-type hyperspectral camera that easily and quickly acquires VNIR (500-1000nm) spectral data on-site.

The HAIP BlackMobile hyperspectral camera is a handheld hyperspectral camera that allows for quick and easy acquisition of hyperspectral data on-site. ■ Mobile-type hyperspectral camera - Easy operation and result display on-site with a touch panel display. - Built-in LED lighting - Wavelength range: 500~1000nm, 100 spectral bands - High signal-to-noise ratio in the NIR region - Also equipped with a 4K RGB sensor

• Other inspection equipment and devices

[Compact × High Performance] Proven results in component analysis, quality control, and research applications! Accommodates various measurement needs.

■ Line scan type hyperspectral camera ■ Compact and lightweight for easy field measurements ■ Acquires spectral data for each image pixel. ■ Abundant accessories to enhance measurements ≪Measurement wavelength range product lineup≫ ・330–800nm ・400–1000nm ・420–980nm ・900–1700nm ・1000–2500nm 《Configuration items》 ■ Benchtop system (for research) Hyperspectral camera Movable stage Tower Lighting Software (capture and analysis) Dedicated PC ■ Field system (for outdoor shooting) Hyperspectral camera Rotating scanning stage Tripod tray for dedicated laptop Battery Software (capture and analysis) Dedicated laptop

• Other measurement, recording and measuring instruments
• Other image-related equipment

We provide a complete system optimized for remote sensing for aircraft installation.

The Pika UAV, a hyperspectral camera system for UAVs, is a lightweight and compact device that is equipped with sufficient functionality. We offer it as a set, ensuring good compatibility and making it easy to implement for remote sensing applications.

• 3D measuring device

Drone-compatible, compact, lightweight hyperspectral system. Compatible with DJI drones (Matrice 300 RTK, Mavic 2).

The HyperSlit from Spectro-AG is a drone-compatible spectral system that can simultaneously capture spectra and RGB images spatially. ■ Compact and lightweight, compatible with DJI drones It can be mounted on DJI drones such as the Matrice 300 RTK. ■ Product models covering ultraviolet, visible, and near-infrared wavelength ranges It supports applications from UV to near-infrared for precision agriculture, vegetation, forestry, and minerals. ■ Calibration radiance sensor The compact and lightweight (380g) drone-compatible HyperSlit is equipped with a radiance sensor, allowing it to provide uniquely calibrated spectra across 1,000 bands.

• Other inspection equipment and devices
• Other image-related equipment

[Drone Compatible] Hyperspectral Camera Developed for UAVs

Hyspex MjoInir (Mjölnir) is equipped with all the systems necessary for aerial photography with hyperspectral cameras. It is compatible with various UAVs and also supports tripod photography on the ground. The system allows for communication control from the ground. ■Features: Provides solutions compatible with drones - Measurement wavelength range: 400~1000nm / 970~2500nm / 400~2500nm - Ground control software for advanced flight planning - High stability against wind - Built-in battery - Software integrated with drone cameras

• Analytical Equipment and Devices
• Color camera
• High Speed Camera

Corresponding to visible to near-infrared (up to 2500nm). A hyperspectral camera suitable for remote sensing, resource exploration, and research applications with high sensitivity and low noise.

The HySpex series hyperspectral cameras can be used for field, lab, and airborne system applications. ■ High S/N ratio ■ High spatial resolution and frame rate ■ Product lineup compatible with visible and near-infrared wavelength ranges (400–1000nm / 930–2500nm / 960–2500nm) ■ A wide range of accessories tailored to shooting conditions Suggestions available for aircraft, lab, and field systems (stages, navigation systems, dedicated tripods, etc.)

• Color camera

Drone-compatible, compact, lightweight VNIR hyperspectral camera. For remote sensing, precision agriculture, and vegetation analysis.

The BlackBird V2 is a drone-compatible hyperspectral camera capable of simultaneously capturing high-resolution, high-spectral-resolution hyperspectral images (HSI) in the wavelength range of 500 to 1,000 nm, from visible to near-infrared (VNIR), along with RGB images. ■ A compact and lightweight hyperspectral camera designed for drones This model is specially designed for easy integration with DJI's Matrice 200 and 300 series drones. Connecting to the drone via the DJI Skyport interface is also straightforward. ■ User-friendly with a wealth of features - Can be operated via remote control. - Functions such as remote camera trigger, live streaming of RGB images, and flight planning can be used with the DJI Pilot App. ■ Measurement wavelength range: 500 to 1,000 nm ■ Compact size: 80×60×90 mm, lightweight: 790g (including gimbal) ■ 540×540px, 100 spectral bands ■ High signal-to-noise ratio in the NIR region ■ Equipped with an RGB sensor, allowing simultaneous capture of HSI (hyperspectral images) and RGB images in the same spatial context.

• Other inspection equipment and devices

Covers UV to NIR from 350 to 1000 nm with a single device. Introduces light field technology. Provides high-resolution imaging data.

