Magnetic field mapping to reduce repetitive measurements in the research and development, manufacturing process, and installation adjustments of MRI devices! ⇒ Metrolab NMR Magnetic Field Camera MFC2046

This is a successor model that improved upon the MFC3045 magnetic field camera, which revolutionized magnetic field mapping of MRI magnets in the 1990s.

A very uniform magnetic field within a few ppm is required for MRI and similar technologies. NMR is the only magnetic measurement technology that can provide a magnetic field map with that level of precision. The conventional MFC3045 was a groundbreaking product that reduced the time required for magnetic field mapping from several hours to a few minutes, with a positioning error of less than 1mm, keeping human error and drift error at a negligible level. The MFC2046 is a new product that inherits the advantages of the conventional MFC3045 while implementing the following improvements: - Expanded the upper limit of the magnetic field strength that can be mapped from 7T to 30T - Reduced the minimum bore diameter that can be mapped from 220mm to 40mm - Increased the number of NMR probes that can be mounted on the probe array from 32 to 255

• Other electric meters
• Testing Equipment and Devices
• Magnetic field analysis/electromagnetic wave analysis

The magnetic field measurement device manufactured by Swiss company Metrolab can measure strong magnetic fields with high precision.

We offer a range of products that can measure strong magnetic fields exceeding 20 T with high precision of 10 ppb, comparable to "international metrological standards." At Metrolab, we provide the following products: ◆ NMR Magnetometers - PT2026 NMR High-Precision Teslameter - MFC2046 Field Camera ◆ Fluxmeters - FDI2056 High-Speed Digital Integrator ◆ 3-Axis Magnetometers - THM1176 Hall Magnetometer - TFM1186 Fluxgate Magnetometer - HMC9076 Hall Field Camera - MagVector MV2 3-Axis Magnetic Sensor Element ◆ Reference Magnets - PM1055 Palm-Sized Reference Magnet

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices
• Magnetic field analysis/electromagnetic wave analysis

Is it a precise and high-accuracy NMR magnetometer? Or is it a 3-axis magnetometer that can be carried anywhere and can measure various things? Please consider according to your application.

1. PT2026 NMR High-Precision Tesla Meter "Accurate and high-precision magnetometer" Features - NMR (Nuclear Magnetic Resonance): Accurate and high-precision magnetic field measurement technology - Probe measurement range: Supports both 1.5T and 3T with a single probe - High measurement rate: Up to 33 Hz - Upgradeable to Field Camera MFC2046 2. THM1176, TFM1186 Compact 3-Axis Magnetometer "Portable and capable of measuring various things" Features - Simultaneous measurement of magnetic field strength in X, Y, and Z axes - THM1176: Hall magnetometer - TFM1186: Fluxgate magnetometer - Connects to desktop PCs, laptops, and handheld PCs

• Other electric meters
• Testing Equipment and Devices
• Magnetic field analysis/electromagnetic wave analysis

The Tesla meter is also known as a magnetometer or gaussmeter. The PT2026 is a high-precision and accurate magnetometer using the NMR (nuclear magnetic resonance) method.

◆ Extremely high precision and accuracy in measuring magnetic flux density and magnetic field strength in strong magnetic fields - Wide measurement range: 38 mT to 30 T - Ultra-high precision: less than 10 ppb at 3T magnetic field - Capable of handling magnetic field gradients of 1000 ppm/cm at 1T magnetic field - Fastest measurement rate of 33Hz ◆ Pulse wave probe with flexible measurement range - One standard probe covers magnetic fields of 1.5T and 3T - 1326 probe: built-in 3-axis Hall element sensor - 1426 probe: suitable for narrow gaps, remote passive head - 1526 probe: suitable for narrow gaps, remote active head ◆ Rich features and expandability - Multifunctional software interface - Upgradeable to magnetic field camera MFC2046 - Upgradeable for multiple point measurements

• Other electric meters
• Testing Equipment and Devices
• Other inspection equipment and devices

This is a three-axis magnetic sensor element integrated into a single chip. It can simultaneously measure magnetic flux density (Bx, By, Bz) in the range of 0.1T to 30T.

When trying to incorporate a sophisticated magnetometer into individual electronic devices, the MV2 is an ideal choice. It is also used in various products from Metrolab for magnetic field measurement, and a system has been established for electronic device designers to utilize MV2 technology. ■ Output signals (Bx, By, Bz) can be obtained in analog or digital form. ■ A board that operates with Arduino equipped with MV2 is also available for sale as the "MV2 Evaluation Kit."

• Sensors
• Other measurement, recording and measuring instruments
• Magnetic field analysis/electromagnetic wave analysis

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact on the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

The "Mechanical Stitching Method" by Nichinichisui Road Machinery Co., Ltd. is a new technique that allows for the repair of metal cracks without the application of heat. By using special bolts and reinforcement plates, cracks are physically removed, and repairs are made without causing any thermal impact to the base material. Repairs can be carried out in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. ◎ For more details, please contact us. ◎ If a detailed technical explanation is needed, please contact us.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! With one molding process, different products with similar shapes or varying dimensions can be molded at the same time. This allows for the verification of multiple types in a short period.

Are you struggling to explain "safety" to the client using just drawings? - The risks in blind spots are difficult to convey to the client through drawings alone. - Safety measures often become a target for cost reduction, making it hard to communicate their necessity. - There is a concern that the client might say, "It's more dangerous than I thought," after completion. Risks that are visible to design professionals are not easily understood intuitively by clients who are outside the field. This document is not just a simple explanation of sensor functions; it is a guide to visually explain "why sensors are necessary in that location." It can be used directly as explanatory material for the client. Here are three key points for utilizing this document: 1. Visualization of Risks Blind spots during vehicle departure and contact risks within the site are illustrated clearly. 2. Clarification of Selection Criteria A comparison table outlines the differences between complex sensor types such as infrared, ultrasonic, and loop coils. 3. Diagram of System Configuration It illustrates not just the sensors alone, but how they combine with components like rotating lights and control panels, providing practical assistance for electrical equipment design. Please make use of this to prevent "rework after completion" and "accident risks."

In facilities operating nurse call systems, we have made the bed exit sensor wireless, allowing it to notify in conjunction with the nurse call system. By simply connecting the mat sensor "Foldable Thin Matt-kun," the body movement call "Ugo-kun," and the wheelchair body movement call "Ayumi-chan" to the transmitter HB-RS, you can make the bed exit sensor wireless. The infrared sensor "Just Place Pole-kun" has the transmitter HB-RS built-in. This helps prevent accidents caused by falls, slips, or wandering, contributing to the efficiency of medical operations. 【Features】 ○ Wireless conversion by simply connecting existing sensors to the transmitter HB-WSK. ○ The bed exit sensor notifies wirelessly in conjunction with the nurse call system. ○ Up to 5 transmitters can be registered with a single receiver. ○ The communication distance between the transmitter and receiver is approximately 10 meters. ◎ For more details, please contact us or download the catalog.