Exhibition Information ： 28th INTERPHEX Week Tokyo

This is a fully automated inspection device for pinholes in packaging engineering. It eliminates packaging defects based on certain quality standards. The targets include pillow packaging, pouches, etc.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Example of target work: pillow packaging, pouches, etc. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design allows connection to existing production lines - Quick changeover for product variety switching can be handled in a short time by replacing the chamber - Fully domestically produced, ensuring rapid response for maintenance and troubleshooting *Please consult us regarding the application of this product for pharmaceuticals.

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Other packaging equipment, materials and tools

Desktop machine for Container Closure Integrity Testing (CCIT)" "Device for testing the seal integrity of packaging containers

This is a leak testing device to confirm the airtightness of packaging containers. - Achieves improved reliability of formulations - Detects peeling, tearing, and the presence of pinholes in packaging containers, and displays differential pressure, leakage amount, graphs, etc. - Easy operation with a touch panel - Inspection targets: pillow packaging, PTP, three-side or four-side seals (packaged products), plastic bags (e.g., infusion bags), strip packaging (SP packaging), gusset packaging, stick packaging, jar containers, etc. - Usage locations: manufacturing offline, CMC laboratories, quality control testing laboratories, stability testing, etc.

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Other packaging equipment, materials and tools

Pseudo-defects with specified hole diameter and hole length (reference test piece). Please use for leakage testing or evaluation.

This is a pseudo-defect (reference test piece) that specifies hole diameter and hole length. It can be used in pressure change leakage testing methods and liquid immersion testing methods. It can be utilized for standard setting and validity evaluation using positive controls (defective product samples). - Evaluation of packaging integrity in accordance with JP18 - Setting of "maximum allowable leakage limit" - Testing for the intrusion of water vapor, oxygen, and microorganisms - Quantification from qualitative testing methods (converting current leakage standards to hole diameter)

• Leak Testing Equipment
• Defect Inspection Equipment
• Pinhole detector

Compliance with Container Closure Integrity Testing (CCIT)! Fully automated leak testing for pharmaceutical packaging (various vials, bottles, eye drop containers, cylindrical containers, etc.)!

Compliance with Container Closure Integrity Testing (CCIT) for pharmaceutical packaging Fully automated leak testing for various vials, bottles, eye drop containers, and cylindrical containers - GMP validation compliant - Data integrity compliant - CSV Category 3 compliant - Inspection accuracy confirmed by positive controls (Φ10 μm and Φ20 μm) * Conveyor is not included with this product. Specifications are subject to change without notice.

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Other packaging equipment, materials and tools

A wide range of leak testers and leak test-related products are available! We will propose leak inspection and leak testing tailored to your measurement environment and product environment.

In the catalog "Comprehensive Product Guide," we introduce the products handled by Fukuda Corporation. As leak testing machines, we offer a lineup tailored to leak rates, including flow meters/flow testers, air leak testers, hydrogen leak detectors, and helium leak test systems. We propose equipment and services that meet our customers' needs, regardless of the industry. [Contents] ■ Flow meters/flow testers ■ Air leak testers ■ Hydrogen leak detectors ■ Helium leak test systems ■ Dedicated airtightness testing equipment for small electronic components ■ Ultra-fine leak test systems Additionally, we have prepared technical materials such as "Technical Manuals" and "Proposals for Measurement Environment Improvement." Please take a look.

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Other packaging equipment, materials and tools

Please take a look at the catalog of leak testers and related products provided by Fukuda!

★ Millimeter Wave Radar & LiDAR Leak Tester: Air leak tester "FL-610" for controlling the separate type leak tester air pressure unit "LPU-300". ★ Leak Tester for Simultaneous Measurement of Workpieces: Measures two workpieces with one unit. By comparing two simultaneously, it can increase the number of operations. ★ Electric Air Regulator for Blood Pressure Monitor Pressure Verification: Excellent in repeatability of pressure control and pressure adjustment. ★ Leak Tester for Automotive Lighting: Can conduct tests at low pressure that does not affect the workpiece (item under inspection). ★ Air Leak Tester Conversion Box/Cable: Peripheral equipment for air leak testers. Used when replacing old models with current products or when changing the model of current products. ★ Waterproof Testing Device: A device that tests the waterproofness (equivalent to IPX7,8) and sealing of sealed products. It can be used for various products such as electronic devices and packaging containers.