The "Hyperspectral Camera ULTRIS X20" is an innovative hyperspectral camera based on light field technology. It is equipped with a 20MP CMOS sensor, allowing for the acquisition of high-resolution data. The "ULTRIS X20" has an expanded measurement wavelength range compared to the conventional model "ULTRIS 20," now covering a wide range of wavelengths from 350 to 1000 nm, from ultraviolet to near-infrared, all in one device. 《 Features of ULTRIS X20 》 - Capable of capturing hyperspectral imaging data in video format - Measurement wavelength range: 350-1000 nm, 164 spectral bands - High resolution - 410×410 pixels - Compact (60 × 60 × 57 mm), lightweight (350 g) (standard model S20) - Robust housing compliant with IP standards - Capable of underwater shooting With its compact and lightweight design, it can be mounted on general drones. The 164 spectral bands and high spatial resolution of 410×410 pixels make it suitable for a wide range of applications, not only in laboratories and fields but also in UAV applications.

• Other inspection equipment and devices

Compact and lightweight VNIR hyperspectral camera

The HAIP BlackBullet V2 hyperspectral camera is a compact and lightweight hyperspectral camera designed to accommodate various applications such as laboratories, fields, and UAVs. - Compact size (80×60×90 mm) - Measurement wavelength range: 500~1,000 nm - 540×540 px, 250 bands - High signal-to-noise ratio in the NIR region - Equipped with an RGB sensor, allowing simultaneous acquisition of HSI and RGB images in the same spatial context Its small and lightweight design allows for easy implementation on various platforms, including field measurements using UAVs or tripods, laboratory measurements, and attachment to scan rail systems.

• Other inspection equipment and devices

Schunk will showcase the Schunk DuraPower graphite separator at the International Hydrogen and Fuel Cell Expo (FC EXPO) 2023. We invite you to learn about our attractive product lineup and the latest technologies (such as hydrophilic surface treatment for high-output fuel cell stacks and core thickness < 250 micrometers) and to utilize them in your company. The International Hydrogen and Fuel Cell Expo (FC EXPO) 2023 will be held at Tokyo Big Sight from March 15 (Wednesday) to March 17 (Friday). We will be exhibiting at the German Pavilion in West Hall 1, booths 3-6, so please come visit us! [Exhibited Product: Features of the Graphite Separator] ■ Excellent corrosion resistance ■ High conductivity ■ Extremely good mechanical strength ■ Very high design flexibility compared to other materials and manufacturing methods ■ Gas sealing properties ■ In-house mold design and manufacturing

YOMURA JAPAN will exhibit at "Medtec Japan 2026," one of the largest specialized exhibitions in Japan focused on the development and manufacturing of medical devices and healthcare products. Experience our one-stop service for medical device manufacturing, from development support using cutting-edge 3D printing technology to mass production at our ISO 13485 and US FDA certified factory in Taiwan. We also welcome inquiries about material selection and certification consulting at our booth.

We will be exhibiting at the 2026 Osaka Bioplastics Exhibition and Business Meeting. Manack will introduce wood powder composite resins and examples of their molding. Please be sure to check the texture of the molded products at the venue. Dates: March 12, 2026 (Thursday) 12:30 PM - 5:00 PM March 13, 2026 (Friday) 9:30 AM - 4:00 PM Location: MyDome Osaka, 1st Floor Exhibition Hall We will also be presenting at a mini-seminar at the same venue on the following dates and times: March 12, 2026 (Thursday) 2:15 PM - 2:20 PM March 13, 2026 (Friday) 11:15 AM - 11:20 AM

We will be exhibiting at OPIE 26' held at Pacifico Yokohama from April 22 to 24. Our booth will be L-37 (Light and Imaging Sensor & Imaging EXPO). We plan to showcase the 3D line sensor CLS2, a single-point thickness sensor, a distance sensor, and Enovasense, which can measure the thickness of opaque objects.

The semiconductor fundamentals course by Nisshinbo Micro Devices has received positive feedback with numerous participants each time. This time, we will hold a session titled "Teaching AFE (Basics)" – Understanding the Principles of ADC and How to Read AFE Data Sheets. Many people encounter situations where they have questions about how to read data sheets when using AFE. In this webinar, we will introduce how to read the AFE data sheets from Nisshinbo Micro Devices, assisting users in selecting the appropriate AFE. The difficulty level is beginner to intermediate, making it suitable for those who want to learn the basics of ADC, those who are unsure about selecting an AFE, and those who have questions. With recorded presentations and live chat Q&A with our engineers, even busy engineers can learn efficiently. ● Target Participants - Those who want to learn the basics of ADC - Those who have never used AFE - Those who are unsure about selecting an AFE - Those who want to know how to read AFE data sheets ● Agenda 1. Principles of ADC 2. Overview of AFE 3. How to Read AFE Data Sheets 4. Summary We look forward to your participation.