• Other measurement, recording and measuring instruments
• Leak Testing Equipment
• Other inspection equipment and devices

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the 28th INTERPHEX Week Tokyo. At the exhibition, we will be showcasing 100% inspection equipment compliant with Container Closure Integrity Testing (CCIT) standards, as well as sampling inspection machines. We sincerely invite you to visit our booth at this opportunity and would greatly appreciate your attendance despite your busy schedule. Yours sincerely, [Dates] May 20 (Wed) - 22 (Fri), 2026 10:00-17:00 (JST) [Venue] Makuhari Messe, Japan 8 Hall Booth No. 41 - 36

Dear Sir or Madam, We hope this message finds you well and that your company continues to prosper. FUKUDA will be exhibiting at the AUTOMOTIVE ENGINEERING EXPOSITION 2026 YOKOHAMA. At this exhibition, we will be showcasing testing equipment such as Air Leak Tester for EV and Equipment Mounted Type Hydrogen Leak Detector. We sincerely hope you will take this opportunity to visit us. Yours sincerely, [Official Site] https://aee.expo-info.jsae.or.jp/en/yokohama/ [DATES] Wednesday, May 27, through Friday, May 29, 2026 10:00 a.m. - 5:00 p.m. [VENUE] PACIFICO Yokohama, Exhibition Hall, Booth No. ２７４ ※Online Exposition Website：Tuesday, May 19, through Tuesday, June 9, 2026

Our company will be exhibiting at the "JECA FAIR 2026 - 74th Electrical Construction Industry Exhibition" held at Tokyo Big Sight from May 27 (Wednesday) to May 29 (Friday), 2026. At this exhibition, we will introduce products such as the coreless current sensor (for reference), the "PAL-Plus typeE / PAL-Plus typeE2" suitable for simple electric power measurement in factories and facilities, and the management software "CEW-M4" that visualizes and manages power consumption and surplus capacity of equipment. 【Main Exhibited Products】 - Wire-wound coreless current sensor (for reference) - PAL-Plus typeE / PAL-Plus typeE2 - CEW-M4 Please take a look at our solutions that are easy to implement even in confined spaces or where power outage work is to be avoided, and that help solve on-site challenges. We sincerely look forward to your visit.

[Speaker] PwC Consulting LLC PwC Intelligence Manager Toshinori Tomizawa [Key Lecture Content] The defense industry is gaining attention as a field for growth strategy consideration, while also facing constraints such as declining birth rates, supply chain vulnerabilities, and uncertainties in business continuity. This lecture will reframe the defense industry not merely as a supplier of equipment but as an industrial structure that includes technology, supply chains, and economic security, based on the published report "Environmental Changes Surrounding the Defense Industry and Corporate Choices." It will then present the potential for Japanese companies to participate and the criteria for decision-making, centered around the "International Supply Model," which consists of three forms: export of completed equipment, international joint development and production, and regional maintenance hubs. [Lecture Items] 1. Environmental changes surrounding the defense industry 2. Structural constraints faced by Japan's defense production and technology base 3. "International Supply Model" based on international cooperation 4. Potential for Japanese companies to participate in the defense sector 5. Criteria for decision-making regarding involvement in the defense sector 6. Future outlook for the defense industry and choices required from companies 7. Q&A / Business card exchange

[Instructor] Kyoko Kawasaki, President and CEO, First Innovatec Co., Ltd. [Key Lecture Content] This seminar will explain the thinking necessary to enhance the quality of decision-making in research and development themes. In recent years, while the importance of research and development investment has increased, challenges have emerged where traditional cost-effectiveness and numerical indicators are insufficient for evaluation, particularly when the applications and markets for technology are uncertain. In such situations, it is crucial to not only gather data but also to reassess the "perspective on decision-making," including what to capture, how to interpret it, and under what conditions to make judgments. In this seminar, we will organize the basic structure of evaluation centered on the relationships between technology, applications, and markets, and discuss the factors that distort decision-making as well as the thought processes for making judgments on themes with high uncertainty. Additionally, we will address how to compare and select multiple research and development themes from various perspectives and how organizations should design their decision-making processes. The aim is not merely to introduce evaluation methods but to clarify what perspectives should be held in actual decision-making, thereby contributing to the improvement of the quality of judgment regarding research and development investments within one's own company.